Комплексные IT-решения
Печать как совокупность средств и технологий, позволяющих организовать и управлять бумажным и
электронным
документооборотом в компании — это критически значимый компонент IT-инфраструктуры практически любой
организации. От того, насколько профессионально будет спроектирована и внедрена печать в вашей
компании,
зависит эффективность работы персонала, скорость и непрерывность бизнес-процессов, информационная
безопасность.
Современная корпоративная печать — это не только оборудование и специализированные
программно-аппаратные решения, но и целый комплекс мер, направленных на разработку, интеграцию,
материально-техническое обеспечение, мониторинг, рациональное управление инфраструктурой и процессами
печати
в компании. Мы можем подготовить и реализовать пакет технологических решений под любые задачи печати.
Серверное и сетевое оборудование, рабочие станции, телефония, и, конечно же, печатная техника — все это
ключевые и подчас весьма дорогостоящие компоненты любой IT-инфраструктуры. Чтобы безошибочно выбрать
подходящее оборудование, ввести его в эксплуатацию, настроить все процессы и квалифицированно управлять
ими, нужны серьезные финансовые ресурсы и штат профильных специалистов. Но что делать, если собственная
IT-инфраструктура и персонал не по карману? Делегируйте эти задачи профессионалам, а оборудование
арендуйте.
Аутсорсинг печати
С 2004 года оказываем услуги по организации, управлению, материально-техническому сопровождению
корпоративных процессов печати. Реализуем проекты любой сложности по всей России.
Подробнее
Аудит печати
Проводим экспертную оценку состояния печатной инфраструктуры заказчика, предлагаем
персонализированные
решения профессионального уровня.
Подробнее
Ремонт принтеров и МФУ
C 1992 года специализируемся на техническом обслуживании и ремонте печатного оборудования всех типов,
марок
и моделей, представленных на российском рынке.
Подробнее
Интеграция ПО
Специализированные программные продукты от ведущих мировых и российских разработчиков:
- системы мониторинга, управления и контроля печати: MyQ, PaperCut MF, OptimiDoc, Princity, Printum;
- системы оптического распознавания и маршрутизации документов: Umango, ABBYY, DocSlide;
- решения для защиты корпоративной интеллектуальной собственности: StarForce Content Enterprise;
- обучение работе с системами управления печатью.
Программные продукты
IT-аутсорсинг
Наша компания готова стать единым центром ответственности за слаженную и бесперебойную работу вашей
IT-инфраструктуры, и предоставить вам все необходимое для того, чтобы вы смогли эффективно решать свои
бизнес-задачи.
Подробнее
Виртуальная АТС
Виртуальная АТС — это удобная и полноценная альтернатива традиционным офисным АТС,
позволяющая организовать собственную корпоративную IP-телефонию на базе программно-аппаратных ресурсов
провайдера.
Подробнее
Специальные предложения
Лучшие цены на оргтехнику для дома и офиса!
Подробнее
Техника с пробегом
Оборудование в хорошем состоянии по супер-цене!
Подробнее
Больше видео
на нашем канале!
Dislikes: 0
-
04-06-2011
#1
error code 0094 on a Konica Minolta C35
I have a error code 0094 on a Develop ineo+ 35 (Konica Minolta C35), machine is dead asking to ring service quoting trouble code 0094.
Please advise — Thanks
There are three types of people in this world: those who make things happen, those who watch things happen and those who wonder what happened.
-
04-06-2011
#2
Senior Tech
100+ Posts
- Rep Power
- 33
That code has to do with the 2nd transfer pressure/retraction or the idc shutters are not opening/closing
-
04-06-2011
#3
Thanks for that, I will let my engineer know of this.
There are three types of people in this world: those who make things happen, those who watch things happen and those who wonder what happened.
-
04-06-2011
#4
Hi there!
Remove the the transferbelt-unit and rotate the band manualy (check if it�s going easy) & rebuilt the unit. Also look that there is the newest firmware on the machine (attention: it exist G10 & G00 Versions!).
Greetings…
-
01-23-2012
#5
Re: error code 0094 on a Konica Minolta C35
Make sure the second transfer release solenoid isn’t hanging up due to the pad that’s there to minimize noise. See the attached pic. This pad had gotten sticky enough that it was delaying the action of the solenoid. Took a lot of service calls to figure this out!
-
09-03-2012
#6
Junior Member
- Rep Power
- 0
Re: error code 0094 on a Konica Minolta C35
Hello ,
can you help me where is this pad located in the machine exactly?
Thanks
-
09-03-2012
#7
Re: error code 0094 on a Konica Minolta C35
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals, The Internet’s largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
-
06-22-2014
#8
Senior Tech
250+ Posts
- Rep Power
- 32
Re: error code 0094 on a Konica Minolta C35
Originally Posted by Mr. Joshua
Make sure the second transfer release solenoid isn’t hanging up due to the pad that’s there to minimize noise. See the attached pic. This pad had gotten sticky enough that it was delaying the action of the solenoid. Took a lot of service calls to figure this out!
Hi
Thanks for the post. I am dealing with the same issue and so far replaced the ITB, checked the solenoid (there was no pad I could see), inspected the ITB guide and ordered the updated one. Noticed that the new ITB was very noisy so I put the old one back….
