Все время на других сайтах ищу коды ошибок, решил не искать, а просто опубликовать коды ошибок у себя на сайте, сразу скажу честно, содрал на другом сайте 🙂
|
||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||
 Запчасти для ТОне требуются |
||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||
| Основные коды ошибок |
||||||||||||||||||||||||||||||||
|
В заметке использованы материалы с riconik.info
Clear the SC545 error code in Ricoh MP C4503, MP C5503, MP C6003.
Here in this post I explain how to fix error SC545 code in Ricoh Aficio mpc4503 copier, which should solve your problem. This introduction will help you to troubleshoot some common error code SC542-02, SC542-03, SC544-01, SC544-02, SC545 and SC549-04 messages in Ricoh Aficio MP C4503, series. We are sharing a few methods to fix the error, so check them one by one until it gets solved.
 |
| how do I clear SC545 error for Ricoh MP C4503/MP C5503/MP C6003 |
Here in this post, I explain how to fix the error SC545 code in Ricoh Aficio mpc3503, mpc4503 copier, which should solve your problem. This introduction will help you to troubleshoot some common error code SC542-02, SC542-03, SC544-01, SC544-02, SC545 and SC549-04 messages in Ricoh Aficio MP C3003, MP C3503, MP C4503, MP C5503, and MP C6003 series. We are sharing a few methods to fix the error, so check them one by one until it gets solved.
The maintenance sign means that the copier needs to be well serviced and checked if something is to be replaced. Consumables such as Toner, Drum, Blade, Fuser rollers, Pickup roller, and Developer are changed at such times. And also check the changing consumables are original or not. Always use spares having good quality. If you are sure that you have replaced the correct part or nothing is to be replaced, after ensuring these things, you can proceed to clear the sign. Always call experienced technicians for service.
Mining of the error code SC545.
The SC545 is displayed when your machine fails to reach the correct temperature at a specific time. The heating roller thermistor detects 240°C or more. The copier is toast until you manually clear the error from the keypad. Even though the printer is physically fine, it won’t come ready until the prior error condition is cleared. If the first time occurs, you need to go into service and clear the error then reset. Easy to reset and fault usually goes away.
Clear the SC545 error code:
The Fix To clear error SC545, you must perform the procedure.
- Press the “8, 0, 6, 1, 8, 2” on your keyboard or touchscreen.
- Then press and hold down the “C” button for more than 5 sec.
- Tech the “System sp” on the touch panel.
- Then press the “5810” and “#” button.
- Then tech the “EXECUTE”.6. Turn OFF the power main switches, and turns it ON. The error code is now cleared.
Even if the above fixes are shown in error code. Then check these all things.
Some possible causes.
- Check the thermistor.
- Check the fusing lamp.
- Replace the fusing unit.
- Replace the AC power supply board.
- Replace the BCU or the Fusing central NC sensor.
After you replace the part, then you have to reset the machine in the service mode system sp.
I hope this was helpful, don’t forget to share it via any of the share buttons on this page are highly welcomed as well.
Ricoh printers have long been renowned for their exceptional quality within the computer industry. However, even with such superior printers, occasional faults may arise.
One such error code is SC 544-00, which typically indicates an issue with the fuser, particularly when it becomes overheated. This error, classified as part of the 5 series of errors, often leads to problems with paper feeding.
If you’re seeking an effective solution for resolving the Ricoh printer error SC 544-00 and restoring your printer’s functionality and convenience, you’ve come to the right place. In this article, we provide a complete guide to fix this error.
Step-by-Step Guide to Fix Error SC 544-00
Rectifying this issue and bringing your printer back to its operational state involves just two simple steps. Follow the instructions below, and you’ll likely be able to resolve the Ricoh Printer Error SC 544-00:
Step 1: Resetting the fuser
If the error is due to a power-related problem, this step will help eliminate the error promptly. To reset the fuser, locate the home and screen buttons on your printer and press them simultaneously for approximately 6 seconds.
This action will open the printer into service mode, allowing you to perform the necessary operations. Next, select User tools and choose your specific printer model from the options provided. Then, select the fuser reset error and allow your printer to reboot and restart.
Step 2: Restoring factory settings
Now that you’ve reset the fuser settings, it’s time to reset the printer back to its factory defaults.
This process will restore the Ricoh printer to its original state while preserving any previous customizations you made. Begin by turning the printer on and waiting for about 4 minutes for it to fully initialize.
Then, disconnect the power cord from the printer and unplug it from the switchboard. Wait for approximately 2 minutes before reconnecting the power cable to both the printer and the switchboard.
Finally, power on the printer and check if the error has disappeared, allowing you to print your documents effortlessly.
By following the above steps, you can effectively resolve the Ricoh printer error SC 544-00 and restore your printer to its operational state.
However, if the issue persists and your printer still fails to print, it is advisable to seek the assistance of a qualified printer technician.
A professional technician can not only help you fix your Ricoh printer but also provide valuable guidance for any future printer-related issues that may arise.
SC544 — ошибка термистора. Чтобы до него добраться открываем переднюю крышку, откручиваем 1 болт.
Отсоединяем красный разъем.
Открываем правую крышку, отсоединяем правый нижний разъем, который идет на печку. Откручиваем 2 болта и достаем печку.
Вот мы и добрались до термистора, который крепится одним болтом.
Меняем его, ставим печку на место.
Осталось сбросить ошибку. Для этого входим в сервисный режим: нажимаем «Clear Modes» — 107 — «Clear/Stop» (необходимо удерживать 3-5 сек). Потом нажимаем: 1 — 5 — # — 810 — # — 1, нажать и удерживать «Original» (текст или фото) и неотпуская ее нажать «Start». Аппарат готов к работе.
Частенько возникает ситуации когда на принтере Ricoh SP150 загорается или начинает мигать красный индикатор. Такое поведение сигнализирует об аппаратной ошибке девайса. Код ошибки можно поглядеть в утилите принтера. (Сбрасываемые коды: sc541, sc542, sc543, sc544, sc545, sc559) Выглядит это примерно так:
Аппаратная ошибка вполне может оказаться разовой, поэтому прежде чем тащить принтер в сервисный центр, можно попробовать сбросить ошибку через системную утилиту.
1. Качаем утилиту набор набор утилит CE Tools отсюда.
2. Если есть другие принтеры кроме принтера с ошибкой, отключаем их.
3. Запускаем. Выбираем меню Output Check -> Выбираем позицию FusingSCReset -> Нажимаем ON. Закрываем программу.
4. Перезапускаем аппарат.
Если ошибка была разовой, после сброса принтер должен работать нормально. Частое повторение такого рода ошибок говорит об аппаратной неисправности принтера и вам придется нести его в сервис или на свалку.
Скачайте сервисную утилиту.
Она сбрасывает ошибки: 541, 542, 543, 544, 545, 559.
Для начала нужно извлечь печку и убедиться в отсутствии посторонних предметов, отсутствии повреждения тефлонового и прижимного вала. После диагностики и ремонта печки, можно приступить к сбросу ошибки.
Для сброса ошибки:
1. Подключите принтер.
2. Запустите CE Tools, аппарат включится.
3. Выберите меню Output Check.
4. Выберите FusingSCReset.
5. Нажмите ON.
Печка по конструкции весьма надежна, но тефлоновый вал к сожалению сидит на бушингах, а не на подшипниках качения как в Ricoh SP325.