- Remove From My Forums
-
Вопрос
-
Добрый день, помогите пожалуйста с проблемой…
Тип события: Ошибка
Источник события: ESE
Категория события: Ведение журнала и восстановление
Код события: 494
Дата: 31.05.2012
Время: 12:35:06
Пользователь: Н/Д
Компьютер: EX2007
Описание:
MSExchangeIS (1868) First Storage Group: При восстановлении базы данных произошла ошибка -1216: обнаружены ссылки на несуществующую базу данных «I:\600\Mailbox-600.edb». Эта база данных перед удалением, перемещением либо переименованием не была переведена
в состояние чистого отключения. СУБД не позволит завершить восстановление для этого экземпляра, пока отсутствующая база данных не будет восстановлена. Если база данных больше не доступна и не нужна, обратитесь к базе знаний Майкрософт или перейдите по ссылке
в нижней части этого сообщения для получения инструкций по исправлению этой ошибки.Для получения дополнительных сведений щелкните следующую ссылку:
http://www.microsoft.com/contentredirect.asp.Предыстория: на старом, старом сервере (exchange 2007) закончилось место на диске, базы повредились, eseutil /p базы восстановили и временно перенесли на usb диск. Затем подняли новый кластер на 2010 и стали переносить пользователей, в один момент сервер
потерял жесткий диск, переподключили, пененесли базы на дисковую полку, сделали опять eseutil /p, но базы так и не подключились, ошибка выше.В данный момент делаем дефрагментацию eseutil /d, но если база не запуститься, что делать следующим этапом?
Ответы
-
всем большое спасибо, очень повезло, база подключилась после исправления ошибок и дефрагментации…
-
Помечено в качестве ответа
19 июня 2012 г. 12:51
-
Помечено в качестве ответа
Know How to Resolve Exchange Error 1216
The worst situation for the Exchange administrator is when Exchange EDB file gets corrupted or damaged. We all know that Exchange stores all its data in EDB format that can only be used via MS Outlook email applications without any issue. However, just like other file extensions, there are the conditions when EDB data files get corrupted and displays errors. One such error is Exchange Error 1216 JET_errAttachedDatabaseMismatch. Users facing this error have to face so many problems. So, in this blog, we are going to discuss the solutions to remove the specified error.
Usually, when the one gets Jet Error then, it is not manageable practically to utilize Exchange database files. However, these instances give out the result in data loss situation. In order, to get back the access of crucial data then, first figure out the main reason behind the issue. Out of which, one such error is:
"Exchange Error -1216 (JET_errAttachedDatabaseMismatch)"
Rapid Solution: SysTools Exchange Server Recovery software is a complete solution that makes easy to recover Exchange mailbox and EDB file from all the corrupted or inaccessible data. The utility retrieves all the data in exact form without losing a bit of data information. This application is capable enough to export the recoverd Exchange mailboxes to Live Exchange Server, Office 365 and PDF, EML, MBOX, PST, MSG, HTML file format.
Cause Behind the Exchange Error 1216 JET_errAttachedDatabaseMismatch
1. Network related issue ad any major corrupted Exchange Database File leads to 1216 Jet error
2. This error is due to assessment of header information in log files. Moreover, databases displays that there has been the removal of files. If soft recovery is run for this error then, it may begin the storage group or it will left the storage group running with various missing of data files.
3. If you execute soft recovery, it may be hard to include lost information into storage group. When the storage group starts, whether the earlier shutdown was unusual, information of header is inspected by machine; if the assessment of system files headers disclosures inconsistencies, 1216 Jet error is returned.
Solution to Remove Exchange Error 1216
If the storage group simply stops all of sudden then, there are the chances that almost all database files become inconsistent. If issue leads to stoppage of storage group then, it leaves more than one database files unreachable. In that case, an error message is logged in event log of application.
One can simply identify the inconsistence of files by using ESEUTIL command against the files.
eseutil /mh database_name | find /i "consistent"
If you are utilizing higher edition of MS Exchange Server then, you can get the state of database file by simply executing the command as discussed below:
eseutil /mh database_name | find /i "Shutdown"
Output You Get After Implementing the command to Fix Exchange Error 1216
All the logs must be present for successful database recover but in case, any logs are missing. Then, you will not be able to do recovery of database. It will be left with no other option than doing the following:
Migrate all database files, which are missing in the last Consistent logs to safe location. After that, restore the residual files by simply mounting them.
