-
#1
im having issues with my gpu there was atrifacts on screen so i hopped into device mangaer i right click > properties then it says windows has stopped this device because it reported errors (code 43) so i go to details then sort by pcie error reoprting and it just says 0000007 and when i try install drivers nothing happens perhaps maybe a corupt windows install media that i have ?
specs
mobo gigabye aurous b550 elite ax v2
cpu r7 3770x
ram 2x8gb corsair vengance lpx 3200mhs (i think )
gpu asus rog strix 1050ti oc 4gb
also the pci uncorectablle error severity code is 00462030
-
#2
Artifacts usually mean there is something wrong with the hardware. Could be overheating GPU, bad contact with PCIE, or GPU memory is diying. I haven’t ever seen any software or BIOS related issues with artifacts, but i guess thats a possibility still.
Have you checked GPU temperatures? You can do that with GPU-Z or HWinfo for example, and you should be able to see both core temp. and memory temp. (if i remember correct with 1050ti).
Did this problem occur when you had changes to your hardware, like changed cpu, mobo or something, or did it start all the sudden?
-
#3
Artifacts usually mean there is something wrong with the hardware. Could be overheating GPU, bad contact with PCIE, or GPU memory is diying. I haven’t ever seen any software or BIOS related issues with artifacts, but i guess thats a possibility still.
Have you checked GPU temperatures? You can do that with GPU-Z or HWinfo for example, and you should be able to see both core temp. and memory temp. (if i remember correct with 1050ti).
Did this problem occur when you had changes to your hardware, like changed cpu, mobo or something, or did it start all the sudden?
temps are fine 37 degrees celcius
-
#4
temps are fine 37 degrees celcius
it all started when i reset my windows and put my nvme drive in to my pc
so perhaps a corupt windows insall or my installation media is corrupt perhaps?
-
#5
it all started when i reset my windows and put my nvme drive in to my pc
so perhaps a corupt windows insall or my installation media is corrupt perhaps?
Yeah i guess it could be software/driver issue with Windows. BUT, if it started when you installed NVME, maybe you accidently hit GPU or something? I’d take GPU OFF from PCIE-slot and reseat it. Some PCIE-slots are pretty loose and a small movement to GPU can cause issues. And make sure that 6pin power cable connection to GPU is tight enough (usually clicks). I know this sounds a bit far fetched, but from my experience artifacts and PCIE-errors are often caused by something like this, not software or drivers. But thats still a possibility i guess, so if GPU is correctly seated, Windows reinstall is one option.
-
#6
Yeah i guess it could be software/driver issue with Windows. BUT, if it started when you installed NVME, maybe you accidently hit GPU or something? I’d take GPU OFF from PCIE-slot and reseat it. Some PCIE-slots are pretty loose and a small movement to GPU can cause issues. And make sure that 6pin power cable connection to GPU is tight enough (usually clicks). I know this sounds a bit far fetched, but from my experience artifacts and PCIE-errors are often caused by something like this, not software or drivers. But thats still a possibility i guess, so if GPU is correctly seated, Windows reinstall is one option.
i bougght a new motherboard yesterday and it came earlier today so i rebuilt my pc so it cant be that
-
#7
i bougght a new motherboard yesterday and it came earlier today so i rebuilt my pc so it cant be that
Okay, and did the problem start when you installed your motherboard or M.2 drive? You should check your GPU connections. Reseat the GPU to PCIE slot and make sure it clicks, and make sure you have 6pin power cable to GPU (its an OC 1050ti that requires 6pin cable). If those are fine, it could be BIOS issue with motherboard aswell. Check Gigabyte’s site if there is newer version to your BIOS, BUT updating bios can go terribly wrong in worst case screnarios, so make sure you follow every step carefully.
-
#8
Okay, and did the problem start when you installed your motherboard or M.2 drive? You should check your GPU connections. Reseat the GPU to PCIE slot and make sure it clicks, and make sure you have 6pin power cable to GPU (its an OC 1050ti that requires 6pin cable). If those are fine, it could be BIOS issue with motherboard aswell. Check Gigabyte’s site if there is newer version to your BIOS, BUT updating bios can go terribly wrong in worst case screnarios, so make sure you follow every step carefully.
Ot started after I got my nvme drive and installed windows and formatted my c drive I’m fairly certain it’s the gpu it’s self or just a corrupt windows install
-
#9
Ot started after I got my nvme drive and installed windows and formatted my c drive I’m fairly certain it’s the gpu it’s self or just a corrupt windows install
Corrupted Windows should not cause Artifacts and even PCIE-errors are usually not software or windows problems, your problem sounds more like a hardware problem. Read my message and try those tips i gave you, otherwise im done helping man.
-
#10
Corrupted Windows should not cause Artifacts and even PCIE-errors are usually not software or windows problems, your problem sounds more like a hardware problem. Read my message and try those tips i gave you, otherwise im done helping man.
Everything is seated correctly the gpu power light is on if the power wasnt plugged it it would be red
The gpu displays a picture but the cpu dose the work and I dont have a igpu so the card is barely working
-
#11
Everything is seated correctly the gpu power light is on if the power wasnt plugged it it would be red
The gpu displays a picture but the cpu dose the work and I dont have a igpu so the card is barely working
Okay good. And is the GPU seated on the upper PCIE-E lane on the mobo? Mobo manual: » For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. » And that slot is the one on the up and its white unlike the down ones wich are black.
If Windows reinstall is easy job for you (no files to backup etc.) you could try that, but im pretty sure that it won’t solve the problem. Have you tried to reinstall Nvidia drivers?
-
#12
Okay good. And is the GPU seated on the upper PCIE-E lane on the mobo? Mobo manual: » For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. » And that slot is the one on the up and its white unlike the down ones wich are black.
