B10aa ошибка пежо боксер

Posts: 
652 
Threads: 
100

Joined: Nov 2011

Gents,

Need some help on this van with an error between the Airbag module (SDM) and the BSI (BCM).
SDM shows error: B0118 Fault configuration missing
BSI shows error: B10AA configuration not suited to the vehicle

Tried to learn SDM to configuration of BSI but this does not work. In Diagbox BSI adapt screen does not show that sync is required.

BSI is factory coded and can not be changed.
SDM does not have any configuration options.

I checked what is configured:
In BSI only driver airbag and pre-tensioner
In SDM driver and passenger airbag and pre-tensioners are coded.

Any idea how to get rid of this error?
Airbag light is on and dash KM flashes.

Posts: 
500 
Threads: 
157

Joined: Feb 2015

If i helped please use thanks+rep buttons

Posts: 
652 
Threads: 
100

Joined: Nov 2011

(10-06-2019, 01:24 AM)kcity Wrote: first need solved problem with bsi

Kcity, understand that the BSI configration does not match the SDM config.

But how to modify the configuration of the BSI.. says: Not possible to change the config using diag equipment… factory coded etc…

Posts: 
709 
Threads: 
28

Joined: Jun 2019

(10-06-2019, 01:28 AM)Msmax Wrote:

(10-06-2019, 01:24 AM)kcity Wrote: first need solved problem with bsi

Kcity, understand that the BSI configration does not match the SDM config.

But how to modify the configuration of the BSI.. says: Not possible to change the config using diag equipment… factory coded etc…

VIN Please ….

Posts: 
652 
Threads: 
100

Joined: Nov 2011

(10-06-2019, 02:08 AM)nono93 Wrote:

(10-06-2019, 01:28 AM)Msmax Wrote:

(10-06-2019, 01:24 AM)kcity Wrote: first need solved problem with bsi

Kcity, understand that the BSI configration does not match the SDM config.

But how to modify the configuration of the BSI.. says: Not possible to change the config using diag equipment… factory coded etc…

VIN Please ….

Hello nono93,

VIN: VF7YASMFA12455099

Posts: 
709 
Threads: 
28

Joined: Jun 2019

VIN: VF7YASMFA12455099

Hello bro,

your van :

no passenger air bag
no lateral driver airbag

so only frontal driver airbag, airbag module modified with wrong flash (crash off)

your bsi data is ok

Posts: 
652 
Threads: 
100

Joined: Nov 2011

(10-06-2019, 02:25 AM)nono93 Wrote: VIN: VF7YASMFA12455099

Hello bro,

your van :

no passenger air bag
no lateral driver airbag

so only frontal driver airbag, airbag module modified with wrong flash (crash off)

your bsi data is ok

Thanks bro,

So I have to ask the owner if he knows something about this, he only has the car for 1 year or so.
VAN came in with Air Suspension System problems. Did have a hard time to get connected to the controllers, but finally succeeded with additional adapter and new interface.
At first I saw CAN bus errors, but after CLEAR those were gone.

We replaced the pump and calibrated with new level values… this part is ok now.
How can I modify the configuration of the SDM module?
Why does it not take over the values stored in the BSI with Diagbox learn procedure?

I have attached the config as read from BSI and SDM.

Posts: 
709 
Threads: 
28

Joined: Jun 2019

SDM is factory configured for airbag option. yours is for only passenger airbag van.

You have to plug a simple front driver airbag module this is a list of compatible:

16 080 404 80

1358990080

6588 13

16 080 056 80

1358991080

16 171 168 80

16 326 439 80

16 326 437 80

1393755080

16 326 438 80

16 519 713 80

16 326 439 80

16 373 218 80

1638429180

1394325080

16 526 018 80

1393758080

no modification possible with diagbox .

Posts: 
652 
Threads: 
100

Joined: Nov 2011

Thanks for the list, very helpfull.

I also have UPA-USB and XprogM.
Any chance to do something with firmware?

Edit: forget to mention FVDI2014.