Вы можете столкнуться с ошибкой 14 или 1-4 на роботе Roomba, если корзина устройства не закрывается должным образом или контакты корзины неисправны.
Как исправить ошибку Roomba 14
Проблема возникает, когда пользователь пытается использовать робот Roomba, но обнаруживает ошибку 14 (переустановите корзину, затем нажмите «Очистить»).
Вы можете столкнуться с ошибкой 14 или 1-4 на роботе Roomba (роботе-уборщике), если его пылесборник или разъемы загрязнены, и тщательная очистка устройства может решить проблему.
- Переверните пылесборник (где расположен вентилятор устройства) робота Roomba и открутите винты (обычно 4-6 винтов) на дне мусорного ведра.
Отвинтите пылесборник робота-пылесоса Roomba
- Теперь разберите бункер и очистите вентилятор от пыли / мусора. Вы можете использовать сильный воздушный поток или хорошо встряхнуть деталь, но не используйте в ней ничего острого или липкого. Если необходимо, вы можете попробовать удалить пыль с помощью ватной палочки. Также не забудьте очистить пространство над вентилятором.
- Затем не забудьте очистить вентиляционное отверстие в задней части бункера и не забудьте очистить вакуумное отверстие.
Очистите вентилятор корзины Roomba
- Теперь проверьте, свободно ли вращается вентилятор в бункере и не застревает ли он.
- Затем соберите блок и проверьте, устранена ли ошибка 14.
Если нет, то можно очистить контакты мотора и бункера. Вы можете использовать ластик для карандашей (или бритву), чтобы очистить контакты, но попробуйте сделать это на свой страх и риск.
Временные обходные пути
Если проблема не исчезнет, вы можете исправить ошибку 14 на своем роботе Roomba, попробовав следующие временные обходные пути, о которых сообщили пользователи, чтобы решить проблему за них:
- Извлеките и снова вставьте аккумулятор робота Roomba.
Извлеките и снова вставьте аккумулятор робота Roomba
- Убедитесь, что контакты не торчат из робота. Вы можете надеть нижнюю часть банки или полосу из металлической / оловянной фольги на сломанный кусок, чтобы обеспечить контакт с контейнером и корпусом.
Поместите лист оловянной фольги, чтобы создать контакт между контейнером и корпусом Roomba.
- Убедитесь, что контейнер для пыли правильно и плотно закрывается (вы можете нажать на стенки контейнера после снятия ручки). Вы также можете протереть стенки мусорного ведра наждачной бумагой, чтобы правильно установить его.
Если проблема не устраняется, проверьте, устраняет ли ошибка робота Roomba замена неисправной части (например, контактов корзины с eBay и т. Д.) Или всего мусорного контейнера.
RobotPoweredHome is reader-supported. When you buy through links on my blog, I may earn an affiliate commission. As an Amazon Associate, I earn from qualifying purchases.
I do a weekly deep clean of my Roomba to ensure optimal performance.
Following the routine, I cleaned my Roomba inside out last week but to my surprise, the vacuum stopped working.
Whenever I would start a cleaning session, the vacuum started flashing Error 14.
I didn’t know what went wrong since I followed my usual cleaning routine.
The issue persisted even after restarting the device. However, after troubleshooting the issue for some time, I was finally able to fix it.
The Roomba Error 14 means that the bin is either not installed properly or the bin sensors are broken. To fix this, firstly ensure that the bin is properly installed. If you are still getting an error, clean the bin sensors and power cycle the device.
What Does Roomba Error 14 Mean?
Error 14 on a Roomba generally means that there was an issue with the Roomba being unable to detect if a bin had been installed.
The Roomba either has failed to detect a properly installed Roomba, or you may not have installed the bin correctly.
This error code can also show up as Error 1-4 in some Roomba models.
Ensure The Bin is Properly Installed
To fix the Roomba Error 14, make sure that you have installed the bin such that the metal contact points on the bin are touching the contact points on the vacuum.
In some Roomba models, such as the 600 series, there is a small switch that is pressed when the bin is properly installed. If you have a 600 series Roomba, make sure you install the bin such that it presses the switch.