If Windows reinstall is easy job for you (no files to backup etc.) you could try that, but im pretty sure that it won’t solve the problem. Have you tried to reinstall Nvidia drivers?
I have yes used ddu
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
- Topics
-
#1
im having issues with my gpu there was atrifacts on screen so i hopped into device mangaer i right click > properties then it says windows has stopped this device because it reported errors (code 43) so i go to details then sort by pcie error reoprting and it just says 0000007 and when i try install drivers nothing happens perhaps maybe a corupt windows install media that i have ?
specs
mobo gigabye aurous b550 elite ax v2
cpu r7 3770x
ram 2x8gb corsair vengance lpx 3200mhs (i think )
gpu asus rog strix 1050ti oc 4gb
also the pci uncorectablle error severity code is 00462030
-
#2
Artifacts usually mean there is something wrong with the hardware. Could be overheating GPU, bad contact with PCIE, or GPU memory is diying. I haven’t ever seen any software or BIOS related issues with artifacts, but i guess thats a possibility still.
Have you checked GPU temperatures? You can do that with GPU-Z or HWinfo for example, and you should be able to see both core temp. and memory temp. (if i remember correct with 1050ti).
Did this problem occur when you had changes to your hardware, like changed cpu, mobo or something, or did it start all the sudden?
-
#3
Artifacts usually mean there is something wrong with the hardware. Could be overheating GPU, bad contact with PCIE, or GPU memory is diying. I haven’t ever seen any software or BIOS related issues with artifacts, but i guess thats a possibility still.
Have you checked GPU temperatures? You can do that with GPU-Z or HWinfo for example, and you should be able to see both core temp. and memory temp. (if i remember correct with 1050ti).
Did this problem occur when you had changes to your hardware, like changed cpu, mobo or something, or did it start all the sudden?
temps are fine 37 degrees celcius
-
#4
temps are fine 37 degrees celcius
it all started when i reset my windows and put my nvme drive in to my pc
so perhaps a corupt windows insall or my installation media is corrupt perhaps?
-
#5
it all started when i reset my windows and put my nvme drive in to my pc
so perhaps a corupt windows insall or my installation media is corrupt perhaps?
Yeah i guess it could be software/driver issue with Windows. BUT, if it started when you installed NVME, maybe you accidently hit GPU or something? I’d take GPU OFF from PCIE-slot and reseat it. Some PCIE-slots are pretty loose and a small movement to GPU can cause issues. And make sure that 6pin power cable connection to GPU is tight enough (usually clicks). I know this sounds a bit far fetched, but from my experience artifacts and PCIE-errors are often caused by something like this, not software or drivers. But thats still a possibility i guess, so if GPU is correctly seated, Windows reinstall is one option.
-
#6
Yeah i guess it could be software/driver issue with Windows. BUT, if it started when you installed NVME, maybe you accidently hit GPU or something? I’d take GPU OFF from PCIE-slot and reseat it. Some PCIE-slots are pretty loose and a small movement to GPU can cause issues. And make sure that 6pin power cable connection to GPU is tight enough (usually clicks). I know this sounds a bit far fetched, but from my experience artifacts and PCIE-errors are often caused by something like this, not software or drivers. But thats still a possibility i guess, so if GPU is correctly seated, Windows reinstall is one option.
i bougght a new motherboard yesterday and it came earlier today so i rebuilt my pc so it cant be that
-
#7
i bougght a new motherboard yesterday and it came earlier today so i rebuilt my pc so it cant be that
Okay, and did the problem start when you installed your motherboard or M.2 drive? You should check your GPU connections. Reseat the GPU to PCIE slot and make sure it clicks, and make sure you have 6pin power cable to GPU (its an OC 1050ti that requires 6pin cable). If those are fine, it could be BIOS issue with motherboard aswell. Check Gigabyte’s site if there is newer version to your BIOS, BUT updating bios can go terribly wrong in worst case screnarios, so make sure you follow every step carefully.
-
#8
Okay, and did the problem start when you installed your motherboard or M.2 drive? You should check your GPU connections. Reseat the GPU to PCIE slot and make sure it clicks, and make sure you have 6pin power cable to GPU (its an OC 1050ti that requires 6pin cable). If those are fine, it could be BIOS issue with motherboard aswell. Check Gigabyte’s site if there is newer version to your BIOS, BUT updating bios can go terribly wrong in worst case screnarios, so make sure you follow every step carefully.
Ot started after I got my nvme drive and installed windows and formatted my c drive I’m fairly certain it’s the gpu it’s self or just a corrupt windows install
-
#9
Ot started after I got my nvme drive and installed windows and formatted my c drive I’m fairly certain it’s the gpu it’s self or just a corrupt windows install
Corrupted Windows should not cause Artifacts and even PCIE-errors are usually not software or windows problems, your problem sounds more like a hardware problem. Read my message and try those tips i gave you, otherwise im done helping man.
-
#10
Corrupted Windows should not cause Artifacts and even PCIE-errors are usually not software or windows problems, your problem sounds more like a hardware problem. Read my message and try those tips i gave you, otherwise im done helping man.
Everything is seated correctly the gpu power light is on if the power wasnt plugged it it would be red
The gpu displays a picture but the cpu dose the work and I dont have a igpu so the card is barely working
-
#11
Everything is seated correctly the gpu power light is on if the power wasnt plugged it it would be red
The gpu displays a picture but the cpu dose the work and I dont have a igpu so the card is barely working
Okay good. And is the GPU seated on the upper PCIE-E lane on the mobo? Mobo manual: » For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. » And that slot is the one on the up and its white unlike the down ones wich are black.
If Windows reinstall is easy job for you (no files to backup etc.) you could try that, but im pretty sure that it won’t solve the problem. Have you tried to reinstall Nvidia drivers?
