Принтер drystar 5302 ошибка метки

  • Page 1
    Drystar 5302 Reference manual…
  • Page 2
    Agfa-Gevaert N.V. shall under no circumstances be liable for any damage arising from the use or inability to use any information, apparatus, method or process disclosed in this document.

  • Page 3: Table Of Contents

    ………………17 Operating modes ………………19 Control modes (local and remote) …………… 21 The local user interface …………….22 Switching on the Drystar 5302 …………..32 Switching off the Drystar 5302 …………..34 Chapter 2: Basic operation (Operator mode) ……….35 Overview of operator functions …………..36…

  • Page 4
    5302 R RYSTAR EFERENCE MANUAL Chapter 4: Controlling the Drystar 5302 via a remote PC (with browser) ………………….151 Features …………………. 152 Setup ………………….153 Setting up the connection …………….155 Starting the remote session ……………. 160 Chapter 5: System description …………..
  • Page 5
    5302 R RYSTAR EFERENCE MANUAL Appendix C: Quality Control Charts …………211 Appendix D: Index ………………217 2830A EN 20050526…
  • Page 6
    5302 R RYSTAR EFERENCE MANUAL 2830A EN 20050526…

  • Page 7: Chapter 1: Introducing The Drystar 5302

    Chapter Introducing the Drystar 5302 This chapter introduces the Drystar 5302 to the user and draws attention to important safety precautions. Drystar 5302 features Safety precautions Security precautions Safety compliance Privacy and security Operating modes Control modes (local and remote)

  • Page 8: Drystar 5302 Features

    Any combination of two film formats can be used “online”. Both input trays can be adjusted for all film formats. The input trays of the Drystar 5302 are equipped with an RF-tag reader, which automatically traces the films used in the printer and protects the printer when detecting non-identified media.

  • Page 9
    RYSTAR EFERENCE MANUAL Number of output trays. The Drystar 5302 is equipped with 1 output tray, which is suitable for the multiple formats without any adjustment. Integrated A#sharp technology A#sharp is a technology that enhances image sharpness for the Drystar 5302.
  • Page 10
    Agfa representative. The functionality of the Drystar 5302 is completely controlled via the network. You can control the working of the Drystar 5302 via the local keypad or via a remote PC with a functioning web browser. Customizable features Consumables.

  • Page 11: Safety Precautions

    EFERENCE MANUAL Safety precautions The Drystar 5302 must only be operated according to its specifications and its intended use. Any operation not corresponding to the specifications or intended use may result in hazards, which in turn may lead to serious injuries or fatal accidents (for example electric shocks).

  • Page 12
    In order to reduce the risk of electric shock, do not remove any covers. Type B equipment: Indicates that the Drystar 5302 complies with the limits for type B equipment. Supplementary protective earth connector: Provides a connection between the Drystar 5302 and the potential equalization bus bar of the electrical system as found in medical environments.
  • Page 13
    EFERENCE MANUAL Transport after installation Before moving the printer, always switch off the machine. The Drystar 5302 should be transported by 3 persons or if not possible with 2. Refer to the Installation manual for more information. When doing this, the stability and the structure of the tabletop have to be taken into account.

  • Page 14: Security Precautions

    CAUTION (U.S.A. only): In accordance with U.S. Law, this device can only be sold to or ordered by a licensed physician. Printed images should be treated as patient records and should only be viewed by authorized personnel. Introducing the Drystar 5302 2830A EN 20050526…

  • Page 15: Safety Compliance

    EC: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Compliances The Drystar 5302 has been tested and found to comply with the following international standards and regulations: • the Medical Devices Directive 93/42/EEC •…

  • Page 16
    • GB17625.1-2003 (for CCC-Mark) Seismic (earthquake) requirements The printer meets the CA (Californian) requirements. Labels The Drystar 5302 carries the CE, TÜV, cULus and CCC labels. CCC label CE, TÜV and cULus label Introducing the Drystar 5302 2830A EN 20050526…

  • Page 17: Privacy And Security

    Insurance Portability and Accountability Act) and to meet the IHE standards (Integrated Healthcare Enterprise) some security features are included in the user interface of the Drystar 5302 (available via the web pages only: under ‘Security tools’. Refer to the chapter ‘Controlling the Drystar 5302 via a remote…

  • Page 18
    ‘communication allowed’ table. A Certification Authority (CA) is responsible for creating a certificate. The CA can be the hospital, Agfa or a third party. This CA distributes the certificate to the hospital security responsible or service technician, who for his part: •…

  • Page 19: Operating Modes

    5302 R RYSTAR EFERENCE MANUAL Operating modes The Drystar 5302 can be operated in five modes: Operator mode, Key- operator mode, Service mode, Specialist mode and Administrator mode. Operator mode The Operator mode groups all basic functions that are intended for radiographers without special technical skills: •…

  • Page 20
    Specialist mode The specialist mode functions are reserved for trained service personnel of the Agfa Customer Support Center. The specialist mode is password protected and is only accessible by browser via a remote PC. Administrator mode (also known as Security) The Administrator mode functions are reserved for the System Administrator.

  • Page 21: Control Modes (Local And Remote)

    RYSTAR EFERENCE MANUAL Control modes (local and remote) You can control the working of the Drystar 5302 via the local keypad or via a networked remote PC. The table below gives an overview of the operating modes you can access locally and/or via the remote PC.

  • Page 22: The Local User Interface

    Power/Reset button Display Keypad Status indicator LED Film input trays Film output tray Never try to open the printer when the Drystar 5302 is printing a film. Always follow the instructions on the display! Introducing the Drystar 5302 2830A EN 20050526…

  • Page 23
    • To reset the printer. Do NOT press the Power/Reset button without first following the procedure to stop printing when the Drystar 5302 is printing a film. Refer ‘Switching off the Drystar 5302’ on page 34. 2830A EN 20050526…

  • Page 24: Rear Panel

    Network • To connect to the hospital network. connector Input/output • To connect a terminal PC (used by the Service connector engineer). Power connector • To connect the printer power cord. Introducing the Drystar 5302 2830A EN 20050526…

  • Page 25
    5302 R RYSTAR EFERENCE MANUAL Working with Compact flash cards (CF-card) The Drystar 5302 is equipped with an external CF-card slot, which is located at the rear side. Inserting a CF-card To insert a CF-card in the Drystar 5302: Hold the CF-card vertically with the connector holes in front of the slot and with the flat surface pointing to the left.
  • Page 26
    5302 R RYSTAR EFERENCE MANUAL Removing a CF-card To remove a CF-card from the Drystar 5302 slot: Push the unlocking lever underneath the CF-card slot. The CF-card is pushed slightly outward. Remove the CF-card gently from the slot. Introducing the Drystar 5302…

  • Page 27: The Keypad

    RYSTAR EFERENCE MANUAL Audio signals The Drystar 5302 gives status information via beeps. The length of the beep indicates the response of the system to a key command. • A short beep means that Drystar 5302 has accepted the key command and is starting the operation.

  • Page 28
    5302 R RYSTAR EFERENCE MANUAL The Drystar 5302 keypad features the following keys: To access the advanced functions of the key- Key- operator mode. Refer to the chapter ‘Advanced operator key operation (Key-operator mode)’. To quit the current function or exit a menu without Escape key saving modifications.

  • Page 29: The Display

    5302 R RYSTAR EFERENCE MANUAL The display The Drystar 5302 control panel has a backlit LCD display. We distinguish two panel types depending on the selected language: • a backlit LCD display with 4 lines for Western languages (e.g. Dutch, French, Portuguese, Swedish, …).

  • Page 30
    In operator mode, appropriate information is displayed in accordance with the status of the printer. The operator basic screen looks as follows, indicating that the Drystar 5302 is ready for operation and that no job is currently being executed. When the printer is busy with at least one print job, the print queue screen is displayed: Mod.name…

  • Page 31: Data Entry

    To accept an entry in a menu, press the Confirm key. • A short beep acknowledges and terminates the entry. • The Drystar 5302 will sound a long beep if you press a key that is not to be used at that moment. 2830A EN 20050526 Introducing the Drystar 5302…

  • Page 32: Switching On The Drystar 5302

    ‘Safety precautions’ on page 11. Follow the procedure below to ensure proper start-up of the Drystar 5302 and to check that everything is working correctly. Check that the power cord is plugged in and then switch on the printer by pressing the Power/Reset button.

  • Page 33
    If, on the front panel display, the READY message is shown, the status indicator LED is constantly green. It takes 10 minutes (starting up of the Drystar 5302 and heating up of the thermal print head) before you can start printing. The display will inform you that the printer is warming up: •…

  • Page 34: Switching Off The Drystar 5302

    Queued print jobs will be stored on the hard disk and will be resumed next time the printer is switched on. Press the Power/Reset button to switch off the Drystar 5302. • If the printer is printing, it will finish that print job: •…

  • Page 35: Chapter 2: Basic Operation (Operator Mode)

    This chapter will inform on how to manage the print queue, how to print films with priority and how to load new films. Overview of operator functions Managing the print queue Pausing the print queue Viewing the film count info Viewing the printer status About Drystar 5302 consumables Loading films…

  • Page 36: Overview Of Operator Functions

    RYSTAR EFERENCE MANUAL Overview of operator functions This section focuses on the basic operating principles of the Drystar 5302. After reading this chapter, the operator should be able to produce diagnostic usable hardcopies. No special technical skills are required. All basic operator functions can be activated directly by pressing a single key on the keypad.

  • Page 37: Managing The Print Queue

    Drystar 5302. Refer to the User manual of the acquisition modality for more information.

  • Page 38
    5302 R RYSTAR EFERENCE MANUAL A description of the possible status of the jobs is listed in the table below: Status Description Printing Printing of this job is in progress. The necessary calculations are already being Calculating made before printing of the job can be started. Waiting Jobs are queued in the printer memory.

  • Page 39: Pausing The Print Queue

    RYSTAR EFERENCE MANUAL Pausing the print queue When the Drystar 5302 is printing, you can always pause the print queue by entering the operator menu. To pause the print queue, proceed as follows: During a print job, the ‘print’ screen is displayed: Mod.name…

  • Page 40: Viewing The Film Count Info

    EFERENCE MANUAL Viewing the film count info When the Drystar 5302 is printing, you can always view the number of films left in the trays by entering the operator menu. Do not open the input trays to view the number of loaded films while the…

  • Page 41: Viewing The Printer Status

    RYSTAR EFERENCE MANUAL Viewing the printer status When the Drystar 5302 is printing, you can always view the printer status by entering the operator menu. To view the printer status, proceed as follows: During a print job, the ‘print’ screen is displayed: Mod.name…

  • Page 42: About Drystar 5302 Consumables

    RYSTAR EFERENCE MANUAL About Drystar 5302 consumables The Drystar 5302 can handle blue-transparent (Drystar DT 2B) and clear- transparent (Drystar DT 2C) films. Available film formats are 8×10”, 10×12”, 11×14”, 14×14” and 14×17”. The printer has 2 input trays. Both trays can handle all listed film types and formats.

  • Page 43
    5302 R RYSTAR EFERENCE MANUAL Appropriate labels have been applied on the input tray(s) by the service personnel at installation of the printer, indicating the type of new film to be loaded when the tray is empty. 2830A EN 20050526 Basic operation (Operator mode)

  • Page 44: Loading Films

    The Drystar 5302 can be loaded with 8×10”, 10×12”, 11×14”, 14×14” and 14×17” films. The Drystar 5302 can be loaded with new films in full daylight. Loading films is easy and can be done very quickly. Follow the procedures as described in this section.