Since the Roomba Error 14 is pretty much similar to the Roomba Bin Error, it is best to remove and reinstall the bin.
This will reset the bin contact sensors. Just press the release button of the bin, take it out, wait for a few seconds, and reinstall it.
Also, make sure that there is no damage to the bin or the contact sensors.
Clean The Roomba Bin, Contact Sensors, and Filters
If the bin, contact sensors, and filters are not clean, the vacuum will not be able to detect the bin.
Release the bin and remove the filters. Wash both under running lukewarm water. Make sure to reinstall them only when they are completely dry.
Note that if you have a Roomba that uses disposable filters, you cannot wash them and will have to replace them.
Before installing the bin and the filters, clean the bin contacts on both, the bin and the vacuum using a clean melamine foam.
Install The Filters Correctly
If you have recently cleaned your Roomba and have started receiving Error 14 soon after, there’s a high chance that you have not installed the filters correctly.
The filter should be properly clicked in its place and should be aligned correctly.
Soft Reset The Roomba By Reinstalling The Battery
Soft resetting your vacuum can help fix temporary issues caused by software bugs. Here is how you can perform a soft reset:
- Flip the Roomba onto its back.
- Loosen all screws, including the one at the spinning brush.
- Remove the bottom cover.
- Lift the two tabs on the battery to remove it.
- Wait for at least 10-15 seconds and put the battery back in.
- Reassemble everything back by retracing your steps.
After you close everything up, flip the Roomba over to its correct side and let it run through its cleaning routine.
Check if it runs into Error 14 again.
If Nothing Else Works, Contact Customer Support
If you are still having trouble with Error 14 and none of these troubleshooting steps have worked for you, contact iRobot support.
They will inspect your vacuum and will ask you to get a bin replacement if necessary.
You May Also Enjoy Reading
- Roomba Error 11 – Ensure Your Vacuum Is Clean
- Roomba Error 38 – It Is A Communication Error
- Roomba Clean Button Not Working – It Can Be A Software Glitch
- Roomba Charging Error 1 – Keep The The Battery Compartment Clean
Frequently Asked Questions
Why is my Roomba going backward?
The reason why your Roomba goes backward can sometimes be attributed to a blocked or jammed front wheel. When the wheel is jammed in the forward direction, the Roomba thinks it cannot go forward because of some obstacle and will try to move backward to clear that obstacle.
What does it mean when Roomba flashes clean?
When the Clean button on your Roomba flashes when it is on its home base, it means that it is updating its software.
How long should I let my Roomba run?
iRobot recommends you run the Roomba for its entire cleaning cycle according to the schedule you’ve set, and this can take upwards of 20-40 minutes because it depends on the size of your home.
Does Roomba memorize your house?
Roombas use their advanced sensors on the front of the robot to learn the layout of your home and makes a map of it. The Roomba then uses this map to clean your home according to a schedule that you set.
Fully charged? Check. Plugged Home Base? Check. Set a cleaning schedule? Check.
Your Roomba is ready to go out into the world.
Until… “Uh-oh.” *beep*
Your Roomba’s display shows “Error 14.”
Don’t panic.
Instead…
Read on to find out:
- Why your Roomba displays “Error 14”.
- 5 easy steps to solve “Error 14” in seconds.
- How often you should clean each part of your Roomba.
- Why you should check the condition of your Roomba’s dustbin.
- And much, much more…
What does it mean when Roomba displays error 14?
When your Roomba displays “Error 14”, it means it’s not detecting an installed bin. This is due to the sensors, bin, and filters getting too dirty to work. Also, your Roomba’s software may be corrupted. Your dustbin isn’t firmly placed and has damages. Or the battery is low.
#1: The sensors, filters, and bin are dirty
Don’t neglect your Roomba. After all, it does all the dirty work for you. Getting on the ground. Getting rid of all that dust, dirt, and grime.
It dives into the hard-to-reach areas of your home. As a result, it gets filthy.
The Roomba is made up of sensitive parts. It has sensors, filters, and a bin.
Your Roomba has 3 types of sensors, which are:
- Cliff sensors.
- Full bin sensors.