-
#12
Okay good. And is the GPU seated on the upper PCIE-E lane on the mobo? Mobo manual: » For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. » And that slot is the one on the up and its white unlike the down ones wich are black.
If Windows reinstall is easy job for you (no files to backup etc.) you could try that, but im pretty sure that it won’t solve the problem. Have you tried to reinstall Nvidia drivers?
I have yes used ddu
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
- Topics
- Remove From My Forums
-
Вопрос
-
Доброго дня, комрады!
Проблема с логами, столкнулся сразу после покупки.
Конфигурация ноута:
i5-6300HQ — 8GB DDR4 — GTX 950m — SSD M.2 120 — SSD SATA III 120 — HDD Toshiba 1 TB (вместо DVD)
Установлена Win 10 Home — лицензия была с ноутом.
Текст лога
WHEA-Logger
Устранимая аппаратная ошибка.
Компонент: Порт PCI Express Root
Источник ошибки: Расширенный отчет об ошибках (PCI Express)Шина:Устройство:Функция: 0x0:0x1C:0x4
ИД поставщика:ИД устройства: 0x8086:0xA114
Код класса: 0x30400Дополнительные сведения содержатся в подробностях этой записи.
[ Name] Microsoft-Windows-WHEA-Logger [ Guid] {C26C4F3C-3F66-4E99-8F8A-39405CFED220} Keywords 0x8000000000000000 [ SystemTime] 2018-01-05T10:17:39.365108500Z [ ActivityID] {29C1F179-D699-475A-8E92-E8BEA2246D6C} [ ProcessID] 3412 [ ThreadID] 9304 FRUId {00000000-0000-0000-0000-000000000000} UncorrectableErrorStatus 0x0 CorrectableErrorStatus 0x1000 HeaderLog 00000000000000000000000000000000 RawData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Не смог найти по продукт и вендор ID, что это за устройство, предполагаю где-то чипсет, но не могу понять.
Что было сделано.
Обновлены все драйвера сперва с официального сайта Asus, все установлено без ошибок. Не помогло
Далее были скачаны все официальные последние драйвера с сайтов производителей.
Видеокарту с GeForce, Чипсет HM170 с сайта Intel и остальное так же. Так же без ошибок, все обновилось.
Но проблема не решена.
Насколько обращать внимание на это? Стоит ли парится и искать решение или из текста Logger, значит что то пытается слогировать но не получается, может и черт с ним, пускай не логирует?
Если надо решить, не прошу мне решить проблему вам, просто направьте в нужно русло!
Заранее спасибо!
Ответы
-
Здравствуйте!
Решал такую же проблему и в итоге вышел на то, что 112, 113 и 114 — это ID не устройста, а их Parent’ов.
Если открыть Device Manager и выбрать View->Devices by connection, то можно найти
ACPI x64-based PS -> Microsoft ACPI-Compilant System -> PCI Express Root Complex
А дальше уже знокомые цифры:
— Intel(R) 100 Series/C230 Series Chipset Family PCI Express Root Port #3 — A112
— Intel(R) 100 Series/C230 Series Chipset Family PCI Express Root Port #4 — A113
— Intel(R) 100 Series/C230 Series Chipset Family PCI Express Root Port #5 — A114К ним соответсвенно прицеплены:
— Wifi
— CardReader + Ethernet
— USB3.1 eXtensible Host ControllerТ.е. проблема в USB3.1 контроллере. Но такую же проблему я встречал и на других ноутбуках и других моделях. У кого-то из лока иногода не выходит, у кого-то подключенный жесткий диск постоянно перезапускается …
Но это не похоже на брак. А скорее всего проблема с драйверами к нему.
-
Изменено
29 июня 2018 г. 14:35
-
Предложено в качестве ответа
Vector BCOModerator
29 июня 2018 г. 14:43 -
Помечено в качестве ответа
Anton Sashev IvanovOwner
10 декабря 2018 г. 10:11
-
Изменено
|
0 / 0 / 1 Регистрация: 28.07.2021 Сообщений: 103 |
|
|
1 |
|
|
25.12.2021, 11:14. Показов 4817. Ответов 8
Доброго дня! ОС — Windows 7 (x64) Подскажите, в Просмотре событий сыпят постоянные Предупреждения:
Компонент: Порт PCI Express Root Шина:Устройство:Функция: 0x0:0x0:0x0 Дополнительные сведения содержатся в подробностях этой записи. Кликните здесь для просмотра всего текста — System — Provider [ Name] Microsoft-Windows-WHEA-Logger EventID 17 Version 0 Level 3 Task 0 Opcode 0 Keywords 0x8000000000000000 — TimeCreated [ SystemTime] 2021-12-25T08:09:56.968750000Z EventRecordID 4667799 — Correlation [ ActivityID] {2481DA6C-5ADE-48DB-B5F9-DB558791E257} — Execution [ ProcessID] 1344 Channel System Computer User-ПК — Security [ UserID] S-1-5-19 — EventData ErrorSource 4
__________________ 0 |
|
Programming Эксперт 94731 / 64177 / 26122 Регистрация: 12.04.2006 Сообщений: 116,782 |
25.12.2021, 11:14 |
|
8 |
|
0 / 0 / 1 Регистрация: 28.07.2021 Сообщений: 103 |
|
|
25.12.2021, 11:24 [ТС] |
2 |
|
Почему вообще полез в журнал? Знакомый попросил посмотреть, почему у него стал перегружаться комп во время запуска игр. Удаленно обновил дрова на видео, удалил антивирус — не помогло. Он привез системник ко мне, я его тестирую уже часа 3 под нагрузками и комп не перегружается — игры запускаются, 4к видео показывает, тесты всяки епрогоняются… Я вот думаю, может проблема была в БП? И когда системник обесточили, то заряд в БП сбросился и сейчас работает без перегрузок. Но надолго ли? 0 |
|
1139 / 618 / 63 Регистрация: 04.02.2020 Сообщений: 3,682 Записей в блоге: 6 |
|
|
25.12.2021, 12:00 |
3 |
|
Системная плата — Koloe X58
Для линии -12В — это норм показатели в -15? О_о Тут что угодно может быть норма у китайских братьев, мультиметром проверяйте. 1 |
|
0 / 0 / 1 Регистрация: 28.07.2021 Сообщений: 103 |
|
|
25.12.2021, 12:11 [ТС] |
4 |
|
Полный конфиг укажите.
