C7410 ошибка kyocera 3140

Модератор: vetal

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

Вернуться в Принтеры, МФУ, факсы, копиры формата A4

Кто сейчас на форуме

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 96

Правила форума
Картинки и фотографии (если они нужны в сообщении) надо загружать только как вложения к своему сообщению (через кнопку Добавить файлы). Тогда картинки будут автоматически отображаться в сообщении.

Код ошибки

Описание ошибки

Причина ошибки

0030

FAX control PWB system error
Processing with the fax software was disabled due to a hardware problem.

Defective FAX PWB.

0070

FAX PWB incompatible detection Error
Abnormal detection of FAX PWB incompatibility In the initial communication with the FAX PWB, any normal communication command is not transmitted.

Defective fax software. Defective FAX PWB.

0100

Backup memory device error

Defective flash memory. Defective main PWB.

0120

MAC address data error
For data in which the MAC address is invalid.

Defective flash memory. Defective engine PWB.

0130

Backup memory read/write error

Defective flash memory. Defective control PWB.

0140

Backup memory data error

Defective flash memory. Defective control PWB.

0150

Control PWB EEPROM error
Detecting control PWB EEPROM (U17) communication error.

Improper installation control PWB EEPROM (U17). Defective control PWB. Data damage of control PWB EEPROM (U17).

0170

Billing counting error

Defective control PWB. Data damage of control PWB EEPROM (U17).

0180

Machine number mismatch
Machine number of main and engine does not match.

Data damage of control PWB EEPROM (U17).

0420

Paper feeder communication error
Communication error between control PWB and optional paper feeder.

Improper installation paper feeder. Defective harness between control PWB (YC30) and paper feeder interface connector, or improper connector insertion. Defective control PWB. Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion.

0830

FAX PWB flash program area checksum error
A checksum error occurred with the program of the FAX PWB.

Defective fax software. Defective FAX PWB.

0840

Faults of RTC
The time is judged to go back based on the comparison of the RTC time and the current time or five years or more have passed.

Defective control PWB. The battery is disconnected from the control PWB.

0870

FAX PWB to control PWB high capacity data transfer problem
High-capacity data transfer between the FAX PWB and the control PWB of the machine was not normally performed even if the data transfer was retried the specified times.

Improper installation FAX PWB. Defective FAX PWB or control PWB.

0920

Fax file system error
The backup data is not retained for file system abnormality of flash memory of the FAX PWB.

Defective FAX PWB. Defective PF paper feed motor drive transmission system. Defective PF main motor. Defective control PWB.

1010

Lift motor error
During driving the lift motor, a motor overcurrent signal is detected for 5 s. This error is detected five times successively.

Defective bottom plate elevation mechanism in the cassette. Defective connector cable or poor contact in the connector. Defective drive transmission system of the lift motor. Defective lift motor. Defective engine PWB or connect-R PWB.

2000

Main motor error
The main motor ready input is not given for 2 s during the main motor is ON.

Defective harness between main motor (CN1) and control PWB (YC17), or improper connector insertion. Defective drive transmission system of the main motor. Defective main motor. Defective control PWB.

2200

Drum motor steady-state error
The drum motor ready input is not given for 2 s during the drum motor is ON.

Defective connector cable or poor contact in the connector. Defective drive transmission system of the drum motor. Defective drum motor. Defective engine PWB.

3100

ISU home position error

Defective FFC between CCD PWB (YC1) and control PWB (YC8). Defective FFC between control PWB (YC6) and scanner PWB (YC103), or improper FFC insertion. Defective home position sensor. Defective harness between ISU motor and scanner PWB (YC104), or improper connector insertion. Defective ISU motor.

3200

Exposure lamp error
The exposure lamp is not turned on.

Defective FFC between scanner PWB (YC103) and control PWB (YC6), or improper FFC insertion. Defective FFC between CCD PWB (YC1) and control PWB (YC8). Defective harness between CCD PWB (YC3) and inverter PWB (YC101), or improper connector insertion. Defective harness between inverter PWB (YC102) and exposure lamp, or improper connector insertion. Defective exposure lamp. Defective inverter PWB. Defective control PWB.

3300

AGC error
After AGC, correct input is not obtained at CCD.