- Floor tracking sensors.
Cliff sensors detect changes in the floor’s level. Like staircases, steps, or ledges. It helps the Roomba swerve or stop.
Full bin sensors alert you when the bin needs cleaning. And floor tracking sensors get the room’s data. Like the location of walls and furniture.
For Error 14, the full bin sensors are significant. These can sense an installed bin. Once these get dirty, they don’t function well. And so the Roomba can’t detect the bin.
Another part to check is the filter. The filter sifts the dust into smaller particles. Which then goes into the bin.
Some dust, wool, or bigger objects may accumulate there. Then, they end up on other parts of the device.
The bin catches everything passing through the filter. This may be the dirtiest part of your Roomba.
“So, how often should I clean the sensors, filters, and bin?”
For the floor tracking sensors and cliff sensors, once a month. The full bin sensors need it every 2 weeks.
Have the Roomba running daily? Clean the filter once a week. If you have hairy pets, twice a week. Also, replace the filter every 2 months.
Empty the bin after cleaning. It wouldn’t hurt to wipe it too.
“What’s the safest way to clean these parts?”
Before starting, you can see what the sensors look like:
Step 1: Have a microfiber cloth in hand. Make sure it’s clean.
Step 2: Flip over the Roomba. Locate the sensors. Each model may differ. Some sensors are found under the device. You may check your Roomba’s manual.
Step 3: Gently wipe the sensors with the cloth.
Step 4: Now, you have to disassemble the bin unit. So that you can reach the filter and the bin. Before that, clean the fan too. Use a Q-tip for this. This is to reach the smaller corners. Expect this part to be covered in dust too.
Step 5: To clean its filter, look for the release button. It’s on top of your Roomba. Slide the bin out. Then, empty the bin. Press the yellow lever to open it.
Step 6: The filter is usually colored blue. Push the tabs on each side. Then, pull the filter out.
Step 7: Tap the filter inside your garbage can. Repeat until all the dust is gone. Once done, slide it back.
You can also scrape the dust off using a paper towel. Or use a hand vacuum. Never clean your filter with water. Once done, slide it back.
You can clean the bin with water. Rinse it with only warm water. Make sure no debris gets stuck on the sides.
Once everything is put back, check if error 14 persists.
Learn more: How often do you need to empty your Roomba?
#2: The firmware is corrupted
Software bugs are a device’s biggest enemy.
Your Roomba operates on software too. The latter can malfunction sometimes. Especially when you’ve used it for so long. But not necessarily.
Most likely, it may need a break. Or a deload. And start all over again with a clean slate.
If the software is laggy, the other parts won’t do their jobs. Then, the error appears.
To resolve this, there are 3 ways:
- Resetting the device.
- Restarting the device.
- Reinstalling the battery.
“How do I restart my Roomba?”
This depends on which model you own.
For the I Series and S Series Roomba, press the Clean button. Hold it for 20 seconds. You’ll see the white light around the button spin clockwise. When this happens, release the button. Wait for the Roomba’s white light to turn off. This only takes a few minutes.
For the 700, 800, and 900 Series Roomba, press the Clean button. Hold it for 10 seconds. Release when it beeps. Then, your Roomba will reboot.
Still didn’t work? Move to the next step.
“How do I reset my Roomba?”
A factory reset may help. Like how you study for weeks. And finally, finish taking the big exam. You’d want to clear your mind ASAP.
That’s how your Roomba feels.
A reset deletes all custom settings, maps, and schedules. Make sure to note all your data before doing this. Also, check that your Roomba is connected to the iRobot Home app.
To reset, open the iRobot Home app. Go to Settings. Choose Factory Reset. Confirm the prompt that will appear. Wait for it to finish resettings.
If this fails, open the app again. Disable the Edge Clean Mode. This mode tells your Roomba to focus on the outer edges of a room. You can find this in Cleaning Preferences.
“How do I reinstall the battery?”
No improvements? Let’s do something with the battery.
To reinstall the battery:
- Completely turn off the Roomba.
- Turn the Roomba over on its back. Get a screwdriver. Loosen the screws. Don’t forget the one at the spinning brush.