Начитался я про это Событие 17 WHEA-Logger. В основном рекомендуют переставить драйверы с оф.сайта, но большинству это не помогает. Плюс, в данном случае китайская плата, на которую найти нормальные дрова это тот еще квест. Еще рекомендуют прошивать БИОС или Винду переустанавливать. С БИОСом еще может быть, но переустановка Винды вряд ли поможет 0 |
|
1139 / 618 / 63 Регистрация: 04.02.2020 Сообщений: 3,682 Записей в блоге: 6 |
|
|
25.12.2021, 12:52 |
5 |
|
Полный конфиг укажите. Что за блок питания.
мультиметром проверяйте. 0 |
|
0 / 0 / 1 Регистрация: 28.07.2021 Сообщений: 103 |
|
|
25.12.2021, 14:01 [ТС] |
6 |
|
Что за блок питания. Chieftec GPA-700S
мультиметром проверяйте. нет у меня его 0 |
|
1139 / 618 / 63 Регистрация: 04.02.2020 Сообщений: 3,682 Записей в блоге: 6 |
|
|
25.12.2021, 14:04 |
7 |
|
цена вопроса 200-400 рублей, иначе дальше нету смысла продолжать. 0 |
|
0 / 0 / 1 Регистрация: 28.07.2021 Сообщений: 103 |
|
|
25.12.2021, 14:10 [ТС] |
8 |
|
цена вопроса 200-400 рублей да я им все-равно пользоваться не умею) 0 |
|
1139 / 618 / 63 Регистрация: 04.02.2020 Сообщений: 3,682 Записей в блоге: 6 |
|
|
25.12.2021, 14:22 |
9 |
|
да я им все-равно пользоваться не умею)
… 0 |
- Sep 7, 2017
- 133
- 2
- 1,595
- 1
-
#1
I get errors after I install my drivers since I bought my GPU. It is an RX 460 Saphhire GPU. After I install any driver no matter old or new ,device manager shows me error 0x15 for my GPU. I tried re-installing windows so do not recommend that. I used DDU but it did not help. Here is all the information you need-
View: https://imgur.com/a/YMbhk2Z
PCI error reporting- 00000007
PCI uncorrectable error severity- 00462030
Probably due to this error I am getting severe issues in games like when I play some game which is heavy on my GPU I start getting a black patch that covers some part of my screen and then disappears. Also the built in console of games start reporting errors and warnings. My GPU utilisation too drops severely due to which I get low frames. All my drivers and BIOS are up to date.
EDIT: If you know of any security settings I am supposed to turn off while installing drivers then please tell. I turned off Avast, windows defender and DEP(Data execution prevention). Also I noticed that I get the message-«Radeon settings have restored every time I restart PC»
Last edited: Apr 21, 2019
- Nov 7, 2011
- 69,588
- 3,198
- 162,240
- 6,865
-
#2
full system spec? include make and model of the psu
- Sep 7, 2017
- 133
- 2
- 1,595
- 1
-
#3
full system spec? include make and model of the psu
My specs-
CPU — Ryzen 3 1200
MOTHERBOARD-AB350M GAMING 3
PSU- CORSAIR VS 450
RAM-16GB DDR4
HDD- WD10EZEX
You need any log file please tell but I want to solve this problem.
- Apr 13, 2019
- 2,560
- 199
- 5,740
- 404
- Sep 7, 2017
- 133
- 2
- 1,595
- 1
-
#5
Yes the problem is common to each and every driver which I try to install for this GPU.
- Apr 13, 2019
- 2,560
- 199
- 5,740
- 404
- Sep 7, 2017
- 133
- 2
- 1,595
- 1
-
#7
I am not any expert of any kind, so forgive me if this is an ignorant observation, but does your motherboard support your GPU card? Looking at the Gigabyte website, I do not see your GPU, RX 460 Sapphire GPU listed as being supported. https://www.gigabyte.com/Motherboard/GA-AB350M-Gaming-3-rev-1x#kf
The PCIex16 slots are used for GPUs so no motherboard vendor needs to list which graphics card it supports.
- Apr 13, 2019
- 2,560
- 199
- 5,740
- 404
-
#8
The PCIex16 slots are used for GPUs so no motherboard vendor needs to list which graphics card it supports.
My bad, it lists the compatible CPU’s not GPUs.
- Nov 7, 2011
- 69,588
- 3,198
- 162,240
- 6,865
-
#9
does it have a 6-pin pcie power and you have that plug in?
new or used gpu? use gpuz to id the card?
- Apr 13, 2019
- 2,560
- 199
- 5,740
- 404
- Sep 7, 2017
- 133
- 2
- 1,595
- 1
-
#11
does it have a 6-pin pcie power and you have that plug in?
new or used gpu? use gpuz to id the card?
It is the single fan version without 6pin power connector which sapphire has removed from their site. It is a new GPU. If you could decode the error codes I think we could figure out a cause.