  • Page 45
    Load a new film pack. Refer to ‘Film loading procedure’ on page 46. When the Drystar 5302 is in the ready state and an input tray is empty: The display shows the following message: Blinking Open the lower input tray.
  • Page 46
    5302 R RYSTAR EFERENCE MANUAL Film loading procedure Open the empty input tray. To avoid possible film jams, make sure to open input tray all the way. The printer is ready to receive a new film when the following message appears: Basic operation (Operator mode) 2830A EN 20050526…
  • Page 47
    5302 R RYSTAR EFERENCE MANUAL Remove the white (protective) film sheet. Take film pack, and open it. Verify that the film type on the film pack corresponds with the sticker on the tray! If you do use an other film type, you are advised to change the label on the tray. You can put the film pack onto a table to make manipulation easier.
  • Page 48
    5302 R RYSTAR EFERENCE MANUAL Remove the plastic film bag partially. Slide the film pack into the input tray, and remove the plastic film bag completely. Basic operation (Operator mode) 2830A EN 20050526…
  • Page 49
    ‘Clearing of film jams’ on page 181. The Drystar 5302 resumes printing as soon as the tray is closed. Loading instructions are also available on the input tray cover. When a film job cannot be done because the tray to which the job is assigned is empty, then the printer will check if the films in the other tray can be used for this and other print jobs in the print queue.
  • Page 50
    5302 R RYSTAR EFERENCE MANUAL Checking the correct position of a film in the input tray You can verify that the film is properly loaded by watching the lower right corner of the films in the input tray. The rounding of this corner should be smaller than the other three corners.

  • Page 51: Chapter 3: Advanced Operation (Key-Operator Mode)

    Chapter Advanced operation (Key-operator mode) This chapter gives an overview of functions for the advanced user: Overview of key-operator functions Viewing printer information Changing the configuration settings Printing images Saving the configuration settings Restoring the configuration settings Performing the calibration procedures Cleaning the print head Service actions Quality Control…

  • Page 52: Overview Of Key-Operator Functions

    EFERENCE MANUAL Overview of key-operator functions The key-operator menus make it possible to use the Drystar 5302 advanced functions. For general information on the key functions of the Drystar 5302, refer to ‘The local user interface’ on page 22. Overview…

  • Page 53: General

    5302 R RYSTAR EFERENCE MANUAL The menu structure General Show settings General Other… Upper input tray Lower input tray Time and date Network(DICOM) Language Image quality Beep on empty tray Logical printers Installed datasets General Change settings Film view Upper Input tray Film type Lower Input tray Film format…

  • Page 54
    7 Service Actions 8 Quality Control 9 Installation When you try to enter the key-operator mode while the Drystar 5302 is printing, it will first finish the active print job(s): Blinking If certain mandatory site-specific data has not yet been entered, the following screen is displayed when entering the key-operator mode (refer to ‘Changing the…
  • Page 55
    Press the Confirm key to return to the key-operator menu. Otherwise, the key- operator menu will be closed. The Drystar 5302 will sound a long beep if you press a key that is not to be used at that moment.

  • Page 56: Viewing Printer Information

    5302 R RYSTAR EFERENCE MANUAL Viewing printer information A number of data and parameter settings of the printer can be viewed by using the ‘Show settings’ function: Show settings Page General ‘Viewing general information’ Input tray ‘Viewing input tray information’ Network (DICOM) ‘Viewing network (DICOM) information’…

  • Page 57
    5302 R RYSTAR EFERENCE MANUAL Accessing the Show settings menu Press the Key-operator key to enter the key-operator mode. On the key-operator main menu, press the Confirm key to select ‘Show settings’. The Show settings menu is displayed: 5 Image quality 6 Logical printers 7 Installed datasets This menu is the starting point for viewing printer information (see next pages).

  • Page 58: Viewing General Information

    More information, such as site-specific data, can be viewed via the browser only. Refer to the chapter ‘Controlling the Drystar 5302 via a remote PC (with browser)’. Press the Confirm key to return to the Show settings menu. Advanced operation (Key-operator mode)

  • Page 59: Viewing Input Tray Information

    5302 R RYSTAR EFERENCE MANUAL Viewing input tray information In this manual, we always will elaborate a case for the lower tray. The procedures of showing the settings are identical for the upper tray. On the Show settings menu, press the Down key once to see the upper tray settings, twice to see the lower tray settings Perform steps 1 and 2 of the ‘Accessing the Show settings menu’…

  • Page 60: Viewing Network (Dicom) Information

    AE-title of the Drystar 5302, • the hostname of the Drystar 5302, • the domain name, • the IP address of the Drystar 5302, • the netmask used for the Drystar 5302, • the IP address of the router, •…

  • Page 61: Viewing General Image Quality Information

    5302 R RYSTAR EFERENCE MANUAL Viewing general image quality information Perform steps 1 and 2 of the ‘Accessing the Show settings menu’ procedure on page 57. On the Show settings menu, press the Down key four times, followed by the Confirm key to select ‘Image quality’.

  • Page 62
    5302 R RYSTAR EFERENCE MANUAL The default densitometer type is displayed: X-rite 310 Press the Confirm key to return to step 3, then press the Escape key to return to the Image quality menu (see step 2). In the Image quality menu, press the Escape key to return to the Show settings menu.

  • Page 63: Viewing Image Quality Information For A Modality

    5302 R RYSTAR EFERENCE MANUAL Viewing image quality information for a modality Perform steps 1 and 2 of the ‘Accessing the Show settings menu’ procedure on page 57. On the Show settings menu, press the Down key four times, followed by the Confirm key to select ‘Image quality’.

  • Page 64: Viewing The Logical Printers Configuration

    2 other logical printers e.g. DS_5302_2, DS_5302_3, … This screen gives an overview of the logical printers defined in the Drystar 5302. The logical printers information can be helpful when assigning a modality output to a particular Drystar 5302 profile. Configuring logical printers can be done via the remote webpages.

  • Page 65: Viewing Installed Datasets Information

    5302 R RYSTAR EFERENCE MANUAL Viewing installed datasets information Perform steps 1 and 2 of the ‘Accessing the Show settings menu’ procedure on page 57. On the Show settings menu, press the Down key six times, followed by the Confirm key to select ‘Installed datasets’. The ‘Installed datasets’…

  • Page 66: Changing The Configuration Settings

    • Via the LOCAL keypad, you can access only the MAIN features. • Via a REMOTE connection, you can access ALL features. For more information about controlling the Drystar 5302 via a remote browser PC, refer to the chapter ‘Controlling the Drystar 5302 via a remote PC (with browser)’…

  • Page 67
    5302 R RYSTAR EFERENCE MANUAL ‘Adding a modality’ Image quality ‘Changing general image quality settings — Film calibration’ ‘Changing general image quality settings — Default densitometer’ ‘Changing Image quality settings for a modality — Selecting a lookup table’ ‘Changing Image quality settings for a modality — Changing the interpolation’…
  • Page 68
    The ‘Change settings’ menu is displayed: 5 Image quality This menu is the starting point for changing the Drystar 5302 settings. Press the Escape key to return to the key-operator main menu. Press the Escape key to quit the key-operator mode.
  • Page 69
    5302 R RYSTAR EFERENCE MANUAL When the automatic backup is finished, you will also be asked to create a back- up of the new settings on an external CF-card. Do one of the following: • If you want to save the configuration on the back-up CF-card, press the Confirm key (YES).

  • Page 70: Changing The Date And Time

    5302 R RYSTAR EFERENCE MANUAL Changing the general settings Changing the date and time Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Confirm key to select ‘General’. The ‘General’…

  • Page 71: Changing The Language

    The ‘General’ screen is displayed: On the ‘General’ screen, press the Down key, followed by the Confirm key to select ‘Language’. The ‘Language’ screen is displayed with the available languages (contact Agfa for the latest Drystar 5302 language availability status). For example: 1*English…

  • Page 72: Changing The Beep On Empty Tray Settings

    5302 R RYSTAR EFERENCE MANUAL Changing the beep on empty tray settings Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on page to select the ‘General’ screen. On the Change settings menu, press the Confirm key to select ‘General’. The ‘General’…

  • Page 73: Changing The Site-Specific Data (Via Remote Browser Only)

    5302 R RYSTAR EFERENCE MANUAL Changing the site-specific data (via remote browser only) The following site-specific data are stored in the Drystar 5302 memory: Field Mandatory Site name Site address (contact) City Tel. country code Tel. number Modem Department Contact person…

  • Page 74: Changing The Film View

    5302 R RYSTAR EFERENCE MANUAL Changing the input tray settings In this manual, we always will elaborate a case for the lower tray. The procedures of changing the settings are identical for the upper tray. On the Change settings menu, press the Down key once to change the upper tray settings, twice to change the lower tray settings.

  • Page 75: Changing The Film Type

    5302 R RYSTAR EFERENCE MANUAL Changing the film type Using the following procedure you can overrule the film type, which is automatically read by means of the Film Identification tag on the film pack. This procedure is only to be used exceptionally when the Film Identification tag info is incorrect.

  • Page 76: Changing The Film Format

    5302 R RYSTAR EFERENCE MANUAL Changing the film format Using the following procedure you can overrule the film format, which is automatically read by means of the Film Identification tag on the film pack. This procedure is only to be used exceptionally when the Film Identification tag info is incorrect.

  • Page 77
    The overrule settings remain active until a new film pack is loaded. If the format is changed from the previous format, the following message appears (example): 11×14″ ‘Drystar 5302 network You must modify the tray configuration. Refer to configuration’ on page for more information.

  • Page 78: Changing The Printer Ae-Title

    5302 R RYSTAR EFERENCE MANUAL Changing network (DICOM) configuration Changing the printer AE-title Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Down key three times, followed by the Confirm key to select ‘Network (DICOM)’.

  • Page 79: Changing The Hostname

    5302 R RYSTAR EFERENCE MANUAL Changing the hostname Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Down key three times, followed by the Confirm key to select ‘Network (DICOM)’. The ‘Network (DICOM)’…

  • Page 80: Changing The Domain Name

    5302 R RYSTAR EFERENCE MANUAL Changing the domain name Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Down key three times, followed by the Confirm key to select ‘Network (DICOM)’. The ‘Network (DICOM)’…

  • Page 81: Changing The Printer Ip Address

    5302 R RYSTAR EFERENCE MANUAL Changing the printer IP address Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Down key three times, followed by the Confirm key to select ‘Network (DICOM)’.

  • Page 82
    5302 R RYSTAR EFERENCE MANUAL Example 1: if the IP address is 120.000.120.120, then the data entry should be as follows: Example 2: if the IP address is 120.0.120.120, then the data entry should be as follows: Press the Confirm key to store the data, or the Escape key to quit the procedure without any changes.

  • Page 83: Changing The Netmask

    5302 R RYSTAR EFERENCE MANUAL Changing the netmask Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Down key three times, followed by the Confirm key to select ‘Network (DICOM)’. The ‘Network (DICOM)’…

  • Page 84: Changing The Router Ip Address

    5302 R RYSTAR EFERENCE MANUAL Changing the router IP address Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Down key three times, followed by the Confirm key to select ‘Network (DICOM)’.

  • Page 85: Removing A Modality

    5302 R RYSTAR EFERENCE MANUAL Removing a modality Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Down key three times, followed by the Confirm key to select ‘Network (DICOM)’. The ‘Network (DICOM)’…

  • Page 86: Adding A Modality

    5302 R RYSTAR EFERENCE MANUAL Adding a modality Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Down key three times, followed by the Confirm key to select ‘Network (DICOM)’. The ‘Network (DICOM)’…

  • Page 87
    5302 R RYSTAR EFERENCE MANUAL Press the Confirm key to store the data, or the Escape key to quit the procedure without any changes. The ‘Select modality brand name’ screen is displayed: 2 FUJI 3 SIEMENS 4 PHILIPS Press the up/down arrow keys to select the appropriate modality brand name. If you have selected ‘Default profile’, the modality AE-title will be linked with the default settings.
  • Page 88
    5302 R RYSTAR EFERENCE MANUAL Press the Confirm key to store the data, or the Escape key to quit the procedure without any changes. The ‘Select preferred FILM TYPE for’ screen will appear: <modality name> 1*Drystar DT 2B 2 Drystar DT 2C You can find the film type on the film packaging, e.g.

  • Page 89: Changing General Image Quality Settings — Film Calibration

    5302 R RYSTAR EFERENCE MANUAL Changing the image quality settings Changing general image quality settings — Film calibration Perform steps 1 and 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Down key four times, followed by the Confirm key to select ‘Image quality’.

  • Page 90
    RYSTAR EFERENCE MANUAL Press the up/down key to select the preferred film calibration default. When the setting is ON, the Drystar 5302 will ask you to enter the calibration frequency: Automatic film calibration after every ‘x’ packs Enter the calibration frequency by means of the up/down key. Refer to ‘Data entry’…

  • Page 91: Changing General Image Quality Settings — Default Densitometer

    5302 R RYSTAR EFERENCE MANUAL Changing general image quality settings — Default densitometer Perform steps 1 and 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Down key four times, followed by the Confirm key to select ‘Image quality’.