- Remove the bottom cover. Lift the two tabs of the battery. Then, remove it.
- Wait for at least 15 seconds. Insert the battery.
- Close the cover, and put back the screws.
- Turn the device back on. This should resolve the error.
#3: The dustbin isn’t placed firmly
The sensors are cleaned. And the software got a refresh. But Error 14 continues to flash. Mocking you in a way.
Get it together! There’s still another solution.
Your Roomba may not detect the bin. All because it isn’t secured firmly. It should be installed correctly. So that the sensors can pick it up.
“What’s the right way to install the bin?
To install the bin:
- Press the release button.
- Take the dustbin out.
- Put the dustbin back. Make sure it closes properly.
- Press down on the bin’s sides. Do this after removing the handle.
Another tip is to rub the sides of the bin with sandpaper. This ensures proper placement.
There shouldn’t be anything sticking out. Use aluminum if there are loose corners.
Once reinstalled, press the Clean button. See if it cleared the error.
#4: The dustbin is damaged
What if the problem lies within the dustbin itself?
Now that you’ve been navigating through every part of your Roomba…
You may have noticed. Cracks, scratches, dents – all over your dustbin.
A busted dustbin disrupts your Roomba’s processes. The sensors may not detect due to being deformed.
“How often should I change my Roomba’s dustbin?”
There isn’t any specific lifespan for its bin.
But if there are any significant defects. Like the changes in its shape. Or even broken pieces. Then, you should probably get a new one.
Follow the steps in removing the dustbin. Buy a dustbin from a trusted store.
You can get a replacement bin. This is explicitly sold under the Roomba brand.
Note: Minor damages like surface-level scratches don’t affect your Roomba’s performance.
#5: The battery is dying
Admit it. Skipping your morning coffee makes life a gazillion times more difficult.
You lose your focus. You feel like falling asleep. And you get grouchy – really grouchy. Over the tiniest things.
Like how caffeine turns into your energy source. Your Roomba relies on its battery to function.
A weak battery may cause some processes to crash.
“How do I know that I need to charge my Roomba?”
See a flashing red light on your Roomba? That means its battery is running out.
A solid red light stands for a completely drained battery.
Note: Your Roomba’s Home Base should always be plugged in. That way, it is always ready for charging.
Two ways to charge your Roomba are:
- Using the Home Base.
- Using only a power supply.
After cleaning, your Roomba returns to the Home Base. It also goes there when its battery is low.
You can also charge your Roomba by plugging it into a wall socket.
Warning: Don’t wait for days before charging your Roomba. This can damage the battery.
An amber red pulse light means it’s charging. A solid green light means it’s full.
There’s also a 16-hour refresh charge. This is when the Roomba has been away from the Home Base for a long time.
The Roomba starts this by itself. It refreshes the battery. And also extends the battery life.
The battery can work for up to two hours.
“Can I change my Roomba’s battery?”
A Roomba’s battery can be replaced. It doesn’t take much technical know-how to take it out.
Remember: A Roomba’s lifespan is 2 to 6 years. But a battery’s life depends on how much TLC it gets.
You should consider getting a new battery if yours:
- Doesn’t charge.
- Quickly drains in less than two hours.
- Is almost at the device’s maximum age of 6 years.
Buy it from a trusted manufacturer. Be sure it’s the same battery you had previously.
Reading tip: Roomba Not Charging: 9 Ways To Fix It In 30 Seconds
Bonus: More tips!
Whether you’re a Roomba newbie. Or a seasoned user. It wouldn’t hurt to know these. So you can make the most out of your Roomba!
“Should I charge my Roomba after every cleaning?”
It may take an hour or less for your Roomba to clean.
Once the flashing red light appears, charge it. Don’t wait for the battery to drain. This can damage it.
“Is my Roomba waterproof? Can it clean spills?”
Your Roomba shouldn’t get wet. It can only pick up dust and dirt. And other solid materials.
The same goes for the Roomba brushes. They can only be a little damp when cleaned using alcohol wipes.
Your Roomba should only clean on dry floors and surfaces.
One more thing: Never let your Roomba clean dog poop. Or any waste, for that matter. It can only clean pet hair.