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
|
C |
Question Device security window is empty | Windows 10 | 2 | Jan 20, 2023 |
|
B |
Question “Reboot and select proper Boot device” after installing Windows 10 | Windows 10 | 3 | Dec 25, 2022 |
|
R |
[SOLVED] blue screen of death, no bootable device found, dell notebook hlep | Windows 10 | 16 | Nov 9, 2022 |
|
L |
Discussion Phantom Audio Device causing stutter | Windows 10 | 3 | Oct 27, 2022 |
|
H |
Question Application audio not matching device audio ? | Windows 10 | 2 | Oct 17, 2022 |
|
|
Question Bluetooth toggle not showing up, bluetooth hidden in device manager | Windows 10 | 3 | Oct 16, 2022 |
|
|
Question Coprocessor error in device manager | Windows 10 | 1 | May 25, 2022 |
|
M |
Question LOADS of «Base System Device» in device manager, along with performance counters and Systrem Interrupt Controllers | Windows 10 | 6 | Apr 26, 2022 |
|
|
[SOLVED] What does the down arrow in device manager mean? | Windows 10 | 3 | Mar 27, 2022 |
|
|
[SOLVED] Device Manager refreshing causing performance issues (Win10) | Windows 10 | 3 | Mar 20, 2022 |
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
- Topics
- Sep 7, 2017
- 133
- 2
- 1,595
- 1
-
#1
I get errors after I install my drivers since I bought my GPU. It is an RX 460 Saphhire GPU. After I install any driver no matter old or new ,device manager shows me error 0x15 for my GPU. I tried re-installing windows so do not recommend that. I used DDU but it did not help. Here is all the information you need-
View: https://imgur.com/a/YMbhk2Z
PCI error reporting- 00000007
PCI uncorrectable error severity- 00462030
Probably due to this error I am getting severe issues in games like when I play some game which is heavy on my GPU I start getting a black patch that covers some part of my screen and then disappears. Also the built in console of games start reporting errors and warnings. My GPU utilisation too drops severely due to which I get low frames. All my drivers and BIOS are up to date.
EDIT: If you know of any security settings I am supposed to turn off while installing drivers then please tell. I turned off Avast, windows defender and DEP(Data execution prevention). Also I noticed that I get the message-«Radeon settings have restored every time I restart PC»
Last edited: Apr 21, 2019
- Nov 7, 2011
- 69,588
- 3,198
- 162,240
- 6,865
-
#2
full system spec? include make and model of the psu
- Sep 7, 2017
- 133
- 2
- 1,595
- 1
-
#3
full system spec? include make and model of the psu
My specs-
CPU — Ryzen 3 1200
MOTHERBOARD-AB350M GAMING 3
PSU- CORSAIR VS 450
RAM-16GB DDR4
HDD- WD10EZEX
You need any log file please tell but I want to solve this problem.
- Apr 13, 2019
- 2,560
- 199
- 5,740
- 404
- Sep 7, 2017
- 133
- 2
- 1,595
- 1
-
#5
Yes the problem is common to each and every driver which I try to install for this GPU.
- Apr 13, 2019
- 2,560
- 199
- 5,740
- 404
- Sep 7, 2017
- 133
- 2
- 1,595
- 1
-
#7
I am not any expert of any kind, so forgive me if this is an ignorant observation, but does your motherboard support your GPU card? Looking at the Gigabyte website, I do not see your GPU, RX 460 Sapphire GPU listed as being supported. https://www.gigabyte.com/Motherboard/GA-AB350M-Gaming-3-rev-1x#kf
The PCIex16 slots are used for GPUs so no motherboard vendor needs to list which graphics card it supports.
- Apr 13, 2019
- 2,560
- 199
- 5,740
- 404
-
#8
The PCIex16 slots are used for GPUs so no motherboard vendor needs to list which graphics card it supports.
My bad, it lists the compatible CPU’s not GPUs.
- Nov 7, 2011
- 69,588
- 3,198
- 162,240
- 6,865
-
#9
does it have a 6-pin pcie power and you have that plug in?
new or used gpu? use gpuz to id the card?
- Apr 13, 2019
- 2,560
- 199
- 5,740
- 404
- Sep 7, 2017
- 133
- 2
- 1,595
- 1
-
#11
does it have a 6-pin pcie power and you have that plug in?
new or used gpu? use gpuz to id the card?
It is the single fan version without 6pin power connector which sapphire has removed from their site. It is a new GPU. If you could decode the error codes I think we could figure out a cause.
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
|
C |
Question Device security window is empty | Windows 10 | 2 | Jan 20, 2023 |
|
B |
Question “Reboot and select proper Boot device” after installing Windows 10 | Windows 10 | 3 | Dec 25, 2022 |
|
R |
[SOLVED] blue screen of death, no bootable device found, dell notebook hlep | Windows 10 | 16 | Nov 9, 2022 |
|
L |
Discussion Phantom Audio Device causing stutter | Windows 10 | 3 | Oct 27, 2022 |
|
H |
Question Application audio not matching device audio ? | Windows 10 | 2 | Oct 17, 2022 |
|
|
Question Bluetooth toggle not showing up, bluetooth hidden in device manager | Windows 10 | 3 | Oct 16, 2022 |
|
|
Question Coprocessor error in device manager | Windows 10 | 1 | May 25, 2022 |
|
M |
Question LOADS of «Base System Device» in device manager, along with performance counters and Systrem Interrupt Controllers | Windows 10 | 6 | Apr 26, 2022 |
|
|
[SOLVED] What does the down arrow in device manager mean? | Windows 10 | 3 | Mar 27, 2022 |
|
|
[SOLVED] Device Manager refreshing causing performance issues (Win10) | Windows 10 | 3 | Mar 20, 2022 |
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
- Topics
You should upgrade or use an alternative browser.
-
#1
specs
mobo gigabye aurous b550 elite ax v2
cpu r7 3770x
ram 2x8gb corsair vengance lpx 3200mhs (i think )
gpu asus rog strix 1050ti oc 4gb
also the pci uncorectablle error severity code is 00462030
-
#2
Have you checked GPU temperatures? You can do that with GPU-Z or HWinfo for example, and you should be able to see both core temp. and memory temp. (if i remember correct with 1050ti).