Reinstate the database from backup repair database. To execute this, you require executing eseutil /p command, eseutil /d command. After that, isinteg -fixing command.
Summing Up
Getting an error message creates a hurdle in the working flow of any user. Therefore, in the above-discussion, we have discussed the most common error of Exchange and its solution, i.e. Exchange Error 1216 JET_errAttachedDatabaseMismatch. If you still face any issue then, use the professional software mentioned here and feel free to drop a comment below. The problem will further be looked by the experts and provides you with appropriate solution over it.
we get this error intermittently on all of our builds. Starting the same build again it runs OK with no errors. What does it mean, anyone knows?
msbuild arguments (some builds have UpdateDatabase=False and some have UpdateDatabase=True):
/p:GenerateProjectSpecificOutputFolder=true /p:MSBuildMultiProc=false /t:Build /t:Publish /p:SqlPublishProfilePath=Publish\XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.publish.xml /p:UpdateDatabase=False
Thank’s in advance!
Summary
Release | Any CPU
1 error(s), 8 warning(s)
$/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.sln — 1 error(s), 8 warning(s)
h:\XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.publish.sql (0): Internal Error: Ese could not be initialized.
Other Errors
1 error(s)
Exception Message: MSBuild error 1 has ended this build. You can find more specific information about the cause of this error in above messages. (type BuildProcessTerminateException) Exception Stack Trace: at System.Activities.Statements.Throw.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
asked Oct 2, 2014 at 7:08
1
I had the same issue today. Closed all instances of Visual Studio (2012). Also, opened the Windows Task Manager and found that there was still one instance of devenv.exe running and using exceptionally high memory. Closed that one too (End Process Tree). Restarted VS. There was still one project that showed ‘Unavailable’. Right-clicked on that project, and added it. This resolved the issue for me.
answered May 15, 2015 at 15:26
Anoop VermaAnoop Verma
1,50514 silver badges19 bronze badges
1
After some experimenting it seems that adding /m:1 to msbuild gets rid of the problem.
We get no more ESE errors with this setting.
«Specifies the maximum number of concurrent processes to use when building. If you don’t include this switch, the default value is 1.»
For some reason the default value was not enough for us.
I’m posting it here if anyone needs it.
answered Oct 31, 2014 at 9:10
SASSAS
3,9452 gold badges28 silver badges48 bronze badges
For me I think this was caused because I had enabled parallel builds and we have more than one database project some file was locked by one process which caused an error in the other.
The option is Tool -> Options -> Projects and Solutions -> Build and Run -> maximum number of parallel project builds
answered Nov 28, 2019 at 11:17
Ben CollinsBen Collins
4525 silver badges7 bronze badges
1. Перенес терминальный сервер с hiper-V на esxi
2. Переносил клонированием.
3. Получил не работающаю службу Лицензирования удаленных рабочих столов
4. падало как только могло…
Цитата:
Возникла следующая общая ошибка базы данных: «Не удалось инициализировать экземпляр ESE — ошибка -1032 JET_errFileAccessDenied, Cannot access file, the file is locked or in use.
«
Служба «Лицензирование удаленных рабочих столов» завершена из-за внутренней ошибки Присоединенное к системе устройство не работает..
Возникла следующая общая ошибка базы данных: «Не удалось инициализировать экземпляр ESE — ошибка -1023 JET_errInvalidPath, Invalid file path.
svchost (2708) Не удалось определить наименьший размер блока ввода-вывода для тома «C:», содержащего «C:\Windows\system32\LServer», системная ошибка 5 (0x00000005): «Отказано в доступе. «. Эта операция не будет выполнена, ошибка: -1032 (0xfffffbf8).
и сносил роль и ставил заново… нигуя не помогало…
ясно было что проблема в правах на папку , но все права были дадены…
в итоге поставил запуск службы от системной учетной записи и все взлетело…
странно все это,…