“Can I still use my Roomba without Wi-Fi?”
Without Wi-Fi, you have to press the Clean button. Every time you want it to clean.
You need Wi-Fi to make use of scheduled cleaning times.
“Does my Roomba have a warranty?”
Your Roomba has a one-year warranty. You can file a warranty claim here. Especially if you experience issues within a year.
Once they receive your claim, they check the issue, making sure it’s covered by the warranty.
If approved, they’ll either:
- Fix the Roomba.
- Give you a new product of the same model.
- Give you a new product with an upgraded function.
They will decide which option to do for you.
The repaired Roomba is under a 90-day warranty. The new products are covered by the same warranty you had. For the remaining period.
They won’t accept the claim if the Roomba:
- Has broken seals.
- Has changed or replaced parts.
- Has a short-circuited or tampered battery.
- Is damaged due to power or Wi-Fi issues.
- Is broken due to mishandling, accidents, or improper packaging.
Never use any cleaning solutions. And never change your Roomba’s parts. Unless these parts are from the official store.
You might also want to check out: 6 Steps To Fix “Roomba Error 2” In Seconds (How-To)
When your Roomba shows Error 14, it indicates that you need to reinstall the dust collector bin. If the bin is already correctly installed, then you should clean the Roomba of dust and grime. Alternatively, you can restart or reset the robot.
My friend recently got a Roomba and was so excited to use it. But then, one day, the Roomba stopped working and displayed an error code 14. We had no idea what this meant, so we decided to do some research.
In our research, we found out that Error 14 or 1-4 means that the Roomba is not detecting an installed bin. To fix this issue, we needed to check the bin contacts and make sure that the bin was installed properly.
We also learned that it could be helpful to wipe down the contacts on both the robot and the bin with a dry cloth.
However, it could be due to a malfunctioning battery or dustbin damage too.
So, I decided to put everything in this blog to make our research helpful for others as well. Here are some other Roomba error codes that we found in our research.
What does Error 14 mean on Roomba?
If you see Error 14 on your Roomba, it may mean that the Roomba is having trouble detecting whether the bin is correctly installed.
This error code can also appear as Error 1-4 in some models.
Check that the bin is properly installed, or else the Roomba may not be able to detect it.
Why am I getting Error 14 on my Roomba?
The Roomba may display Error 14 if it is unable to detect a properly installed dust bin.
This can occur if the dust bin has been installed incorrectly or if the Roomba is not able to detect it even when it has been installed correctly.
The error could be caused by a build-up of dust and grime on the Roomba if it hasn’t been cleaned in a while. This build-up can prevent the Roomba from detecting whether the bin has been properly installed.
How do I fix error 14 on Roomba?
To troubleshoot this issue, you should follow these steps:
First, check if the bin is properly seated in the Roomba. If it’s not, remove and reinstall it.
Second, look for any obstructions that might block the sensor, such as dust or pet hair.
Different Roomba models have different sensor contact locations.
In Roomba 600 and 700 series, the contacts are situated on top of the dustbin in the center,
while in Roomba 800 and 900 series, there are two contacts located on the top left and right sides of the dustbin.
To clean any built up debris off the contacts, use a lightly dampened melamine foam or Magic Eraser.
Re-install Roomba’s Bin
For this error, iRobot recommends removing and reinstalling the dust collector bin and ensuring that it is properly installed.
- First, press the bin release button and remove the bin.
- Then, inspect the bin for any damage before placing it back in and ensuring a proper fit.
If the issue persists, replace the bin with an authentic part available on store.irobot.com. Once the new bin is installed, press “Clean” button on the Roomba and monitor for Error 14.
Clean Your Roomba Vacuum
If you clean your Roomba, it could help you with detection issues or Error 14.
Here are the steps for cleaning your Roomba:
- Turn off the Roomba and flip it over.
- Remove the plastic panel by unscrewing the bottom of the Roomba near the bin unit.
- Use a can of compressed air or Q-tips to clean the inside of the Roomba, including difficult-to-reach areas.
- Reattach the plastic panel and screw everything back in place.