Did this problem occur when you had changes to your hardware, like changed cpu, mobo or something, or did it start all the sudden?
-
#3
Artifacts usually mean there is something wrong with the hardware. Could be overheating GPU, bad contact with PCIE, or GPU memory is diying. I haven’t ever seen any software or BIOS related issues with artifacts, but i guess thats a possibility still.Have you checked GPU temperatures? You can do that with GPU-Z or HWinfo for example, and you should be able to see both core temp. and memory temp. (if i remember correct with 1050ti).
Did this problem occur when you had changes to your hardware, like changed cpu, mobo or something, or did it start all the sudden?
temps are fine 37 degrees celcius
-
#4
temps are fine 37 degrees celcius
it all started when i reset my windows and put my nvme drive in to my pc
so perhaps a corupt windows insall or my installation media is corrupt perhaps?
-
#5
it all started when i reset my windows and put my nvme drive in to my pc
so perhaps a corupt windows insall or my installation media is corrupt perhaps?
Yeah i guess it could be software/driver issue with Windows. BUT, if it started when you installed NVME, maybe you accidently hit GPU or something? I’d take GPU OFF from PCIE-slot and reseat it. Some PCIE-slots are pretty loose and a small movement to GPU can cause issues. And make sure that 6pin power cable connection to GPU is tight enough (usually clicks). I know this sounds a bit far fetched, but from my experience artifacts and PCIE-errors are often caused by something like this, not software or drivers. But thats still a possibility i guess, so if GPU is correctly seated, Windows reinstall is one option.
-
#6
Yeah i guess it could be software/driver issue with Windows. BUT, if it started when you installed NVME, maybe you accidently hit GPU or something? I’d take GPU OFF from PCIE-slot and reseat it. Some PCIE-slots are pretty loose and a small movement to GPU can cause issues. And make sure that 6pin power cable connection to GPU is tight enough (usually clicks). I know this sounds a bit far fetched, but from my experience artifacts and PCIE-errors are often caused by something like this, not software or drivers. But thats still a possibility i guess, so if GPU is correctly seated, Windows reinstall is one option.
i bougght a new motherboard yesterday and it came earlier today so i rebuilt my pc so it cant be that
-
#7
i bougght a new motherboard yesterday and it came earlier today so i rebuilt my pc so it cant be that
Okay, and did the problem start when you installed your motherboard or M.2 drive? You should check your GPU connections. Reseat the GPU to PCIE slot and make sure it clicks, and make sure you have 6pin power cable to GPU (its an OC 1050ti that requires 6pin cable). If those are fine, it could be BIOS issue with motherboard aswell. Check Gigabyte’s site if there is newer version to your BIOS, BUT updating bios can go terribly wrong in worst case screnarios, so make sure you follow every step carefully.
-
#8
Okay, and did the problem start when you installed your motherboard or M.2 drive? You should check your GPU connections. Reseat the GPU to PCIE slot and make sure it clicks, and make sure you have 6pin power cable to GPU (its an OC 1050ti that requires 6pin cable). If those are fine, it could be BIOS issue with motherboard aswell. Check Gigabyte’s site if there is newer version to your BIOS, BUT updating bios can go terribly wrong in worst case screnarios, so make sure you follow every step carefully.
Ot started after I got my nvme drive and installed windows and formatted my c drive I’m fairly certain it’s the gpu it’s self or just a corrupt windows install
-
#9
Ot started after I got my nvme drive and installed windows and formatted my c drive I’m fairly certain it’s the gpu it’s self or just a corrupt windows install
Corrupted Windows should not cause Artifacts and even PCIE-errors are usually not software or windows problems, your problem sounds more like a hardware problem. Read my message and try those tips i gave you, otherwise im done helping man.
-
#10
Corrupted Windows should not cause Artifacts and even PCIE-errors are usually not software or windows problems, your problem sounds more like a hardware problem. Read my message and try those tips i gave you, otherwise im done helping man.
Everything is seated correctly the gpu power light is on if the power wasnt plugged it it would be red
The gpu displays a picture but the cpu dose the work and I dont have a igpu so the card is barely working
-
#11
Everything is seated correctly the gpu power light is on if the power wasnt plugged it it would be red
The gpu displays a picture but the cpu dose the work and I dont have a igpu so the card is barely working
Okay good. And is the GPU seated on the upper PCIE-E lane on the mobo? Mobo manual: » For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. » And that slot is the one on the up and its white unlike the down ones wich are black.
If Windows reinstall is easy job for you (no files to backup etc.) you could try that, but im pretty sure that it won’t solve the problem. Have you tried to reinstall Nvidia drivers?
-
#12
Okay good. And is the GPU seated on the upper PCIE-E lane on the mobo? Mobo manual: » For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. » And that slot is the one on the up and its white unlike the down ones wich are black.If Windows reinstall is easy job for you (no files to backup etc.) you could try that, but im pretty sure that it won’t solve the problem. Have you tried to reinstall Nvidia drivers?
