Добрый день друзья!
Принтер выдавал ошибку E000000 при включении даже не крутил барабан! Оказалось, что порвана термопленка.
Заменили, все сделали аккуратно, поставили, включили аппарат, но он снова выдает эту же ошибку.
Пытались сбросить через сервис-меню: CLEAR > ENGIN > ERRCLR, затем выкл-вкл принтер, он стал немного крутить барабан, но потом снова выдает эту же ошибку.
Печь прозвонили, все в порядке.
Можете подсказать, может нужно что-то ещё сбросить?
С уважением.
Добавлено спустя 53 минуты 22 секунды:
Вроде бы нашли проблему! Термодатчик нужно менять.
Подскажите его номерок или какие есть совместимые?
С уважением.
Thanks: 0
Likes: 0
Dislikes: 0
-
09-17-2015
#1
Junior Member
- Rep Power
- 0
error code e000000 in ir 2520
Hi everybody!
Thank you for accepting me here.
I am Godlove from Tanzania, East Africa.I have may Canon ir 2520 that when i tray to shoot on it gives a error message above (error code e000000 in ir 2520) if any one can help me to find solution. I have triad to replace a new HVT it still does the same
-
09-17-2015
#2
Service Manager
100+ Posts
- Rep Power
- 33
Re: error code e000000 in ir 2520
Originally Posted by GODLOVE
Hi everybody!
Thank you for accepting me here.
I am Godlove from Tanzania, East Africa.I have may Canon ir 2520 that when i tray to shoot on it gives a error message above (error code e000000 in ir 2520) if any one can help me to find solution. I have triad to replace a new HVT it still does the same
It is fixing error just reset it from the service mode.
Cheers
Senior Technician Specialist
A+; Network+
Copier Brand handled: Canon, Lanier, Konica Minolta, Sharp, Ricoh, Kyocera Mita, Nashuatech, Ollivetti, Toshiba
Printer Handled: Canon, HP, Epson, Brother, Samsung
Duplicators: Risograph, Duplo
-
09-17-2015
#3
Junior Member
- Rep Power
- 0
Re: error code e000000 in ir 2520
Originally Posted by _SuabE_
It is fixing error just reset it from the service mode.
Cheers
Thank you for your respond. Well i did try to clear it bay entering Service Mode >CLEAR>ENGIN>ERRCLR enter Service Mode >CLEAR>ENGIN>ERRCLR and finally power cycle the machine. It Cycle for a while then stop and turn again to the previously state of error e000000. If i may ask if is something to do with the blue n red cables on the Engine control er Circuits? Because i changed all to a new Control circuits or is something else ?
-
09-17-2015
#4
Junior Member
- Rep Power
- 0
Re: error code e000000 in ir 2520
Originally Posted by GODLOVE
Thank you for your respond. Well i did try to clear it bay entering Service Mode >CLEAR>ENGIN>ERRCLR enter Service Mode >CLEAR>ENGIN>ERRCLR and finally power cycle the machine. It Cycle for a while then stop and turn again to the previously state of error e000000. If i may ask if is something to do with the blue n red cables on the Engine control er Circuits? Because i changed all to a new Control circuits or is something else ?
Hello pleas help me with this problem. and if possible someone send an electrical wiring manual of this machinery
-
09-17-2015
#5
Junior Member
- Rep Power
- 0
Re: error code e000000 in ir 2520
Originally Posted by GODLOVE
Hello pleas help me with this problem. and if possible someone send an electrical wiring manual of this machinery
Helow! I hope someone is goner help me with a solution to my Machinery
I m still waitingThank you Technical Friends
-
09-17-2015
#6
Senior Tech
100+ Posts
- Rep Power
- 29
Re: error code e000000 in ir 2520
Replace fixing unit end reset than try with old unit.
-
09-18-2015
#7
Re: error code e000000 in ir 2520
If you got the E0000 error AFTER you replaced any boards & you can’t reset it in service mode I would suggest that you have a loose connection somewhere, go back & check the work you did.
If all looks good then may just be a coincidence & you’ll need to replace the fixing film ass’y
-
09-18-2015
#8
Junior Member
- Rep Power
- 0
Re: error code e000000 in ir 2520
Originally Posted by copier tech
If you got the E0000 error AFTER you replaced any boards & you can’t reset it in service mode I would suggest that you have a loose connection somewhere, go back & check the work you did.
If all looks good then may just be a coincidence & you’ll need to replace the fixing film ass’y
Thank you friends! I have removed older fixing and replace another one. Then shoot On the machinery started and engine rotate on its normal way. There after it change onto e000246. What do i do?
-
09-20-2015
#9
Trusted Tech
50+ Posts
- Rep Power
- 29
Re: error code e000000 in ir 2520
Originally Posted by GODLOVE
Thank you friends! I have removed older fixing and replace another one. Then shoot On the machinery started and engine rotate on its normal way. There after it change onto e000246. What do i do?
E246 means that AC power supply is not normal or bad power supply pcb.
error code e000000 in ir 2520
Originally Posted by GODLOVE
Bookmarks
Bookmarks
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
- BB code is On
- Smilies are On
- [IMG] code is On
- [VIDEO] code is On
- HTML code is Off
Forum Rules
Не так давно столкнулся с проблемой, что современные принтеры очень привередливы как к качеству бумаги или энергообеспечению, так и к многому другому. И все эти моменты тормозят рабочий процесс, а вызывать на каждую ошибку представителей сервис центров как минимум финансово не выгодно.
Проведя некоторое время в интернете нашел решения для некоторых ошибок, не скажу что они пропадают на вечно, но хотя бы на какой то промежуток времени рабочий процесс не останавливается.
Вот то что я проверил:
Модель: Canon imageRUNNER С1225
Ошибка: E021-0420
Метод решения:
заходим в service mode: Последовательно: Home (он же «домик») — 2 — 8 — Home (он же «домик»).
В показанном меню переходим:
COPIER->FUNCTION->CLEAR->ERR
Модель: Canon imageRUNNER 1435I
Ошибка: E002-0000
Метод решения:
заходим в service mode: Последовательно: *(она же «голова») — 2 — 8 — *(она же «голова»).
В показанном меню переходим:
COPIER->FUNCTION->CLEAR->ERR