  • Page 92: Changing Image Quality Settings For A Modality — Selecting A Lookup Table

    • If you want to attribute the default profile, select ‘Profile default’ and press the Confirm key. The Drystar 5302 will be loaded with these settings and return to the ‘Image quality’ main menu (see step 2). • If you want to add a custom profile, select ‘Select other’ and press the Confirm key.

  • Page 93
    5302 R RYSTAR EFERENCE MANUAL The Drystar 5302 will continue with the ‘Select for Modality’ screen, allowing you to change the Look-up table, the Interpolation and the maximum density (Dmax) values manually. <Modality name> 3 Dmax In the ‘Select for Modality’ screen, press the Confirm key to select ‘Look-up table’.
  • Page 94
    • If you want to attribute the default profile, select ‘Profile default’ and press the Confirm key. The Drystar 5302 will be loaded with these settings and return to the ‘Image quality’ main menu (see step 2). • If you want to add a custom profile, select ‘Select other’ and press the Confirm key.
  • Page 95
    5302 R RYSTAR EFERENCE MANUAL The Drystar 5302 will continue with the ‘Select for Modality’ screen, allowing you to change the Look-up table, the Interpolation and the maximum density (Dmax) values manually. <Modality name> 3 Dmax In the ‘Select for Modality’ screen, press the Down key, followed by the Confirm key to select ‘Interpolation’.

  • Page 96: Changing Image Quality Settings For A Modality — Changing The Maximum

    • If you want to attribute the default profile, select ‘Profile default’ and press the Confirm key. The Drystar 5302 will be loaded with these settings and return to the ‘Image quality’ main menu (see step 2). • If you want to add a custom profile, select ‘Select other’ and press the Confirm key.

  • Page 97
    5302 R RYSTAR EFERENCE MANUAL The Drystar 5302 will continue with the ‘Select for Modality’ screen, allowing you to change the Look-up table, the Interpolation and the maximum density (Dmax) values manually. <Modality name> 3 Dmax In the ‘Select for Modality’ screen, press the Down key twice, followed by the Confirm key to select ‘Dmax’.

  • Page 98: Printing Images

    5302 R RYSTAR EFERENCE MANUAL Printing images A number of ‘test’ images can be printed, either from an external CF-card or from the hard disk: Print image Page Test image ‘Printing test images’ From CF-card ‘Printing files from an external CF-card’ Accessing the print images menu Press the Key-operator key to enter the key-operator mode.

  • Page 99
    RYSTAR EFERENCE MANUAL Printing test images Test images are useful for checking the print quality. The Drystar 5302 offers a number of built-in test images stored on the hard disk. Perform steps 1 to 2 of the ‘Accessing the print images menu’…
  • Page 100
    5302 R RYSTAR EFERENCE MANUAL After about five seconds this screen will disappear. If you try to print another image, the following message will appear: Wait until one or more print jobs have finished before launching a new one. Printing files from an external CF-card TIFF images stored on an external CF-card can be printed using the ‘Print from CF-card’…
  • Page 101
    5302 R RYSTAR EFERENCE MANUAL Press the up/down arrow keys to select the desired image file, followed by the Confirm key. The ‘Number of copies’ screen is displayed: Number of desired copies Press the arrow keys to increment/decrement the number. followed by the Confirm key to confirm the number of copies.

  • Page 102: Saving The Configuration Settings

    5302 R RYSTAR EFERENCE MANUAL Saving the configuration settings The save configuration menu allows you to save of all printer settings or to save only the network setting: Save configuration Page General ‘General save configuration procedure’ Network only ‘Network only save configuration procedure’ Accessing the save configuration menu Press the Key-operator key to enter the key-operator mode.

  • Page 103
    5302 R RYSTAR EFERENCE MANUAL General save configuration procedure Each time the settings have been changed and confirmed, an automatic back- up of the old configuration is made on the hard disk. You will also be asked to create a back-up on an external CF-card. It is also possible (and recommended) to regularly make a back-up of the printer settings to ensure safe restoring of the values when required.
  • Page 104
    5302 R RYSTAR EFERENCE MANUAL Remove the CF-card. Refer to ‘Removing a CF-card’ on page 26. As soon as the CF-card has been removed, the following screen is displayed: BAC_<save_set_name> The <save set name > is preceded by the characters “BAC”. BAC stands for General backup.
  • Page 105
    5302 R RYSTAR EFERENCE MANUAL Network only save configuration procedure Perform steps 1 to 2 of the ‘Accessing the save configuration menu’ procedure on page to select the ‘Save configuration’ screen. On the Save configuration menu, press the Down key, followed by the Confirm key to select ‘Network only’.
  • Page 106
    5302 R RYSTAR EFERENCE MANUAL Remove the CF-card. Refer to ‘Removing a CF-card’ on page 26. As soon as the CF-card has been removed, the following screen is displayed: NWS_<save_set_name> The <save set name > is preceded by the characters “NWS”. NWS stands for Network only.

  • Page 107: Restoring The Configuration Settings

    5302 R RYSTAR EFERENCE MANUAL Restoring the configuration settings The restore configuration menu allows you to restore all configuration settings of the printer or to restore only the network setting: Restore configuration Page General ‘Restoring the printer settings’ Network only ‘Restoring the network settings’…

  • Page 108
    5302 R RYSTAR EFERENCE MANUAL Restoring the printer settings When necessary, you can restore the configuration settings of the printer. The following functions are available for restoring a back-up copy of the configuration files: • ‘Restoring printer settings from an external CF-card’ (page 108) •…
  • Page 109
    5302 R RYSTAR EFERENCE MANUAL Insert the CF-card, which contains a back-up of the printer settings. Refer to ‘Inserting a CF-card’ on page 25. Make sure that you insert the correct CF-card, containing the printer settings you want to restore. If no data are available on the CF-card, the following message is displayed: If multiple data are present on the CF-card, the following screens appear successively:…
  • Page 110
    5302 R RYSTAR EFERENCE MANUAL Press the Confirm key (YES) to proceed with the selected file, or the Escape key (NO) to quit the procedure without any changes. If you press the Confirm key, the printer will restore the configuration from the external CF-card on the hard disk and the following screens appear successively: A:<path><filename>…
  • Page 111
    5302 R RYSTAR EFERENCE MANUAL Restoring printer settings from the hard disk Perform steps 1 to 2 of the ‘Accessing the re store configuration menu’ procedure on page 107. On the Restore configuration menu, press the Confirm key to select ‘General’. The following ‘Restore Configuration’…

  • Page 112: Restoring The Network Settings

    5302 R RYSTAR EFERENCE MANUAL Restoring the network settings When necessary, you can restore the network settings of the printer. You can only restore a back-up copy of the network settings from an external CF-card. Perform steps 1 to 2 of the ‘Accessing the re store configuration menu’…

  • Page 113
    5302 R RYSTAR EFERENCE MANUAL Press the Confirm key (YES) to proceed with the selected file, or the Escape key (NO) to quit the procedure without any changes. If you press the Confirm key, the printer will restore the network settings from the external CF-card on the hard disk and the following screens appear successively: A:<path><filename>…

  • Page 114: Performing The Calibration Procedures

    5302 R RYSTAR EFERENCE MANUAL Performing the calibration procedures Accessing the Calibration menu Press the Key-operator key to enter the key-operator mode. On the key-operator main menu, press the Down key five times followed by the Confirm key to select ‘Calibration’. The ‘Select calibration’…

  • Page 115
    MDM (Macro Densitometer). The Drystar 5302 is being calibrated during the printing process. If the Drystar 5302 cannot read the Film identification tag, no calibration is possible and the following message is displayed: Press the Confirm key to retry calibrating.
  • Page 116
    5302 R RYSTAR EFERENCE MANUAL When the film calibration has been completed successfully, three cases are possible: • Calibration successful, results OK. The obtained maximum density (Dmax (3.10)) after calibration is displayed: Blinking Blinking Maximum density = 3.10 (X-Rite 301) •…
  • Page 117
    5302 R RYSTAR EFERENCE MANUAL Density response of Drystar media Different densitometers can give different results for measuring the same density area on a Drystar film. This is due to spectral response differences between the densitometers. The density values used in this manual are based on the Macbeth TR924 densitometer.

  • Page 118: Cleaning The Print Head

    5302 R RYSTAR EFERENCE MANUAL Cleaning the print head Print head cleaning must be done when image quality problems occur. To clean the print head: Press the Key-operator key to enter the key-operator mode. On the key-operator main menu, press the Down key five times, followed by the Confirm key to select ‘Calibration’.

  • Page 119
    5302 R RYSTAR EFERENCE MANUAL Open the top cover. As soon as the top cover is opened, the ‘Thermal head cleaning’ screen continues giving the following instructions: Open the hold-down bracket. 2830A EN 20050526 Advanced operation (Key-operator mode)
  • Page 120
    5302 R RYSTAR EFERENCE MANUAL Open the print head unit. The print head unit can be warm. Locate and check on sight the print head resistor line. Be careful not to touch the print head resistor line with your fingers. Advanced operation (Key-operator mode) 2830A EN 20050526…
  • Page 121
    5302 R RYSTAR EFERENCE MANUAL Clean the print head resistor line. Gently pass over the resistor line a few times with a lint free cloth, slightly moistened with Isopropyl alcohol or Ethanol. Do this only in one direction, i.e. from left to right, without lifting the cloth.

  • Page 122: Service Actions

    5302 R RYSTAR EFERENCE MANUAL Service actions The Drystar 5302 is capable of assisting the Service engineer and/or hospital technician to maintain or repair the printer. Overview of service actions Four groups of service actions are provided by the Drystar 5302.

  • Page 123
    If no data is available for the selected service action, the following screen appears: • If data available for the selected service action, detailed screens appears. Please contact your AGFA representative for detailed information about the various service action screens. Press the Escape key to return to the key-operator main menu.

  • Page 124: Quality Control

    In order to establish and maintain consistent image quality, a regular evaluation of image quality is advised. The Drystar 5302 contains an automatic QC feature that has been designed to comply with the grayscale reproduction constancy test, according to the international standard IEC 1223-2-4.

  • Page 125
    EFERENCE MANUAL Establishing the reference values and verifying image quality After installation of a new Drystar 5302 and before initial use you must establish Quality Control aim values. These values will be used as the base line for comparison when daily Quality Control is done. These values should be determined again after major service, repair or software update.
  • Page 126
    5302 R RYSTAR EFERENCE MANUAL QC test image The QC image has several additional fields where the QC data can be filled in. This image should be filed as part of the QC procedure. The following two examples illustrate a QC test image for a different film format.
  • Page 127
    5302 R RYSTAR EFERENCE MANUAL • QC test image for film format 8×10” Geometry test Daily density tests Max D Max D Hi D Hi D Mid D Mid D Lo D Lo D Base Base + Fog + Fog Density Difference (Hi D — Lo D) Weekly spatial…
  • Page 128
    • Mid density • High density The densitometer of the Drystar 5302 is calibrated at installation. Authorized service personnel should recalibrate the densitometer annually or after major service or repair. To establish the daily operating levels, proceed as follows: Press the Key-operator key to enter the Key-operator mode.
  • Page 129
    Press the Up/Down arrow keys to select the desired tray, followed by the Confirm key. The following screens appear successively: The Drystar 5302 will automatically print the QC test image. After the image is printed, the system will display the optical density values: The density levels are displayed, e.g: Max D: 3.1…
  • Page 130
    5302 R RYSTAR EFERENCE MANUAL Record the low, mid and high density levels on Chart 1 (‘Drystar 5302 Determination of Operating Levels’). Refer to ‘Quality Control Charts’ page 211. Press the Confirm key to return to the main menu. Repeat step…
  • Page 131
    We strongly recommend using a 30 cm (12-inch) machinist scale with 0.5 mm divisions (1/64 inch). Record these values as reference dimensions A on Chart 4 (‘Drystar 5302 Geometric Consistency Control Chart’). Refer to ‘Quality Control Charts’ on page 211.
  • Page 132
    126) and the upper circle (refer to item 2 on the ‘QC test image’ on page 126). Record these values at the top of Chart 3 (‘Drystar 5302 Artifacts and Spatial Resolution Control Chart’). Refer to ‘Quality Control Charts’ on page 211.
  • Page 133
    Performing the daily QC test This test must be performed every day before any clinical film can be processed. Turn on the Drystar 5302 and wait at least for 15 minutes. Refer to ‘Switching on the Drystar 5302’ on page 32.
  • Page 134
    (Densitometer=MB924) Record the low, mid and high density values on Charts 2A and 2B (‘Drystar 5302 Daily Density Control Chart’). Also record the date and time of the test on the charts and on the QC test images. Refer to ‘Quality Control…
  • Page 135
    2 on the ‘QC test image’ on page 126). Record these values on Chart 3 (‘Drystar 5302 Artifacts and Spatial Resolution Control Chart’). In case of significant artifacts, insufficient spatial resolution or failure of any other recommended QC tests, the cause of the problem must be identified, and corrective action must be taken before the Drystar 5302 can be used for any further clinical imaging.
  • Page 136
    We strongly recommend using a 30 cm (12-inch) machinist scale with 0.5 mm divisions (1/64 inch). Record these values as measured dimensions A and B on Chart 4 (‘Drystar 5302 Geometric Consistency Control Chart’). Compare the measured A and B dimensions with the reference dimension…