I have yes used ddu
Similar threads
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
|
0 / 0 / 1 Регистрация: 28.07.2021 Сообщений: 130 |
|
|
1 |
|
|
25.12.2021, 11:14. Показов 8132. Ответов 8
Доброго дня! ОС — Windows 7 (x64) Подскажите, в Просмотре событий сыпят постоянные Предупреждения: Компонент: Порт PCI Express Root Шина:Устройство:Функция: 0x0:0x0:0x0 Дополнительные сведения содержатся в подробностях этой записи. Кликните здесь для просмотра всего текста — System — Provider [ Name] Microsoft-Windows-WHEA-Logger EventID 17 Version 0 Level 3 Task 0 Opcode 0 Keywords 0x8000000000000000 — TimeCreated [ SystemTime] 2021-12-25T08:09:56.968750000Z EventRecordID 4667799 — Correlation [ ActivityID] {2481DA6C-5ADE-48DB-B5F9-DB558791E257} — Execution [ ProcessID] 1344 Channel System Computer User-ПК — Security [ UserID] S-1-5-19 — EventData ErrorSource 4
0 |
|
Programming Эксперт 94731 / 64177 / 26122 Регистрация: 12.04.2006 Сообщений: 116,782 |
25.12.2021, 11:14 |
|
8 |
|
0 / 0 / 1 Регистрация: 28.07.2021 Сообщений: 130 |
|
|
25.12.2021, 11:24 [ТС] |
2 |
|
Почему вообще полез в журнал? Знакомый попросил посмотреть, почему у него стал перегружаться комп во время запуска игр. Удаленно обновил дрова на видео, удалил антивирус — не помогло. Он привез системник ко мне, я его тестирую уже часа 3 под нагрузками и комп не перегружается — игры запускаются, 4к видео показывает, тесты всяки епрогоняются… Я вот думаю, может проблема была в БП? И когда системник обесточили, то заряд в БП сбросился и сейчас работает без перегрузок. Но надолго ли?
0 |
|
1184 / 657 / 69 Регистрация: 04.02.2020 Сообщений: 3,862 Записей в блоге: 6 |
|
|
25.12.2021, 12:00 |
3 |
|
Системная плата — Koloe X58
Для линии -12В — это норм показатели в -15? О_о Тут что угодно может быть норма у китайских братьев, мультиметром проверяйте.
1 |
|
0 / 0 / 1 Регистрация: 28.07.2021 Сообщений: 130 |
|
|
25.12.2021, 12:11 [ТС] |
4 |
|
Полный конфиг укажите.
Начитался я про это Событие 17 WHEA-Logger. В основном рекомендуют переставить драйверы с оф.сайта, но большинству это не помогает. Плюс, в данном случае китайская плата, на которую найти нормальные дрова это тот еще квест. Еще рекомендуют прошивать БИОС или Винду переустанавливать. С БИОСом еще может быть, но переустановка Винды вряд ли поможет
0 |
|
1184 / 657 / 69 Регистрация: 04.02.2020 Сообщений: 3,862 Записей в блоге: 6 |
|
|
25.12.2021, 12:52 |
5 |
|
Полный конфиг укажите. Что за блок питания.
мультиметром проверяйте.
0 |
|
0 / 0 / 1 Регистрация: 28.07.2021 Сообщений: 130 |
|
|
25.12.2021, 14:01 [ТС] |
6 |
|
Что за блок питания. Chieftec GPA-700S
мультиметром проверяйте. нет у меня его
0 |
|
1184 / 657 / 69 Регистрация: 04.02.2020 Сообщений: 3,862 Записей в блоге: 6 |
|
|
25.12.2021, 14:04 |
7 |
|
цена вопроса 200-400 рублей, иначе дальше нету смысла продолжать.
0 |
|
0 / 0 / 1 Регистрация: 28.07.2021 Сообщений: 130 |
|
|
25.12.2021, 14:10 [ТС] |
8 |
|
цена вопроса 200-400 рублей да я им все-равно пользоваться не умею)
0 |
|
1184 / 657 / 69 Регистрация: 04.02.2020 Сообщений: 3,862 Записей в блоге: 6 |
|
|
25.12.2021, 14:22 |
9 |
|
да я им все-равно пользоваться не умею)
…
0 |
Страницы: [1] Вниз
- Печать
Автор
Тема: Устранимая аппаратная ошибка WHEA Logger (Прочитано 17664 раз)
Доброго времени суток! Ноут GE62 6QF. Win10 PRo x64.
Суть проблемы: При отключении питания от ноутбука в журнале событий каждую секунду появляется
Устранимая аппаратная ошибка.
Компонент: Порт PCI Express Root
Источник ошибки: Расширенный отчет об ошибках (PCI Express)
Шина:Устройство:Функция: 0x0:0x1C:0x0
ИД поставщика: ИД устройства: 0x8086:0xA110
Код класса: 0x30400
Это длится до тех пор пока питание снова не будет включено.
В чем может быть проблема? BIOS обновил, Firmware тоже, драйвера последние.
Ноутбуку 10 дней.
Записан
поставь систему с нуля и скачай драйвера с оф.сайта.
Записан
MSI GE72 6QF APACHE PRO
поставь систему с нуля и скачай драйвера с оф.сайта.
Пробовал… К сожалению не помогло. Ошибка уже появляется на чистой системе без драйверов
Записан
обнови биос, может поможет
Записан
Проблему частично решил изменением дополнительных параметров питания адаптера беспроводной сети → режим энергосбережения → от батареи → максимальная производительность. Спамить перестало. Ошибка осталась только при запуске системы.
Владельцы GE 62 6QF или у кого wifi адаптер AC3165 в сочетании с процессором 6-го поколения skylake подскажите наблюдалась ли такая же ошибка при сбалансированном или экономичном режиме электропитания.
Проблема не единичная, на форумах других моделей HP, ASUS тоже есть жалобы.
Написал в тех. поддержку, жду ответа.
Записан
Проблему частично решил изменением дополнительных параметров питания адаптера беспроводной сети → режим энергосбережения → от батареи → максимальная производительность. Спамить перестало. Ошибка осталась только при запуске системы.
Владельцы GE 62 6QF или у кого wifi адаптер AC3165 в сочетании с процессором 6-го поколения skylake подскажите наблюдалась ли такая же ошибка при сбалансированном или экономичном режиме электропитания.
Проблема не единичная, на форумах других моделей HP, ASUS тоже есть жалобы.
Написал в тех. поддержку, жду ответа.