Re-install Roomba Battery
If your Roomba is experiencing temporary issues, reinstalling the battery can act as a soft reset and potentially help resolve the problem.
This process is straightforward and can be completed in under five minutes.
To re-install your Roomba battery, follow these steps:
- Turn the Roomba over onto its back.
- Loosen all screws (including the one located near the spinning brush), and then remove the bottom cover.
- Lift both tabs and then remove the battery. After removing the battery, wait for 10-15 seconds before putting it back in.
- Install all the unscrewed parts as it was before.
Once you have finished closing everything, turn the Roomba over to its proper side and allow it to perform its cleaning cycle. You can also use a replacement battery (if available) and check if this solves the issue.
Do Roomba Battery Reset
The Roomba has a battery reset function that can resolve temporary issues and restore some of the lost charge cycles of the battery.
To reset the battery on your 500 or 600 series Roombas, follow these steps:
- Press on the Clean button.
- Now, press and hold the Dock and Spot buttons for 15 seconds.
- Release the buttons when you hear a beep.
- To ensure your Roomba is fully charged, place your Roomba on the charging dock for at least 10 hours or until the Clean button displays a green light.
To reset battery on a 700 series Roomba:
- Connect the Roomba to either the charging dock or the charging cable.
- Now, press and hold the Clean button for at least 10 seconds.
- When the screen displays “r5t” and you hear a beep, release the button.
- Let your Roomba charge for around 15 hours.
Restart Your Roomba
If Error 14 was caused by a temporary software glitch, rebooting the Roomba can help. However, it’s important to follow the specific rebooting steps for your particular Roomba model as they can vary between models.
For restarting an s Series Roomba, follow these steps:
- First of all, press and hold the Clean button on your Roomba for 20 seconds.
- Now, release the button once the white LED light ring around the bin’s lid starts spinning clockwise.
- After a few minutes, the Roomba will turn back on. You’ll know the restart is complete when the white light turns off.
Here’s how you can restart an i Series robot vacuum
- Press and hold the Clean button for 20 seconds.
- Release it when the white light around the button starts spinning clockwise.
- Wait for a few minutes until Roomba turns back on.
- The restart is complete once the white light turns off.
Here’s how you can restart your 700, 800, or 900 Series Roomba:
- Press and hold the Clean button for approximately 10 seconds.
- Release the button when you hear a beep.
After rebooting, allow your Roomba to complete its schedule and check if the error occurs again.
Reset Your Roomba
If cleaning or restarting your Roomba didn’t solve the issue, try doing a factory reset on it. Ensure to connect the Roomba to the iRobot Home app on your phone.
To perform a hard reset on your Roomba, follow these steps:
1. Open the iRobot Home app and go to “Settings.”
2. Look for “Factory Reset” and select it.
3. Confirm that you want to reset your Roomba by accepting the prompt.
4. Allow your Roomba to complete the factory reset procedure.
After the reset is finished and the Roomba can function, run a cleaning cycle and check if Error 14 is still happening.
Contact Support
If you’re still unable to resolve Error 14 using the troubleshooting steps provided, you can contact iRobot support for more personalized tips specifically for your Roomba.
They can also assist in deciding whether to send in your robot for service.
Conclusion
Make sure that your Roomba can still charge after you have reinstalled the bin following the disassembly of the robot. Other users have reported encountering the “Charging Error 1” on their Roomba after changing or reinstalling a battery.
If you experience this problem, make sure to reinstall the battery correctly.
To resolve other charging issues, you can clean the battery charging contacts with rubbing alcohol to remove any accumulation of dust or grime.
Frequently Asked Questions
Why is my iRobot not working?
If your irobot is not working, check that all connections between the robot and its power source are secure. Additionally, make sure to use a reliable power outlet for charging.
If these connections appear to be functioning properly, try resetting the robot by pressing the Reset button on the bottom of the device.
If this does not work, contact iRobot customer support for further assistance. They will be able to guide you through troubleshooting processes or provide a replacement if necessary.
Additionally, make sure that the cleaning area is free of any obstacles such as objects, cords, and furniture. If any of these are blocking the robot’s path, it may cause your iRobot to malfunction or become stuck.