  • Page 137: Installation

    5302 R RYSTAR EFERENCE MANUAL Installation Two installation operations are possible: • install new software, or upgrade existing software from a CF-card, • perform a complete installation procedure, using the printer installation wizard. Installing new or upgrading existing software It is possible to install new software or new software components. Different software (components) can be installed: •…

  • Page 138
    5302 R RYSTAR EFERENCE MANUAL Press the Confirm key to select ‘Installation from CF-card’. Before the procedure starts, the system suggests you make a back-up copy of the current configuration. It is highly recommended to do this, so you can always restore it in case something should go wrong.
  • Page 139
    5302 R RYSTAR EFERENCE MANUAL Press the up/down arrow keys to select the desired save set file, followed by the Confirm key. The following confirmation screen is displayed: <Dataset def v1.00> Press the Confirm key (YES) to proceed with the selected file, or the Escape key (NO) to quit the procedure without any changes.
  • Page 140
    5302 R RYSTAR EFERENCE MANUAL Using the installation wizard When you install the Drystar 5302, the installation wizard will guide you through the complete installation procedure. The installation wizard consists of three steps: • ‘Entering the printer network settings’ (page 142), •…
  • Page 141
    5302 R RYSTAR EFERENCE MANUAL Press the up/down arrow keys to select the desired language. Press the Confirm key to store the data, or the Escape key to quit the procedure without any changes. The ‘Date’ screen is displayed: Press the up/down arrow keys to increment/decrement the numbers or the month.
  • Page 142
    5302 R RYSTAR EFERENCE MANUAL Press the Confirm key to continue. A screen with information on the sequence of the steps will appear: settings 2.Host specific settings 3.Save configuration Press the Confirm key to start with step 1 or press the Escape key to quit the procedure.
  • Page 143
    5302 R RYSTAR EFERENCE MANUAL Press the up/down arrow keys to increment/decrement the numbers. Press the left/right arrow keys to move through the fields. Press the Confirm key to store the data. Refer to ‘Data entry’ on page 31. Note that blank spaces will be ignored (see examples below). Example 1: if the IP address is 120.000.120.120, then the data entry should be as follows: Example 2: if the IP address is 120.0.120.120, then the data entry should be as…
  • Page 144
    5302 R RYSTAR EFERENCE MANUAL Press the Confirm key to store the data, or the Escape key to quit the procedure without any changes. The ‘Router IP address’ screen is displayed: 120.120.120.120 If the Router IP address has already been assigned, it will be shown on the display. Enter the Router IP address by means of the arrow keys.
  • Page 145
    Press the Escape key to exit the wizard on the local keypad. Refer to ‘Controlling the Drystar 5302 via a remote PC (with browser)’ on page 151. If you wish to continue with the installation wizard from the local keypad, press the Confirm key to continue.
  • Page 146
    5302 R RYSTAR EFERENCE MANUAL Entering modality specific settings An instruction screen shows the information you need to complete this part of the installation: name -Modality brand -Modality type -Modality AE-title ——————— ask your network administrator for this information. Press the Confirm key to continue or press the Escape key to skip this step. The ‘Enter daily used Modality name’…
  • Page 147
    5302 R RYSTAR EFERENCE MANUAL Press the Confirm key to store the data, or the Escape key to quit the procedure without any changes. The ‘Select modality type’ screen is displayed: 2 MXVIEW 3 MX800 Press the up/down arrow keys to select the appropriate modality type. Press the Confirm key to store the data, or the Escape key to quit the procedure without any changes.
  • Page 148
    5302 R RYSTAR EFERENCE MANUAL Press the Confirm key to store the data, or the Escape key to quit the procedure without any changes. A screen summarizing the information you have entered will appear: Following data CTscanner Brand name: Philips Modality type: MXVIEW Modality AE-title:…

  • Page 149: Saving The Configuration

    5302 R RYSTAR EFERENCE MANUAL Saving the configuration You need to complete this step, otherwise all the install data you have entered will be lost! The printer settings are saved automatically to the hard disk. When 100% is reached, the following ‘Save configuration’ screen will ask you to insert the back-up CF-card: Insert a CF-card.

  • Page 150
    5302 R RYSTAR EFERENCE MANUAL Label the CF-card with the BAC_<save_set_name> and press the Confirm key. The installation is now finished, and the following screen is displayed: CALIBRATION Option for further actions and to fill in the SITE-SPECIFIC DATA Press the Confirm key to accept the installation or press the Escape key to redo the installation.

  • Page 151: Chapter 4: Controlling The Drystar 5302 Via A Remote Pc (With Browser)

    Controlling the Drystar 5302 via a remote (with browser) This chapter will inform you on how to control the functions of the Drystar 5302 via the browser on a remote PC. Features Setup Setting up the connection Starting the remote session…

  • Page 152: Features

    A network adapter, • A cross-link Ethernet cable (for a direct link between PC and Drystar 5302) or a straight Ethernet cable (for a connection via an existing network). Using the remote PC, you have access to five operating modes of the Drystar 5302: Operator mode, Key-operator mode, Service mode, Specialist mode, and Administrator (Security).

  • Page 153: Setup

    5302 R RYSTAR EFERENCE MANUAL Setup The Drystar 5302 and the PC with browser can be set up in two ways: • using a crossed network cable, or • using a straight network cable. Configuration with crossed network cable In this configuration, a crossed network UTP cable is used to connect the service PC directly to the printer.

  • Page 154
    5302 R RYSTAR EFERENCE MANUAL Configuration with straight network cable In this configuration, the PC is connected to the network with a straight network cable. Controlling the Drystar 5302 via a remote PC (with browser) 2830A EN 20050526…

  • Page 155: Setting Up The Connection

    Attributing a fixed IP address to the PC Go to Settings via the Start menu of Windows and click Control Panel. The Control Panel menu will appear. 2830A EN 20050526 Controlling the Drystar 5302 via a remote PC (with browser)

  • Page 156
    5302 R RYSTAR EFERENCE MANUAL In the Control Panel menu, double-click Network. In the Network window, select TCP/IP Protocol, select the Protocols tab, and click Properties. Controlling the Drystar 5302 via a remote PC (with browser) 2830A EN 20050526…
  • Page 157
    255.255.0.0. Switching off the proxy settings of the browser Open the browser. In the Tools menu, click Internet Options. The Internet Options window will appear. 2830A EN 20050526 Controlling the Drystar 5302 via a remote PC (with browser)
  • Page 158
    Switch off all proxy settings of the browser and click OK. The PC is ready to make a connection. Refer to ‘Starting the remote session’ on page for more information. Controlling the Drystar 5302 via a remote PC (with browser) 2830A EN 20050526…
  • Page 159
    IP address to the PC’ on page 155. The PC is ready to make a connection. Refer to ‘Starting the remote session’ page for more information. 2830A EN 20050526 Controlling the Drystar 5302 via a remote PC (with browser)

  • Page 160: Starting The Remote Session

    Starting the remote session When starting the remote session, make sure the printer is in ‘Ready’ mode. To start the remote session, enter the Drystar 5302 IP address in the Address bar of the browser. The Browser welcome page appears: There are five access levels: Operator, Key-operator, Service Engineer, Specialist and Security (also know as administrator).

  • Page 161
    • Password: 5302 You now have access to the Drystar 5302 functions in the key-operator mode. Only one session is active at one time on one printer. Mostly, the menu structure and the browser screens are structured in the same way as the local display of the printer.
  • Page 162
    • save and restore configuration datasets on/from the remote PC. Do not use the Back and Forward buttons of your browser. Use the links included in the web pages instead. Controlling the Drystar 5302 via a remote PC (with browser) 2830A EN 20050526…

  • Page 163: Chapter 5: System Description

    Chapter System description In this informative chapter you will find mechanical and functional descriptions. Main components Functional description Changing the film format of the trays Drystar 5302 network configuration Transport after installation…

  • Page 164: Main Components

    5302 R RYSTAR EFERENCE MANUAL Main components Front view Top cover Output tray User interface (refer to page 22) Input tray Rear view CF-card slot Network RS-232 =>Service PC Power connection System description 2830A EN 20050526…

  • Page 165: Functional Description

    5302 R RYSTAR EFERENCE MANUAL Functional description The Drystar 5302 consists of two functional blocks: a controller and a print engine. The controller • captures the incoming digital data and stores the image, • composes the different images, and •…

  • Page 166: Changing The Film Format Of The Trays

    5302 R RYSTAR EFERENCE MANUAL Changing the film format of the trays The key-operator can adjust the film size setting of both input trays (8×10” up to 14×17” film sizes). First, the key-operator has to perform a mechanical modification. After this modification, the ‘film format’…

  • Page 167
    5302 R RYSTAR EFERENCE MANUAL Remove the film position tab. Locate the correct tab position for the desired film format. 17″ 14″ 12″ 11″ 8″ 10″ 14″ 2830A EN 20050526 System description…
  • Page 168
    5302 R RYSTAR EFERENCE MANUAL Put the film position tab in place and push it down until it locks. Load a new film pack. Refer to ‘Loading films’ on page 44. System description 2830A EN 20050526…

  • Page 169: Drystar 5302 Network Configuration

    EFERENCE MANUAL Drystar 5302 network configuration The Drystar 5302 is a standard network printer. This means that you can just plug it into the (existing) ethernet network without any additional options or accessories. Drystar 5302 is also a native DICOM printer. Therefore the…

  • Page 170: Transport After Installation

    5302 R RYSTAR EFERENCE MANUAL Transport after installation The Drystar 5302 is quite compact, so moving the printer over a short distance — if required — can be done in a convenient way. Refer to ‘Safety precautions’ on page 11.

  • Page 171: Chapter 6: Preventive Maintenance

    Chapter Preventive maintenance This chapter guides the user through maintenance and cleaning tasks which require no special skills, tools nor training: Preventive maintenance schedule Cleaning the exterior…

  • Page 172: Preventive Maintenance Schedule

    Do not touch the resistor line of the print head. • Always switch off the Drystar 5302 and disconnect the power cord from the outlet before carrying out any maintenance work inside the printer. Film jam removal or cleaning the printer head can be done without switching the power off.

  • Page 173: Cleaning The Exterior

    5302 R RYSTAR EFERENCE MANUAL Cleaning the exterior Switch off the Drystar 5302 by following the procedure as described in ‘Switching off the Drystar 5302’ on page 34. Remove the power plug from the socket. Wipe the exterior of the printer with a clean, soft, damp cloth.

  • Page 174
    5302 R RYSTAR EFERENCE MANUAL Preventive maintenance 2830A EN 20050526…

  • Page 175: Chapter 7: Troubleshooting

    Troubleshooting This chapter serves as a guide to identify and solve possible problems you may encounter. Troubleshooting checklist The Drystar 5302 does not print Clearing of film jams Film identification problems Start-up errors Maintaining image quality and resolving image qual-…

  • Page 176: Troubleshooting Checklist

    RYSTAR EFERENCE MANUAL Troubleshooting checklist The table below lists some general problems, which can occur when working with the Drystar 5302. • The Drystar 5302 does not print. Action Refer to Page ‘Checking the status indicator LED’ ‘Checking the connections’…

  • Page 177
    5302 R RYSTAR EFERENCE MANUAL Checking the status indicator LED The LED on the front panel indicates the Drystar 5302 operating status. Use the following table to determine the status of your printer. Receive Printing Colour Light Status Action jobs? Ready (stand-by) Proceed.