Defective FFC between CCD PWB (YC1) and control PWB (YC8). Defective exposure lamp. Defective CCD PWB. Defective control PWB.

3500

Communication error between scanner and ASIC
An error code is detected.

Defective connector cable or poor contact in the connector. Defective CCD PWB. Defective main PWB.

4000

Polygon motor (laser scanner unit) error
The polygon motor ready input is not given for 6 s during the polygon motor is ON.

Defective harness between polygon motor and control PWB (YC10), or improper connector insertion. Defective laser scanner unit. Defective control PWB.

4200

BD error (laser scanner unit) error

BD sensor does not detect laser beam due to condensation on the polygon mirror. Defective laser scanner unit. Defective control PWB.

4700

VIDEO ASIC device error
Mismatch of reading data from two locations occurs eight times successively. Mismatch between writing data and reading data occurs eight times successively.

Defective connector cable or poor contact in the connector. Defective main PWB or engine PWB.

4700

VIDEO ASIC device error
Mismatch of reading data from two locations occurs eight times successively. Mismatch between writing data and reading data occurs eight times successively.

Defective connector cable or poor contact in the connector. Defective main PWB or engine PWB.

5100

Main charger high-voltage error
Five pages have been printed with the main charger output short-circuited.

Drum unit installed incorrectly. Engine PWB installed incorrectly. Defective engine PWB.

6000

Broken fuser heater wire
The temperature does not reach 100°C/212°F after the fuser heater has been turned on continuously for 30 s. The temperature does not rise by 1°C/1.8°F after the fuser heater lamp has been turned on continuously for 15 s during warm-up or at standby.(Only when the detection temperature is less than 200°C.)

Defective connector cable or poor contact in the connector. Fuser thermostat triggered. Broken fuser heater wire.

6020

Abnormally high fuser thermistor temperature
Fuser thermistor detects abnormally temperature.

Shorted fuser thermistor. Defective control PWB.

6030

Broken fuser thermistor wire
Input from fuser thermistor is 0 (A/D value).

Poor contact in the fuser thermistor connector terminals. Broken fuser thermistor wire. Fuser thermistor installed incorrectly. Fuser thermal cutout triggered. Fuser heater lamp installed incorrectly. Broken fuser heater lamp wire.

6220

Abnormally high fuser thermistor 1 temperature
The temperature of the fuser thermistor 1 detects 255°C/491°F or more continuously for 3 s.

Shorted fuser thermistor 1. Defective engine PWB.

6230

Broken fuser thermistor 1 wire
average AD value input from fuser thermistor 1 for 1.8 seconds is less than one.

Defective connector cable or poor contact in the connector. Broken fuser thermistor 1 wire. Fuser thermostat triggered. Broken fuser heater wire.

6400

Zero cross signal error
The zero cross signal does not reach the control PWB for specified time.

Defective harness between high voltage PWB (YC202) and control PWB (YC23), or improper connector insertion. Defective connection between power source PWB (YC103) and high voltage PWB (YC201). Defective power source PWB. Defective control PWB.

7000

Toner motor lock error
During driving the toner motor, a motor overcurrent signal is detected for 5 s.

Lump of toner inside toner container. Defective drive transmission system of the toner motor. Defective toner motor. Defective engine PWB.

7410

Drum unit non- installing error The drum unit is not installed or not installed properly. The drum PWB EEPROM does not communicate normally.

The drum unit is not installed. Defective connector cable or poor contact in the connector. Defective drum PWB EEPROM. Defective engine PWB.

9500

BRU communication error

IPU PWB error

9510

BRU PWB error

IPU PWB error

9520

BRU PWB data error

IPU PWB error

F000

Main PWB — operation panel PWB communication error

Defective main PWB. Defective operation panel PWB.

F010

Main PWB checksum error

Defective main PWB.

F020

Main PWB RAM checksum error

Defective main memory (RAM) on the main PWB. Defective expanded memory (DIMM).

F040

Main PWB — engine PWB communication error

Defective main PWB. Defective engine PWB.

F041

Main PWB — scanner communication error

Defective main PWB.

F050

Engine ROM checksum error

Defective engine PWB.

F051

Scan engine ROM checksum error

Defective engine PWB.