How do you do a hard reset on Roomba?
To perform a hard reset on your Roomba, you will need to:
1. disconnect the robot from its power source.
2. Then, press and hold the “Clean” and “Spot” buttons simultaneously for 10 seconds. This will initiate a factory reset that will restore all of your Roomba settings to their original defaults.
Once the reset is complete, you can reconnect the robot to its power source and it will be ready for use.
Be sure to configure your Roomba’s settings according to your needs before beginning any cleaning cycles.
How do I know if my Roomba battery needs to be replaced?
To determine if your Roomba battery needs to be replaced, pay attention to the following signs:
–If the Roomba’s run time has decreased significantly—for example, if it used to last for an hour but now runs for only 15 minutes.
-If your Roomba is failing to return to its charging dock before it runs out of power.
-If the Roomba is taking a long time to charge and not reaching full charge.
-If your Roomba’s battery indicator light stays red or flashes yellow, which indicates that it is running low on power.
If you notice any of these signs, it is most likely time to replace your Roomba battery.
About Robbert Randy
Robbert Randy
Robbert graduated from the University of Applied Science with a degree in Commercial Economics in 2019. A few years before he finished his education, in January 2020, Robbert created a website about vacuum cleaners with his brother. The two didn’t do it for profit–they simply wanted to research the best models out there and share their findings.
Introduction
Roomba Error 14 is an error code that is displayed on iRobot Roomba robotic vacuum cleaners. This error code indicates that the Roomba has encountered a problem with its navigation system. It is important to understand the cause of this error code and how to resolve it in order to keep your Roomba running smoothly. This article will provide an overview of Roomba Error 14, its causes, and how to fix it.
What is Roomba Error 14 and How to Troubleshoot It
Roomba Error 14 is an error code that is displayed when the Roomba robotic vacuum cleaner is unable to detect its Home Base. This error can be caused by a variety of issues, including a malfunctioning Home Base, a low battery, or a blocked signal.
In order to troubleshoot Roomba Error 14, the first step is to check the Home Base. Make sure that the Home Base is plugged in and that the power light is on. If the power light is not on, try unplugging and replugging the Home Base. If the power light still does not come on, the Home Base may need to be replaced.
If the Home Base is functioning properly, the next step is to check the Roomba’s battery. If the battery is low, the Roomba will not be able to detect the Home Base. Try charging the Roomba’s battery and then attempting to dock it again.
If the battery is not the issue, the next step is to check for any obstructions that may be blocking the signal from the Home Base. Make sure that there are no objects blocking the path between the Roomba and the Home Base. If there are, move them out of the way and try docking the Roomba again.
If none of these steps resolve the issue, it may be necessary to reset the Roomba. To do this, press and hold the “Clean” and “Spot” buttons simultaneously for 10 seconds. This will reset the Roomba and should allow it to detect the Home Base again.
If none of these steps resolve the issue, it may be necessary to contact the manufacturer for further assistance.
Common Causes of Roomba Error 14
Roomba Error 14 is an error code that indicates a problem with the Roomba’s cliff sensors. The cliff sensors are responsible for detecting changes in flooring, such as a drop-off or stairs, and preventing the Roomba from falling off. Common causes of Roomba Error 14 include:
1. Dirty or damaged cliff sensors: The cliff sensors can become dirty or damaged over time, which can cause them to malfunction and trigger Error 14.
2. Low battery: If the Roomba’s battery is low, it may not have enough power to properly detect changes in flooring, resulting in Error 14.
3. Incorrectly installed cliff sensors: If the cliff sensors are not installed correctly, they may not be able to detect changes in flooring, resulting in Error 14.
4. Software issues: If the Roomba’s software is outdated or corrupted, it may not be able to properly detect changes in flooring, resulting in Error 14.
How to Avoid Roomba Error 14
Error 14 is a common error code that can occur when using a Roomba robotic vacuum cleaner. This error code indicates that the Roomba is stuck in a loop and is unable to move forward. Fortunately, there are a few steps you can take to avoid this error code and keep your Roomba running smoothly.