  • Page 178: The Drystar 5302 Does Not Print

    5302 R RYSTAR EFERENCE MANUAL The Drystar 5302 does not print Reset of the printer The Power/Reset button restarts the printer after a software failure or an error. Refer to on page ‘Switching off the Drystar 5302’ Checking the connections Regularly check all electrical connections.

  • Page 179
    EFERENCE MANUAL Checking error messages If the Drystar 5302 is not printing your job, you should check the front panel display to see if the Drystar 5302 is indicating an error status. The operator is notified of the situation by means of an error screen and a beep.
  • Page 180
    5302 R RYSTAR EFERENCE MANUAL Checking the print queue If no error message is displayed, you should check the print queue: Mod.name The status can be: • printing (PR), • calculating (CA). A warning status, indicated by a blinking “W” in the upper right corner of the display, indicates that there is a problem that should be attended to.

  • Page 181: Clearing Of Film Jams

    5302 R RYSTAR EFERENCE MANUAL Clearing of film jams A film jam can be situated either: • In the input tray section. Refer to ‘Film input tray jams’ on page 182. • In the top section. Refer to ‘Film transport jams (clearing from the top)’ page 185.

  • Page 182
    EFERENCE MANUAL Film input tray jams A film jam in the input tray can occur when the Drystar 5302 is opened while a film is currently printed, or when an individual film is incorrectly inserted in the input tray. Refer also to ‘Film identification problems’…
  • Page 183
    5302 R RYSTAR EFERENCE MANUAL To get a clear view, it may be necessary to remove any remaining film sheets, including the protective (white) sheet. Check if the film feed section of the input tray is clear. 2830A EN 20050526 Troubleshooting…
  • Page 184
    5302 R RYSTAR EFERENCE MANUAL Reposition the film stack in the film tray, making sure that all the sheets are kept correctly in place (refer to ‘Loading films’ on page 44). Close the film input tray. Troubleshooting 2830A EN 20050526…
  • Page 185
    5302 R RYSTAR EFERENCE MANUAL Film transport jams (clearing from the top) The following screen indicates that a jam occurred in the upper section of the film transport system. Blinking To remove a jammed film in the transport system: Please note that instructions for removing a film jam in the transport section are present on a sticker at the inside of the top cover.
  • Page 186
    5302 R RYSTAR EFERENCE MANUAL Open the print head unit. The print head unit can be warm. Gently remove the film sheet(s). Never use force to clear the jammed film. If it is not possible to gently remove the jammed film by pressing the transport buttons, proceed with the procedure as follows.
  • Page 187
    Press the Confirm key to continue. Make sure to follow carefully the procedures as described in this manual before attempting to open the printer. Refer to ‘Switching off the Drystar 5302’ on page 34. Refer to ‘Loading films’ on page 44.

  • Page 188: Film Identification Problems

    Overrule the Film Identification tag of the film pack To reload the current or another film pack In case the Drystar 5302 does not start printing after re-inserting a film pack, first check if this film pack is inserted correctly.

  • Page 189
    Only your local service organization has the possibility to enable the “Overrule RF- tag Reading” setting! In case the Drystar 5302 does not start printing after inserting a new film pack, check if this film pack is inserted correctly. If the film pack is inserted correctly and the Drystar 5302 does not resume printing,…
  • Page 190
    5302 R RYSTAR EFERENCE MANUAL Press the Confirm button. • If the “Overrule RF-tag Reading” Setting is active, the following message is displayed: OVERRULE IDENTIFICATION CODE IS ACTIVE Dmax is limited due to safety reasons • If the “Overrule RF-tag Reading” Setting is not activated, the following message will be displayed: Re-enable printing by inserting correct…
  • Page 191
    5302 R RYSTAR EFERENCE MANUAL Film overrun from current pack The following message is presented when more than 110 copies are printed from the current film pack: THIS PACK. please insert other film pack. Reload a new film pack to resolve this problem. 2830A EN 20050526 Troubleshooting…

  • Page 192: Error Messages During Printer Start-Up

    ‘Checking error messages’ on page 179. After starting up the Drystar 5302, the printer performs a self-test. A progress indicator will show the proceeding of this self-test. During the self-test, a number of messages can appear, meaning that the self-test has failed.

  • Page 193
    5302 R RYSTAR EFERENCE MANUAL System self test failed In case the system self test failed, following message appears: ERROR System failure Software self test failed In case the software selftest has failed, following message appears: 2830A EN 20050526 Troubleshooting…

  • Page 194: Maintaining Image Quality And Resolving Image Quality Problems

    • After the replacement of a thermal head, • When loading new films into the input tray. Overview of calibration functions Two calibration functions are provided for the Drystar 5302. Calibration Purpose When? • To measure and set the system density of the •…

  • Page 195
    5302 R RYSTAR EFERENCE MANUAL Understanding the calibration policy You should regularly perform a film calibration to assure an optimal image quality. Film calibration can be initiated in 2 ways: • Automatically, i.e. after printing every ‘x’ new film packs (frequency is adjustable), •…
  • Page 196
    5302 R RYSTAR EFERENCE MANUAL Persistent white dots or lines appear in the transport direction If fine white dots and one or more fine white lines appear in the transport direction (mostly due to dust infiltration), try the following remedies: Clean the print head resistor line.

  • Page 197: Warning Messages

    <explanatory text> Press the Confirm key to acknowledge the new warning condition. As long as the warning condition has not been resolved, the other Drystar 5302 screens (except the Key-operator screens) will show a ‘W’ character blinking in the upper right corner (e.g. the Operator menu screen): ‘W’…

  • Page 198: Maintenance Messages

    <explanatory text> Press the Confirm key to acknowledge the new maintenance condition. As long as the maintenance action has not been executed, the other Drystar 5302 screens (except the Key-operator screens) will show a ‘M’ character blinking in the upper right corner (e.g. the Operator menu screen): ‘M’…

  • Page 199: Appendix A: Equipment Information Sheet

    Appendix Equipment information sheet…

  • Page 200: Specifications

    5302 R RYSTAR EFERENCE MANUAL Specifications Product description Type of product Printer Commercial name Drystar 5302 Original seller/manufacturer Agfa-Gevaert N.V. Labelling TÜV-, cULus-Certification Mark, CE-marking CCC Mark Dimensions • Unpacked: width 72.8, length 71.5, height 67.6 Dimensions (approx. values in cm) •…

  • Page 201
    5302 R RYSTAR EFERENCE MANUAL Network connectivity RJ45 twisted pair for 10/100Base-TX; Ethernet / connectors Serial RS232 connection Network protocols (TCP/IP services) FTP, Telnet, HTTP DICOM (Default) Image formats TIFF Postscript Not available Power consumption — heat dissipation During operation 250 W — 900 kJ/h In stand-by 70 W — 252 kJ/h…
  • Page 202
    Print technology Direct thermal printing Reliability Estimated product life (if regularly serviced and maintained > 5 years according to Agfa instructions) Service interventions Max. 2 interventions / 3 years Earthquake (standard) Meets the CA requirements Equipment information sheet 2830A EN 20050526…
  • Page 203
    5302 R RYSTAR EFERENCE MANUAL Imaging Array — Diagnostic area 8×10” 8” dimensions 10” dimensions pixels pixels 2376 188.65 3070 243.76 10×12” 10” dimensions 12” dimensions pixels pixels 3070 243.76 3653 290.05 11×14” 11” dimensions 14” dimensions pixels pixels 3348 265.83 4358 346.03…

  • Page 204: Viewing The System Info Area On A Film

    The System info area contains info about: • Printer: (serial number, densitometer info, film counts, software version, etc.), • Controller (image source, date, time, etc.). For more detailed information, refer to the Drystar 5302 Service documentation. Equipment information sheet 2830A EN 20050526…

  • Page 205: Options And Accessories

    5302 R RYSTAR EFERENCE MANUAL Options and accessories Mobile / Earthquake provisions Not available. 2830A EN 20050526 Equipment information sheet…

  • Page 206: Connectivity

    Drystar 5302 is a Dicom printer and can therefore be connected to all modalities supporting Dicom. Although, to ensure optimal operation and image quality, Agfa has made the effort to test and release the Drystar 5302 with most of modalities on the market. For the complete list or if you want to check on a specific modality, contact your Agfa representative.

  • Page 207: Appendix B: Drystar Media Density Response Data

    Appendix Drystar media density response data…

  • Page 208: Drystar Dt 2B

    5302 R RYSTAR EFERENCE MANUAL Drystar DT 2B MacBeth Gretag X-rite X-rite X-rite X-rite dens. TR-924 D200-2 0.22 0.16 0.18 0.23 0.19 0.19 0.45 0.47 0.52 0.48 0.48 0.78 0.73 0.75 0.80 0.76 0.76 1.06 1.02 1.03 1.09 1.05 1.04 1.35 1.30 1.31…

  • Page 209: Drystar Dt 2C

    5302 R RYSTAR EFERENCE MANUAL Drystar DT 2C MacBeth Gretag X-rite X-rite X-rite X-rite dens. TR-924 D200-2 0.10 0.08 0.07 0.09 0.08 0.07 0.38 0.37 0.36 0.38 0.38 0.38 0.65 0.64 0.64 0.66 0.65 0.65 0.94 0.93 0.92 0.95 0.93 0.93 1.21 1.20…

  • Page 210
    5302 R RYSTAR EFERENCE MANUAL Drystar media density response data 2830A EN 20050526…
  • Page 211
    Appendix Quality Control Charts…
  • Page 212
    5302 R RYSTAR EFERENCE MANUAL Chart 1 Drystar 5302: Determination of Operating Levels Imager Type: __________ Serial #: _________________ Date ____________________ Film Type: ____________ Emulsion #: ______________ Densitometer: _________________ (default selection) Step 1: Print QC Test images on five consecutive days. Record the optical densities measurements in the tables below.
  • Page 213
    5302 R RYSTAR EFERENCE MANUAL Chart 2A Drystar 5302 Daily Density Control Chart Imager Type: __________ Serial #: _____________ Film Type:____________ Emul #:___________ Densitometer: ____________________ (default selection) Da te : Initia ls: Upper Control limit = +0.05 Calculated Reference Low Density Level…
  • Page 214
    5302 R RYSTAR EFERENCE MANUAL Chart 2B Drystar 5302 Daily Density Control Chart Imager Type: __________ Serial #: _____________ Film Type:____________ Emul #:___________ Densitometer: ____________________ (default selection) High Density Upper Control limit = +0.20 Calculated Reference High Density Level Lower Control Limit = -0.20…
  • Page 215
    5302 R RYSTAR EFERENCE MANUAL Chart 3 Drystar 5302 Artifacts and Spatial Resolution Control Chart Test Frequency: Weekly Drystar 5302 Serial # _____________ Initial Reference Test Date Initial Reference Artifacts Initial Reference Dot Visibility Initial Reference Low Contrast Month Artifacts…
  • Page 216
    5302 R RYSTAR EFERENCE MANUAL Chart 4 Drystar 5302 Geometric Consistency Control Chart Test Frequency: Annually or as required Drystar 5302 Serial # ______________ Reference Dimensions Measured Dimensions Consistency Aspect Ratio Date: Date: Reference Dimensions Measured Dimensions Consistency Aspect Ratio…
  • Page 217
    Appendix Index…
  • Page 218
    DT 2B Configuration with crossed network ………153 ……….209 cable DT 2C Configuration with straight network ………154 cable Control Drystar 5302 via browser ……….151 Earthquake provisions ….. 205 …..161 Enter key-operator level Environmental conditions ….161 Enter operator level Operation ……..
  • Page 219
    5302 R RYSTAR EFERENCE MANUAL ……..44 ..81 Load new Change Printer IP address ….. 22 ..84 Output tray location Change Router IP address Quality problems of printed films Solve white dots or lines problems ……….196 ……..181 …….
  • Page 220
    5302 R RYSTAR EFERENCE MANUAL ……..85 ..194 Remove Quality problems of printed films ……83 Netmask, change Remote PC Configuration with crossed network ……..153 cable Configuration with straight network Operator cable ……..154 ……..30 Main screen ….107 Restoring settings, printer ……….19 Mode…
  • Page 221
    Description ……..23 Location ……..22 Switch off ……. 34 Drystar 5302 ……157 Proxy settings ….. 32 Switch on Drystar 5302 ……204 System info area Transport after installation ….170 Tray ……..42 Input tray ….176 Troubleshooting checklist TÜV label. See Labels Upgrading software ……
  • Page 222
    Printed in Belgium Published by Agfa-Gevaert N.V., B-2640 Mortsel-Belgium 2830A EN 20050526…
Источник

AGFA Drystar 5302 Reference Manual

  1. Manuals
  2. Brands
  3. AGFA Manuals
  4. Printer
  5. Drystar 5302
  6. Reference manual

  • Contents

  • Table of Contents

  • Troubleshooting

  • Bookmarks

Related Manuals for AGFA Drystar 5302

Summary of Contents for AGFA Drystar 5302

  • Page 1
    Drystar 5302 Reference manual…
  • Page 2
    Agfa-Gevaert N.V. shall under no circumstances be liable for any damage arising from the use or inability to use any information, apparatus, method or process disclosed in this document.