Has anybody else dealt with this code please or has any other ideas please.Thanks in advance!
-
06-22-2014
#9
Field Supervisor
500+ Posts
- Rep Power
- 43
Re: error code 0094 on a Konica Minolta C35
Remove the ITB and then remove the 4 springs that are visible holding the Magenta and Yellow 1st transfer rollers in tension. Refit the belt..if code stays away you are supposed to remove the belt and refit the springs after stretching them a little to reduce their tension but not so much that they fall off!!
The springs are too tight so that the drives cannot operate the shift assembly, hence the noise and then the code! Sorry …Just realised that I have missread the error code!! Please ignore my post..talking about 0096 code.
Last edited by minimerlin; 06-22-2014 at 09:28 PM.
-
06-22-2014
#10
Re: error code 0094 on a Konica Minolta C35
Here are a few possibilities:
«0094», «0310» error. 2ndary transfer drive failure (0094), and laser shutter malfunction (0310). Enduser has removed the fuser, then only latched the fuser at the front. The rear prevents the right door from closing completely. Re-install fuser and latch correctly. Close right door.
«C0094» error. Transfer rollers popped out of place. Rotate the pressure gear. Shadow @Copytechnet
«C0094» error. Flimsey clutch in the transfer unit on the door won’t rotate and open the shutter over the IDC sensors. Replace door. Speedy @Copytechnet
«C0094» error. TAD [TABT1200333EN00]. Secondary transfer problem. See Bulletin. minimerlin @Copytechnet
=^..^=
If you’d like a serious answer to your request:
1) demonstrate that you’ve read the manual
2) demonstrate that you made some attempt to fix it.
3) if you’re going to ask about jams include the jam code.
4) if you’re going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Re: error code 0094 on a Konica Minolta C35
Originally Posted by Mr. Joshua
Tags for this Thread
Bookmarks
Bookmarks
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
- BB code is On
- Smilies are On
- [IMG] code is On
- [VIDEO] code is On
- HTML code is Off
Forum Rules
Konica Minolta Printer Error Code List With Solutions:
Error codes truly reflect a different reason for each kind of printer malfunction which applies in the case of your Konica Minolta printer as well. Your Konica Minolta printer’s troubleshooting is defined by means of several Konica Minolta Printer Error Codes which warrant a detailed discussion of the same.
So, next time you see a Konica Minolta Printer Error Code just draw reference from this unique guide that will make you aware about fixing such a Konica Minolta Printer Error Code promptly.
1 — The Konica Minolta Printer Error Code 0094 Speaks about the Connecting Links
While attempting to fix the Konica Minolta Printer Error Code, it becomes paramount that all the connecting links are checked starting from the M2-PRCB PJ6 connector and then moving ahead by including the M2 and the IDC-PRCB PJ24 connectors in the check-up routine.
2 — The Konica Minolta Printer Error Code 107 Tells about the Closed SMB Port
Here the main objective is to provide permission to the TCP 445 port in your computer’s firewall which will open up the port thus enabling File and Printer sharing in Windows Settings Segment.
What you also have to set correctly is actually the “Shared Folder” arrangement by scrutinizing its access rights in your given case which will help you fix this Konica Minolta Printer Error Code.
3 — The Konica Minolta Printer Error Code 535 Arises while Scanning and Emailing a Document
To fix this specific error you must ascertain whether there has been a change in your email that is linked with your Konica Minolta printer and if it is so then you must make sure that such new email is paired up with the Konica Minolta Printer.
4 — The Konica Minolta Printer Error Code 57 Emanating due to the Printer’s Failure in Collaborative Editing
To fix this you have to enable the SMBv1 feature by typing in the following command in the Command Prompt window.
«sc.exe config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi sc.exe config mrxsmb10 start=auto»
5 — The Konica Minolta Printer Error Code C0202 Caused due to the Jammed Paper
The solution for the Konica Minolta Printer Error Code C0202 is simple as it prescribes doing the following things in succession.
Step 1 — Just pull off the Power Plug followed by emptying the paper tray.
Step 2 — Also, cause to take out any jammed paper stuck between the rollers.
Step 3 — Finally place all the components in their exact locations and slots.
6 — The Konica Minolta Printer Error Code C0500 due to the Heating Element’s Abnormality
Step 1 — As far as you want to fix the Konica Minolta Error Code C0500 you must first turn off your printer followed by pulling away the plug from the power socket.
Step 2 — You must check whether the Heater Lamp fuse gets “ON” along with the Power Switch. If it doesn’t then you must replace the Heater Lamp Fuse using the technical manuals and guides.
Step 3 — If the Konica Minolta Printer Error Code C0500 is still flashing then you must consult a technician as the other components like Roller Thermostat or the Interlock Switches may be the culprit this time.
7 — The Konica Minolta Printer Error Code C2152 Flashes Due to the Transfer Belt Retraction Dysfunction
Step 1 — Remove the transfer belt from its casing without bumping the sensor plates.
Step 2 — Using cotton pads soaked in alcohol clean the ink stains including the sensor plates.
Step 3 — Reinstall all the components in their respective sockets and housing.
Step 4 — Now switch off the printer and wait for 20 seconds at least followed by pressing the Utility Button while still holding the Power Switch which will eventually reset the troubleshooting procedure.