First, make sure that the area you are cleaning is free of any obstacles or debris that could be blocking the Roomba’s path. If the Roomba is blocked by an object, it will be unable to move forward and may become stuck in a loop.
Second, check the Roomba’s brushes and wheels for any signs of damage or wear. If the brushes or wheels are damaged, they may be unable to move the Roomba forward, resulting in the error code.
Third, make sure that the Roomba is not stuck in a corner or other tight space. If the Roomba is stuck in a corner, it may be unable to move forward and will become stuck in a loop.
Finally, make sure that the Roomba’s sensors are clean and free of dust or debris. If the sensors are blocked, the Roomba may be unable to detect obstacles and may become stuck in a loop.
By following these steps, you can help avoid Roomba error 14 and keep your Roomba running smoothly.
Tips for Maintaining Your Roomba to Prevent Error 14
1. Empty the dustbin regularly: Make sure to empty the dustbin after every cleaning cycle to prevent the Roomba from becoming clogged and overworking itself.
2. Clean the brushes: Regularly check and clean the brushes to ensure that they are free of debris and dirt.
3. Replace the filter: Replace the filter every two months to ensure that the Roomba is able to effectively clean the air.
4. Clean the sensors: Clean the sensors regularly to ensure that the Roomba is able to detect obstacles and navigate properly.
5. Check for debris: Check for any debris that may be blocking the Roomba’s path and remove it.
6. Check the wheels: Make sure that the wheels are free of debris and dirt and that they are able to move freely.
7. Check the battery: Make sure that the battery is charged and that it is not damaged.
8. Update the software: Make sure to update the software regularly to ensure that the Roomba is running the latest version.
9. Check for obstructions: Make sure that there are no obstructions blocking the Roomba’s path.
10. Clean the charging station: Make sure to clean the charging station regularly to ensure that the Roomba is able to charge properly.
How to Reset Your Roomba After Error 14
If your Roomba is displaying an Error 14, it means that the robot is stuck in a loop and needs to be reset. Resetting your Roomba can help it get back to normal operation. Here are the steps to reset your Roomba after Error 14:
1. Disconnect the Roomba from its power source.
2. Remove the dustbin and empty it.
3. Remove the filter and clean it.
4. Remove any debris or obstructions from the Roomba’s brushes, wheels, and sensors.
5. Reconnect the Roomba to its power source.
6. Press and hold the “Clean” button for 10 seconds.
7. Release the “Clean” button and wait for the Roomba to reset.
8. Place the Roomba on a flat surface and press the “Clean” button to start a cleaning cycle.
If the Error 14 persists after resetting your Roomba, contact the manufacturer for further assistance.
What to Do When Roomba Error 14 Occurs
Roomba Error 14 is an error code that indicates a problem with the Roomba’s cliff sensors. When this error occurs, the Roomba will stop and beep nine times.
If you encounter Roomba Error 14, there are a few steps you can take to try and resolve the issue. First, check the cliff sensors for any dirt or debris that may be blocking them. If the sensors are blocked, use a soft cloth to gently clean them.
Next, check the wheels and side brush for any obstructions. If there are any objects blocking the wheels or side brush, remove them.
Finally, check the battery contacts for any dirt or debris. If the contacts are dirty, use a soft cloth to clean them.
If the issue persists after following these steps, contact the manufacturer for further assistance.
Q&A
1. What is Roomba Error 14?
Roomba Error 14 is an error code that indicates a problem with the Roomba’s battery.
2. What are the symptoms of Roomba Error 14?
The Roomba will display the error code on its LCD screen and will not move or respond to commands.
3. What causes Roomba Error 14?
Roomba Error 14 is usually caused by a faulty battery or a battery that is not properly charged.
4. How can I fix Roomba Error 14?
The best way to fix Roomba Error 14 is to replace the battery or to charge the battery fully.
5. Is Roomba Error 14 dangerous?
No, Roomba Error 14 is not dangerous. It is simply an indication that the battery needs to be replaced or charged.
6. What should I do if I get Roomba Error 14?
If you get Roomba Error 14, you should replace the battery or charge the battery fully. If the problem persists, you should contact the manufacturer for further assistance.