  • Page 3: Table Of Contents

    ………………17 Operating modes ………………19 Control modes (local and remote) …………… 21 The local user interface …………….22 Switching on the Drystar 5302 …………..32 Switching off the Drystar 5302 …………..34 Chapter 2: Basic operation (Operator mode) ……….35 Overview of operator functions …………..36…

  • Page 4
    5302 R RYSTAR EFERENCE MANUAL Chapter 4: Controlling the Drystar 5302 via a remote PC (with browser) ………………….151 Features …………………. 152 Setup ………………….153 Setting up the connection …………….155 Starting the remote session ……………. 160 Chapter 5: System description …………..
  • Page 5
    5302 R RYSTAR EFERENCE MANUAL Appendix C: Quality Control Charts …………211 Appendix D: Index ………………217 2830A EN 20050526…
  • Page 6
    5302 R RYSTAR EFERENCE MANUAL 2830A EN 20050526…

  • Page 7: Chapter 1: Introducing The Drystar 5302

    Chapter Introducing the Drystar 5302 This chapter introduces the Drystar 5302 to the user and draws attention to important safety precautions. Drystar 5302 features Safety precautions Security precautions Safety compliance Privacy and security Operating modes Control modes (local and remote)

  • Page 8: Drystar 5302 Features

    Any combination of two film formats can be used “online”. Both input trays can be adjusted for all film formats. The input trays of the Drystar 5302 are equipped with an RF-tag reader, which automatically traces the films used in the printer and protects the printer when detecting non-identified media.

  • Page 9
    RYSTAR EFERENCE MANUAL Number of output trays. The Drystar 5302 is equipped with 1 output tray, which is suitable for the multiple formats without any adjustment. Integrated A#sharp technology A#sharp is a technology that enhances image sharpness for the Drystar 5302.
  • Page 10
    Agfa representative. The functionality of the Drystar 5302 is completely controlled via the network. You can control the working of the Drystar 5302 via the local keypad or via a remote PC with a functioning web browser. Customizable features Consumables.

  • Page 11: Safety Precautions

    EFERENCE MANUAL Safety precautions The Drystar 5302 must only be operated according to its specifications and its intended use. Any operation not corresponding to the specifications or intended use may result in hazards, which in turn may lead to serious injuries or fatal accidents (for example electric shocks).

  • Page 12
    In order to reduce the risk of electric shock, do not remove any covers. Type B equipment: Indicates that the Drystar 5302 complies with the limits for type B equipment. Supplementary protective earth connector: Provides a connection between the Drystar 5302 and the potential equalization bus bar of the electrical system as found in medical environments.
  • Page 13
    EFERENCE MANUAL Transport after installation Before moving the printer, always switch off the machine. The Drystar 5302 should be transported by 3 persons or if not possible with 2. Refer to the Installation manual for more information. When doing this, the stability and the structure of the tabletop have to be taken into account.

  • Page 14: Security Precautions

    CAUTION (U.S.A. only): In accordance with U.S. Law, this device can only be sold to or ordered by a licensed physician. Printed images should be treated as patient records and should only be viewed by authorized personnel. Introducing the Drystar 5302 2830A EN 20050526…

  • Page 15: Safety Compliance

    EC: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Compliances The Drystar 5302 has been tested and found to comply with the following international standards and regulations: • the Medical Devices Directive 93/42/EEC •…

  • Page 16
    • GB17625.1-2003 (for CCC-Mark) Seismic (earthquake) requirements The printer meets the CA (Californian) requirements. Labels The Drystar 5302 carries the CE, TÜV, cULus and CCC labels. CCC label CE, TÜV and cULus label Introducing the Drystar 5302 2830A EN 20050526…

  • Page 17: Privacy And Security

    Insurance Portability and Accountability Act) and to meet the IHE standards (Integrated Healthcare Enterprise) some security features are included in the user interface of the Drystar 5302 (available via the web pages only: under ‘Security tools’. Refer to the chapter ‘Controlling the Drystar 5302 via a remote…

  • Page 18
    ‘communication allowed’ table. A Certification Authority (CA) is responsible for creating a certificate. The CA can be the hospital, Agfa or a third party. This CA distributes the certificate to the hospital security responsible or service technician, who for his part: •…

  • Page 19: Operating Modes

    5302 R RYSTAR EFERENCE MANUAL Operating modes The Drystar 5302 can be operated in five modes: Operator mode, Key- operator mode, Service mode, Specialist mode and Administrator mode. Operator mode The Operator mode groups all basic functions that are intended for radiographers without special technical skills: •…

  • Page 20
    Specialist mode The specialist mode functions are reserved for trained service personnel of the Agfa Customer Support Center. The specialist mode is password protected and is only accessible by browser via a remote PC. Administrator mode (also known as Security) The Administrator mode functions are reserved for the System Administrator.

  • Page 21: Control Modes (Local And Remote)

    RYSTAR EFERENCE MANUAL Control modes (local and remote) You can control the working of the Drystar 5302 via the local keypad or via a networked remote PC. The table below gives an overview of the operating modes you can access locally and/or via the remote PC.

  • Page 22: The Local User Interface

    Power/Reset button Display Keypad Status indicator LED Film input trays Film output tray Never try to open the printer when the Drystar 5302 is printing a film. Always follow the instructions on the display! Introducing the Drystar 5302 2830A EN 20050526…

  • Page 23
    • To reset the printer. Do NOT press the Power/Reset button without first following the procedure to stop printing when the Drystar 5302 is printing a film. Refer ‘Switching off the Drystar 5302’ on page 34. 2830A EN 20050526…

  • Page 24: Rear Panel

    Network • To connect to the hospital network. connector Input/output • To connect a terminal PC (used by the Service connector engineer). Power connector • To connect the printer power cord. Introducing the Drystar 5302 2830A EN 20050526…

  • Page 25
    5302 R RYSTAR EFERENCE MANUAL Working with Compact flash cards (CF-card) The Drystar 5302 is equipped with an external CF-card slot, which is located at the rear side. Inserting a CF-card To insert a CF-card in the Drystar 5302: Hold the CF-card vertically with the connector holes in front of the slot and with the flat surface pointing to the left.
  • Page 26
    5302 R RYSTAR EFERENCE MANUAL Removing a CF-card To remove a CF-card from the Drystar 5302 slot: Push the unlocking lever underneath the CF-card slot. The CF-card is pushed slightly outward. Remove the CF-card gently from the slot. Introducing the Drystar 5302…

  • Page 27: The Keypad

    RYSTAR EFERENCE MANUAL Audio signals The Drystar 5302 gives status information via beeps. The length of the beep indicates the response of the system to a key command. • A short beep means that Drystar 5302 has accepted the key command and is starting the operation.

  • Page 28
    5302 R RYSTAR EFERENCE MANUAL The Drystar 5302 keypad features the following keys: To access the advanced functions of the key- Key- operator mode. Refer to the chapter ‘Advanced operator key operation (Key-operator mode)’. To quit the current function or exit a menu without Escape key saving modifications.

  • Page 29: The Display

    5302 R RYSTAR EFERENCE MANUAL The display The Drystar 5302 control panel has a backlit LCD display. We distinguish two panel types depending on the selected language: • a backlit LCD display with 4 lines for Western languages (e.g. Dutch, French, Portuguese, Swedish, …).

  • Page 30
    In operator mode, appropriate information is displayed in accordance with the status of the printer. The operator basic screen looks as follows, indicating that the Drystar 5302 is ready for operation and that no job is currently being executed. When the printer is busy with at least one print job, the print queue screen is displayed: Mod.name…

  • Page 31: Data Entry

    To accept an entry in a menu, press the Confirm key. • A short beep acknowledges and terminates the entry. • The Drystar 5302 will sound a long beep if you press a key that is not to be used at that moment. 2830A EN 20050526 Introducing the Drystar 5302…

  • Page 32: Switching On The Drystar 5302

    ‘Safety precautions’ on page 11. Follow the procedure below to ensure proper start-up of the Drystar 5302 and to check that everything is working correctly. Check that the power cord is plugged in and then switch on the printer by pressing the Power/Reset button.

  • Page 33
    If, on the front panel display, the READY message is shown, the status indicator LED is constantly green. It takes 10 minutes (starting up of the Drystar 5302 and heating up of the thermal print head) before you can start printing. The display will inform you that the printer is warming up: •…

  • Page 34: Switching Off The Drystar 5302

    Queued print jobs will be stored on the hard disk and will be resumed next time the printer is switched on. Press the Power/Reset button to switch off the Drystar 5302. • If the printer is printing, it will finish that print job: •…

  • Page 35: Chapter 2: Basic Operation (Operator Mode)

    This chapter will inform on how to manage the print queue, how to print films with priority and how to load new films. Overview of operator functions Managing the print queue Pausing the print queue Viewing the film count info Viewing the printer status About Drystar 5302 consumables Loading films…

  • Page 36: Overview Of Operator Functions

    RYSTAR EFERENCE MANUAL Overview of operator functions This section focuses on the basic operating principles of the Drystar 5302. After reading this chapter, the operator should be able to produce diagnostic usable hardcopies. No special technical skills are required. All basic operator functions can be activated directly by pressing a single key on the keypad.

  • Page 37: Managing The Print Queue

    Drystar 5302. Refer to the User manual of the acquisition modality for more information.

  • Page 38
    5302 R RYSTAR EFERENCE MANUAL A description of the possible status of the jobs is listed in the table below: Status Description Printing Printing of this job is in progress. The necessary calculations are already being Calculating made before printing of the job can be started. Waiting Jobs are queued in the printer memory.

  • Page 39: Pausing The Print Queue

    RYSTAR EFERENCE MANUAL Pausing the print queue When the Drystar 5302 is printing, you can always pause the print queue by entering the operator menu. To pause the print queue, proceed as follows: During a print job, the ‘print’ screen is displayed: Mod.name…

  • Page 40: Viewing The Film Count Info

    EFERENCE MANUAL Viewing the film count info When the Drystar 5302 is printing, you can always view the number of films left in the trays by entering the operator menu. Do not open the input trays to view the number of loaded films while the…

  • Page 41: Viewing The Printer Status

    RYSTAR EFERENCE MANUAL Viewing the printer status When the Drystar 5302 is printing, you can always view the printer status by entering the operator menu. To view the printer status, proceed as follows: During a print job, the ‘print’ screen is displayed: Mod.name…

  • Page 42: About Drystar 5302 Consumables

    RYSTAR EFERENCE MANUAL About Drystar 5302 consumables The Drystar 5302 can handle blue-transparent (Drystar DT 2B) and clear- transparent (Drystar DT 2C) films. Available film formats are 8×10”, 10×12”, 11×14”, 14×14” and 14×17”. The printer has 2 input trays. Both trays can handle all listed film types and formats.