Аналогичная проблема. Поделитесь потом пожалуйста ответом тех.поддержки
Записан
Записан
А модель какая ноутбука?
GL72 6QF
Записан
Получил ответ от глобальной поддержки MSI:
Ticket:
PCI Express Root Port error
Content:
Hello,
Sorry for the inconvenience caused.
Please contact our local service center for further assistance.
https://www.msi.com/support/notebook/service-location
Best Regards,
MSI Notebook Technical Application Department
И всё!!
Звонил в наш Support. Описал проблему, отослал все логи, журналы и сопутствующие файлы по почте, потом снова звонил, вообщем они пока не знают что с этим делать и как это лечить. Решения пока нет.
Как временный вариант, описанный выше — изменение схемы управления электропитанием.
Записан
Получил ответ от глобальной поддержки MSI:
Ticket:
PCI Express Root Port error
Content:
Hello,
Sorry for the inconvenience caused.
Please contact our local service center for further assistance.
https://www.msi.com/support/notebook/service-location
Best Regards,
MSI Notebook Technical Application DepartmentИ всё!!
Звонил в наш Support. Описал проблему, отослал все логи, журналы и сопутствующие файлы по почте, потом снова звонил, вообщем они пока не знают что с этим делать и как это лечить. Решения пока нет.
Как временный вариант, описанный выше — изменение схемы управления электропитанием.
спасибо за ответ
Записан
Тоже выскакивает данная ошибка, ранее не наблюдалось, пока не обновил биос и frimware… На сайте интел писали о том, что нужно обновить драйвера Wi-fi, но увы ошибка так и осталась после обновления драйверов…. Кто нить решил данную проблему? Появляется только когда ноутбук (GE72 6qe) не подключён к розетке.
Записан
Тоже выскакивает данная ошибка, ранее не наблюдалось, пока не обновил биос и frimware… На сайте интел писали о том, что нужно обновить драйвера Wi-fi, но увы ошибка так и осталась после обновления драйверов…. Кто нить решил данную проблему? Появляется только когда ноутбук (GE72 6qe) не подключён к розетке.
Во время этой ошибки наблюдался повышенный расход батареи даже в режиме энергосбережения.
В СЦ проблему не решили. Сделали возврат по гарантии.
Записан
- Печать
Страницы: [1] Вверх
- Remove From My Forums
-
Вопрос
-
Доброго дня, комрады!
Проблема с логами, столкнулся сразу после покупки.
Конфигурация ноута:
i5-6300HQ — 8GB DDR4 — GTX 950m — SSD M.2 120 — SSD SATA III 120 — HDD Toshiba 1 TB (вместо DVD)
Установлена Win 10 Home — лицензия была с ноутом.
Текст лога
WHEA-Logger
Устранимая аппаратная ошибка.
Компонент: Порт PCI Express Root
Источник ошибки: Расширенный отчет об ошибках (PCI Express)Шина:Устройство:Функция: 0x0:0x1C:0x4
ИД поставщика:ИД устройства: 0x8086:0xA114
Код класса: 0x30400Дополнительные сведения содержатся в подробностях этой записи.
[ Name] Microsoft-Windows-WHEA-Logger [ Guid] {C26C4F3C-3F66-4E99-8F8A-39405CFED220} Keywords 0x8000000000000000 [ SystemTime] 2018-01-05T10:17:39.365108500Z [ ActivityID] {29C1F179-D699-475A-8E92-E8BEA2246D6C} [ ProcessID] 3412 [ ThreadID] 9304 FRUId {00000000-0000-0000-0000-000000000000} UncorrectableErrorStatus 0x0 CorrectableErrorStatus 0x1000 HeaderLog 00000000000000000000000000000000 RawData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Не смог найти по продукт и вендор ID, что это за устройство, предполагаю где-то чипсет, но не могу понять.
Что было сделано.
Обновлены все драйвера сперва с официального сайта Asus, все установлено без ошибок. Не помогло
Далее были скачаны все официальные последние драйвера с сайтов производителей.
Видеокарту с GeForce, Чипсет HM170 с сайта Intel и остальное так же. Так же без ошибок, все обновилось.
Но проблема не решена.
Насколько обращать внимание на это? Стоит ли парится и искать решение или из текста Logger, значит что то пытается слогировать но не получается, может и черт с ним, пускай не логирует?
Если надо решить, не прошу мне решить проблему вам, просто направьте в нужно русло!
Заранее спасибо!
Ответы
-
Здравствуйте!
Решал такую же проблему и в итоге вышел на то, что 112, 113 и 114 — это ID не устройста, а их Parent’ов.
Если открыть Device Manager и выбрать View->Devices by connection, то можно найти
ACPI x64-based PS -> Microsoft ACPI-Compilant System -> PCI Express Root Complex
А дальше уже знокомые цифры:
— Intel(R) 100 Series/C230 Series Chipset Family PCI Express Root Port #3 — A112
— Intel(R) 100 Series/C230 Series Chipset Family PCI Express Root Port #4 — A113
— Intel(R) 100 Series/C230 Series Chipset Family PCI Express Root Port #5 — A114К ним соответсвенно прицеплены:
— Wifi
— CardReader + Ethernet
— USB3.1 eXtensible Host ControllerТ.е. проблема в USB3.1 контроллере. Но такую же проблему я встречал и на других ноутбуках и других моделях. У кого-то из лока иногода не выходит, у кого-то подключенный жесткий диск постоянно перезапускается …
Но это не похоже на брак. А скорее всего проблема с драйверами к нему.
-
Изменено
29 июня 2018 г. 14:35
-
Предложено в качестве ответа
Vector BCOModerator
29 июня 2018 г. 14:43 -
Помечено в качестве ответа
Anton Sashev IvanovOwner
10 декабря 2018 г. 10:11
-
Изменено