  • Page 43
    5302 R RYSTAR EFERENCE MANUAL Appropriate labels have been applied on the input tray(s) by the service personnel at installation of the printer, indicating the type of new film to be loaded when the tray is empty. 2830A EN 20050526 Basic operation (Operator mode)

  • Page 44: Loading Films

    The Drystar 5302 can be loaded with 8×10”, 10×12”, 11×14”, 14×14” and 14×17” films. The Drystar 5302 can be loaded with new films in full daylight. Loading films is easy and can be done very quickly. Follow the procedures as described in this section.

  • Page 45
    Load a new film pack. Refer to ‘Film loading procedure’ on page 46. When the Drystar 5302 is in the ready state and an input tray is empty: The display shows the following message: Blinking Open the lower input tray.
  • Page 46
    5302 R RYSTAR EFERENCE MANUAL Film loading procedure Open the empty input tray. To avoid possible film jams, make sure to open input tray all the way. The printer is ready to receive a new film when the following message appears: Basic operation (Operator mode) 2830A EN 20050526…
  • Page 47
    5302 R RYSTAR EFERENCE MANUAL Remove the white (protective) film sheet. Take film pack, and open it. Verify that the film type on the film pack corresponds with the sticker on the tray! If you do use an other film type, you are advised to change the label on the tray. You can put the film pack onto a table to make manipulation easier.
  • Page 48
    5302 R RYSTAR EFERENCE MANUAL Remove the plastic film bag partially. Slide the film pack into the input tray, and remove the plastic film bag completely. Basic operation (Operator mode) 2830A EN 20050526…
  • Page 49
    ‘Clearing of film jams’ on page 181. The Drystar 5302 resumes printing as soon as the tray is closed. Loading instructions are also available on the input tray cover. When a film job cannot be done because the tray to which the job is assigned is empty, then the printer will check if the films in the other tray can be used for this and other print jobs in the print queue.
  • Page 50
    5302 R RYSTAR EFERENCE MANUAL Checking the correct position of a film in the input tray You can verify that the film is properly loaded by watching the lower right corner of the films in the input tray. The rounding of this corner should be smaller than the other three corners.

  • Page 51: Chapter 3: Advanced Operation (Key-Operator Mode)

    Chapter Advanced operation (Key-operator mode) This chapter gives an overview of functions for the advanced user: Overview of key-operator functions Viewing printer information Changing the configuration settings Printing images Saving the configuration settings Restoring the configuration settings Performing the calibration procedures Cleaning the print head Service actions Quality Control…

  • Page 52: Overview Of Key-Operator Functions

    EFERENCE MANUAL Overview of key-operator functions The key-operator menus make it possible to use the Drystar 5302 advanced functions. For general information on the key functions of the Drystar 5302, refer to ‘The local user interface’ on page 22. Overview…

  • Page 53: General

    5302 R RYSTAR EFERENCE MANUAL The menu structure General Show settings General Other… Upper input tray Lower input tray Time and date Network(DICOM) Language Image quality Beep on empty tray Logical printers Installed datasets General Change settings Film view Upper Input tray Film type Lower Input tray Film format…

  • Page 54
    7 Service Actions 8 Quality Control 9 Installation When you try to enter the key-operator mode while the Drystar 5302 is printing, it will first finish the active print job(s): Blinking If certain mandatory site-specific data has not yet been entered, the following screen is displayed when entering the key-operator mode (refer to ‘Changing the…
  • Page 55
    Press the Confirm key to return to the key-operator menu. Otherwise, the key- operator menu will be closed. The Drystar 5302 will sound a long beep if you press a key that is not to be used at that moment.

  • Page 56: Viewing Printer Information

    5302 R RYSTAR EFERENCE MANUAL Viewing printer information A number of data and parameter settings of the printer can be viewed by using the ‘Show settings’ function: Show settings Page General ‘Viewing general information’ Input tray ‘Viewing input tray information’ Network (DICOM) ‘Viewing network (DICOM) information’…

  • Page 57
    5302 R RYSTAR EFERENCE MANUAL Accessing the Show settings menu Press the Key-operator key to enter the key-operator mode. On the key-operator main menu, press the Confirm key to select ‘Show settings’. The Show settings menu is displayed: 5 Image quality 6 Logical printers 7 Installed datasets This menu is the starting point for viewing printer information (see next pages).

  • Page 58: Viewing General Information

    More information, such as site-specific data, can be viewed via the browser only. Refer to the chapter ‘Controlling the Drystar 5302 via a remote PC (with browser)’. Press the Confirm key to return to the Show settings menu. Advanced operation (Key-operator mode)

  • Page 59: Viewing Input Tray Information

    5302 R RYSTAR EFERENCE MANUAL Viewing input tray information In this manual, we always will elaborate a case for the lower tray. The procedures of showing the settings are identical for the upper tray. On the Show settings menu, press the Down key once to see the upper tray settings, twice to see the lower tray settings Perform steps 1 and 2 of the ‘Accessing the Show settings menu’…

  • Page 60: Viewing Network (Dicom) Information

    AE-title of the Drystar 5302, • the hostname of the Drystar 5302, • the domain name, • the IP address of the Drystar 5302, • the netmask used for the Drystar 5302, • the IP address of the router, •…

  • Page 61: Viewing General Image Quality Information

    5302 R RYSTAR EFERENCE MANUAL Viewing general image quality information Perform steps 1 and 2 of the ‘Accessing the Show settings menu’ procedure on page 57. On the Show settings menu, press the Down key four times, followed by the Confirm key to select ‘Image quality’.

  • Page 62
    5302 R RYSTAR EFERENCE MANUAL The default densitometer type is displayed: X-rite 310 Press the Confirm key to return to step 3, then press the Escape key to return to the Image quality menu (see step 2). In the Image quality menu, press the Escape key to return to the Show settings menu.

  • Page 63: Viewing Image Quality Information For A Modality

    5302 R RYSTAR EFERENCE MANUAL Viewing image quality information for a modality Perform steps 1 and 2 of the ‘Accessing the Show settings menu’ procedure on page 57. On the Show settings menu, press the Down key four times, followed by the Confirm key to select ‘Image quality’.

  • Page 64: Viewing The Logical Printers Configuration

    2 other logical printers e.g. DS_5302_2, DS_5302_3, … This screen gives an overview of the logical printers defined in the Drystar 5302. The logical printers information can be helpful when assigning a modality output to a particular Drystar 5302 profile. Configuring logical printers can be done via the remote webpages.

  • Page 65: Viewing Installed Datasets Information

    5302 R RYSTAR EFERENCE MANUAL Viewing installed datasets information Perform steps 1 and 2 of the ‘Accessing the Show settings menu’ procedure on page 57. On the Show settings menu, press the Down key six times, followed by the Confirm key to select ‘Installed datasets’. The ‘Installed datasets’…

  • Page 66: Changing The Configuration Settings

    • Via the LOCAL keypad, you can access only the MAIN features. • Via a REMOTE connection, you can access ALL features. For more information about controlling the Drystar 5302 via a remote browser PC, refer to the chapter ‘Controlling the Drystar 5302 via a remote PC (with browser)’…

  • Page 67
    5302 R RYSTAR EFERENCE MANUAL ‘Adding a modality’ Image quality ‘Changing general image quality settings — Film calibration’ ‘Changing general image quality settings — Default densitometer’ ‘Changing Image quality settings for a modality — Selecting a lookup table’ ‘Changing Image quality settings for a modality — Changing the interpolation’…
  • Page 68
    The ‘Change settings’ menu is displayed: 5 Image quality This menu is the starting point for changing the Drystar 5302 settings. Press the Escape key to return to the key-operator main menu. Press the Escape key to quit the key-operator mode.
  • Page 69
    5302 R RYSTAR EFERENCE MANUAL When the automatic backup is finished, you will also be asked to create a back- up of the new settings on an external CF-card. Do one of the following: • If you want to save the configuration on the back-up CF-card, press the Confirm key (YES).

  • Page 70: Changing The Date And Time

    5302 R RYSTAR EFERENCE MANUAL Changing the general settings Changing the date and time Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Confirm key to select ‘General’. The ‘General’…

  • Page 71: Changing The Language

    The ‘General’ screen is displayed: On the ‘General’ screen, press the Down key, followed by the Confirm key to select ‘Language’. The ‘Language’ screen is displayed with the available languages (contact Agfa for the latest Drystar 5302 language availability status). For example: 1*English…

  • Page 72: Changing The Beep On Empty Tray Settings

    5302 R RYSTAR EFERENCE MANUAL Changing the beep on empty tray settings Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on page to select the ‘General’ screen. On the Change settings menu, press the Confirm key to select ‘General’. The ‘General’…

  • Page 73: Changing The Site-Specific Data (Via Remote Browser Only)

    5302 R RYSTAR EFERENCE MANUAL Changing the site-specific data (via remote browser only) The following site-specific data are stored in the Drystar 5302 memory: Field Mandatory Site name Site address (contact) City Tel. country code Tel. number Modem Department Contact person…

  • Page 74: Changing The Film View

    5302 R RYSTAR EFERENCE MANUAL Changing the input tray settings In this manual, we always will elaborate a case for the lower tray. The procedures of changing the settings are identical for the upper tray. On the Change settings menu, press the Down key once to change the upper tray settings, twice to change the lower tray settings.

  • Page 75: Changing The Film Type

    5302 R RYSTAR EFERENCE MANUAL Changing the film type Using the following procedure you can overrule the film type, which is automatically read by means of the Film Identification tag on the film pack. This procedure is only to be used exceptionally when the Film Identification tag info is incorrect.

  • Page 76: Changing The Film Format

    5302 R RYSTAR EFERENCE MANUAL Changing the film format Using the following procedure you can overrule the film format, which is automatically read by means of the Film Identification tag on the film pack. This procedure is only to be used exceptionally when the Film Identification tag info is incorrect.

  • Page 77
    The overrule settings remain active until a new film pack is loaded. If the format is changed from the previous format, the following message appears (example): 11×14″ ‘Drystar 5302 network You must modify the tray configuration. Refer to configuration’ on page for more information.

  • Page 78: Changing The Printer Ae-Title

    5302 R RYSTAR EFERENCE MANUAL Changing network (DICOM) configuration Changing the printer AE-title Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Down key three times, followed by the Confirm key to select ‘Network (DICOM)’.

  • Page 79: Changing The Hostname

    5302 R RYSTAR EFERENCE MANUAL Changing the hostname Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Down key three times, followed by the Confirm key to select ‘Network (DICOM)’. The ‘Network (DICOM)’…

  • Page 80: Changing The Domain Name

    5302 R RYSTAR EFERENCE MANUAL Changing the domain name Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Down key three times, followed by the Confirm key to select ‘Network (DICOM)’. The ‘Network (DICOM)’…

  • Page 81: Changing The Printer Ip Address

    5302 R RYSTAR EFERENCE MANUAL Changing the printer IP address Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Down key three times, followed by the Confirm key to select ‘Network (DICOM)’.

  • Page 82
    5302 R RYSTAR EFERENCE MANUAL Example 1: if the IP address is 120.000.120.120, then the data entry should be as follows: Example 2: if the IP address is 120.0.120.120, then the data entry should be as follows: Press the Confirm key to store the data, or the Escape key to quit the procedure without any changes.

  • Page 83: Changing The Netmask

    5302 R RYSTAR EFERENCE MANUAL Changing the netmask Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Down key three times, followed by the Confirm key to select ‘Network (DICOM)’. The ‘Network (DICOM)’…

  • Page 84: Changing The Router Ip Address

    5302 R RYSTAR EFERENCE MANUAL Changing the router IP address Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Down key three times, followed by the Confirm key to select ‘Network (DICOM)’.

  • Page 85: Removing A Modality

    5302 R RYSTAR EFERENCE MANUAL Removing a modality Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Down key three times, followed by the Confirm key to select ‘Network (DICOM)’. The ‘Network (DICOM)’…

  • Page 86: Adding A Modality

    5302 R RYSTAR EFERENCE MANUAL Adding a modality Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Down key three times, followed by the Confirm key to select ‘Network (DICOM)’. The ‘Network (DICOM)’…

  • Page 87
    5302 R RYSTAR EFERENCE MANUAL Press the Confirm key to store the data, or the Escape key to quit the procedure without any changes. The ‘Select modality brand name’ screen is displayed: 2 FUJI 3 SIEMENS 4 PHILIPS Press the up/down arrow keys to select the appropriate modality brand name. If you have selected ‘Default profile’, the modality AE-title will be linked with the default settings.
  • Page 88
    5302 R RYSTAR EFERENCE MANUAL Press the Confirm key to store the data, or the Escape key to quit the procedure without any changes. The ‘Select preferred FILM TYPE for’ screen will appear: <modality name> 1*Drystar DT 2B 2 Drystar DT 2C You can find the film type on the film packaging, e.g.

  • Page 89: Changing General Image Quality Settings — Film Calibration

    5302 R RYSTAR EFERENCE MANUAL Changing the image quality settings Changing general image quality settings — Film calibration Perform steps 1 and 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Down key four times, followed by the Confirm key to select ‘Image quality’.

  • Page 90
    RYSTAR EFERENCE MANUAL Press the up/down key to select the preferred film calibration default. When the setting is ON, the Drystar 5302 will ask you to enter the calibration frequency: Automatic film calibration after every ‘x’ packs Enter the calibration frequency by means of the up/down key. Refer to ‘Data entry’…

  • Page 91: Changing General Image Quality Settings — Default Densitometer

    5302 R RYSTAR EFERENCE MANUAL Changing general image quality settings — Default densitometer Perform steps 1 and 2 of the ‘Accessing the Change settings menu’ procedure on page 68. On the Change settings menu, press the Down key four times, followed by the Confirm key to select ‘Image quality’.

  • Page 92: Changing Image Quality Settings For A Modality — Selecting A Lookup Table

    • If you want to attribute the default profile, select ‘Profile default’ and press the Confirm key. The Drystar 5302 will be loaded with these settings and return to the ‘Image quality’ main menu (see step 2). • If you want to add a custom profile, select ‘Select other’ and press the Confirm key.

  • Page 93
    5302 R RYSTAR EFERENCE MANUAL The Drystar 5302 will continue with the ‘Select for Modality’ screen, allowing you to change the Look-up table, the Interpolation and the maximum density (Dmax) values manually. <Modality name> 3 Dmax In the ‘Select for Modality’ screen, press the Confirm key to select ‘Look-up table’.
  • Page 94
    • If you want to attribute the default profile, select ‘Profile default’ and press the Confirm key. The Drystar 5302 will be loaded with these settings and return to the ‘Image quality’ main menu (see step 2). • If you want to add a custom profile, select ‘Select other’ and press the Confirm key.
  • Page 95
    5302 R RYSTAR EFERENCE MANUAL The Drystar 5302 will continue with the ‘Select for Modality’ screen, allowing you to change the Look-up table, the Interpolation and the maximum density (Dmax) values manually. <Modality name> 3 Dmax In the ‘Select for Modality’ screen, press the Down key, followed by the Confirm key to select ‘Interpolation’.

  • Page 96: Changing Image Quality Settings For A Modality — Changing The Maximum

    • If you want to attribute the default profile, select ‘Profile default’ and press the Confirm key. The Drystar 5302 will be loaded with these settings and return to the ‘Image quality’ main menu (see step 2). • If you want to add a custom profile, select ‘Select other’ and press the Confirm key.

  • Page 97
    5302 R RYSTAR EFERENCE MANUAL The Drystar 5302 will continue with the ‘Select for Modality’ screen, allowing you to change the Look-up table, the Interpolation and the maximum density (Dmax) values manually. <Modality name> 3 Dmax In the ‘Select for Modality’ screen, press the Down key twice, followed by the Confirm key to select ‘Dmax’.

  • Page 98: Printing Images

    5302 R RYSTAR EFERENCE MANUAL Printing images A number of ‘test’ images can be printed, either from an external CF-card or from the hard disk: Print image Page Test image ‘Printing test images’ From CF-card ‘Printing files from an external CF-card’ Accessing the print images menu Press the Key-operator key to enter the key-operator mode.

  • Page 99
    RYSTAR EFERENCE MANUAL Printing test images Test images are useful for checking the print quality. The Drystar 5302 offers a number of built-in test images stored on the hard disk. Perform steps 1 to 2 of the ‘Accessing the print images menu’…
  • Page 100
    5302 R RYSTAR EFERENCE MANUAL After about five seconds this screen will disappear. If you try to print another image, the following message will appear: Wait until one or more print jobs have finished before launching a new one. Printing files from an external CF-card TIFF images stored on an external CF-card can be printed using the ‘Print from CF-card’…
  • Page 101
    5302 R RYSTAR EFERENCE MANUAL Press the up/down arrow keys to select the desired image file, followed by the Confirm key. The ‘Number of copies’ screen is displayed: Number of desired copies Press the arrow keys to increment/decrement the number. followed by the Confirm key to confirm the number of copies.

  • Page 102: Saving The Configuration Settings

    5302 R RYSTAR EFERENCE MANUAL Saving the configuration settings The save configuration menu allows you to save of all printer settings or to save only the network setting: Save configuration Page General ‘General save configuration procedure’ Network only ‘Network only save configuration procedure’ Accessing the save configuration menu Press the Key-operator key to enter the key-operator mode.

  • Page 103
    5302 R RYSTAR EFERENCE MANUAL General save configuration procedure Each time the settings have been changed and confirmed, an automatic back- up of the old configuration is made on the hard disk. You will also be asked to create a back-up on an external CF-card. It is also possible (and recommended) to regularly make a back-up of the printer settings to ensure safe restoring of the values when required.
  • Page 104
    5302 R RYSTAR EFERENCE MANUAL Remove the CF-card. Refer to ‘Removing a CF-card’ on page 26. As soon as the CF-card has been removed, the following screen is displayed: BAC_<save_set_name> The <save set name > is preceded by the characters “BAC”. BAC stands for General backup.
  • Page 105
    5302 R RYSTAR EFERENCE MANUAL Network only save configuration procedure Perform steps 1 to 2 of the ‘Accessing the save configuration menu’ procedure on page to select the ‘Save configuration’ screen. On the Save configuration menu, press the Down key, followed by the Confirm key to select ‘Network only’.
  • Page 106
    5302 R RYSTAR EFERENCE MANUAL Remove the CF-card. Refer to ‘Removing a CF-card’ on page 26. As soon as the CF-card has been removed, the following screen is displayed: NWS_<save_set_name> The <save set name > is preceded by the characters “NWS”. NWS stands for Network only.

  • Page 107: Restoring The Configuration Settings

    5302 R RYSTAR EFERENCE MANUAL Restoring the configuration settings The restore configuration menu allows you to restore all configuration settings of the printer or to restore only the network setting: Restore configuration Page General ‘Restoring the printer settings’ Network only ‘Restoring the network settings’…

  • Page 108
    5302 R RYSTAR EFERENCE MANUAL Restoring the printer settings When necessary, you can restore the configuration settings of the printer. The following functions are available for restoring a back-up copy of the configuration files: • ‘Restoring printer settings from an external CF-card’ (page 108) •…
  • Page 109
    5302 R RYSTAR EFERENCE MANUAL Insert the CF-card, which contains a back-up of the printer settings. Refer to ‘Inserting a CF-card’ on page 25. Make sure that you insert the correct CF-card, containing the printer settings you want to restore. If no data are available on the CF-card, the following message is displayed: If multiple data are present on the CF-card, the following screens appear successively:…
  • Page 110
    5302 R RYSTAR EFERENCE MANUAL Press the Confirm key (YES) to proceed with the selected file, or the Escape key (NO) to quit the procedure without any changes. If you press the Confirm key, the printer will restore the configuration from the external CF-card on the hard disk and the following screens appear successively: A:\<path><filename>…
  • Page 111
    5302 R RYSTAR EFERENCE MANUAL Restoring printer settings from the hard disk Perform steps 1 to 2 of the ‘Accessing the re store configuration menu’ procedure on page 107. On the Restore configuration menu, press the Confirm key to select ‘General’. The following ‘Restore Configuration’…

  • Page 112: Restoring The Network Settings

    5302 R RYSTAR EFERENCE MANUAL Restoring the network settings When necessary, you can restore the network settings of the printer. You can only restore a back-up copy of the network settings from an external CF-card. Perform steps 1 to 2 of the ‘Accessing the re store configuration menu’…

  • Page 113
    5302 R RYSTAR EFERENCE MANUAL Press the Confirm key (YES) to proceed with the selected file, or the Escape key (NO) to quit the procedure without any changes. If you press the Confirm key, the printer will restore the network settings from the external CF-card on the hard disk and the following screens appear successively: A:\<path><filename>…

  • Page 114: Performing The Calibration Procedures

    5302 R RYSTAR EFERENCE MANUAL Performing the calibration procedures Accessing the Calibration menu Press the Key-operator key to enter the key-operator mode. On the key-operator main menu, press the Down key five times followed by the Confirm key to select ‘Calibration’. The ‘Select calibration’…

  • Page 115
    MDM (Macro Densitometer). The Drystar 5302 is being calibrated during the printing process. If the Drystar 5302 cannot read the Film identification tag, no calibration is possible and the following message is displayed: Press the Confirm key to retry calibrating.
  • Page 116
    5302 R RYSTAR EFERENCE MANUAL When the film calibration has been completed successfully, three cases are possible: • Calibration successful, results OK. The obtained maximum density (Dmax (3.10)) after calibration is displayed: Blinking Blinking Maximum density = 3.10 (X-Rite 301) •…
  • Page 117
    5302 R RYSTAR EFERENCE MANUAL Density response of Drystar media Different densitometers can give different results for measuring the same density area on a Drystar film. This is due to spectral response differences between the densitometers. The density values used in this manual are based on the Macbeth TR924 densitometer.

  • Page 118: Cleaning The Print Head

    5302 R RYSTAR EFERENCE MANUAL Cleaning the print head Print head cleaning must be done when image quality problems occur. To clean the print head: Press the Key-operator key to enter the key-operator mode. On the key-operator main menu, press the Down key five times, followed by the Confirm key to select ‘Calibration’.

  • Page 119
    5302 R RYSTAR EFERENCE MANUAL Open the top cover. As soon as the top cover is opened, the ‘Thermal head cleaning’ screen continues giving the following instructions: Open the hold-down bracket. 2830A EN 20050526 Advanced operation (Key-operator mode)
  • Page 120
    5302 R RYSTAR EFERENCE MANUAL Open the print head unit. The print head unit can be warm. Locate and check on sight the print head resistor line. Be careful not to touch the print head resistor line with your fingers. Advanced operation (Key-operator mode) 2830A EN 20050526…
  • Page 121
    5302 R RYSTAR EFERENCE MANUAL Clean the print head resistor line. Gently pass over the resistor line a few times with a lint free cloth, slightly moistened with Isopropyl alcohol or Ethanol. Do this only in one direction, i.e. from left to right, without lifting the cloth.

  • Page 122: Service Actions

    5302 R RYSTAR EFERENCE MANUAL Service actions The Drystar 5302 is capable of assisting the Service engineer and/or hospital technician to maintain or repair the printer. Overview of service actions Four groups of service actions are provided by the Drystar 5302.

  • Page 123
    If no data is available for the selected service action, the following screen appears: • If data available for the selected service action, detailed screens appears. Please contact your AGFA representative for detailed information about the various service action screens. Press the Escape key to return to the key-operator main menu.

  • Page 124: Quality Control

    In order to establish and maintain consistent image quality, a regular evaluation of image quality is advised. The Drystar 5302 contains an automatic QC feature that has been designed to comply with the grayscale reproduction constancy test, according to the international standard IEC 1223-2-4.

  • Page 125
    EFERENCE MANUAL Establishing the reference values and verifying image quality After installation of a new Drystar 5302 and before initial use you must establish Quality Control aim values. These values will be used as the base line for comparison when daily Quality Control is done. These values should be determined again after major service, repair or software update.
  • Page 126
    5302 R RYSTAR EFERENCE MANUAL QC test image The QC image has several additional fields where the QC data can be filled in. This image should be filed as part of the QC procedure. The following two examples illustrate a QC test image for a different film format.
  • Page 127
    5302 R RYSTAR EFERENCE MANUAL • QC test image for film format 8×10” Geometry test Daily density tests Max D Max D Hi D Hi D Mid D Mid D Lo D Lo D Base Base + Fog + Fog Density Difference (Hi D — Lo D) Weekly spatial…
  • Page 128
    • Mid density • High density The densitometer of the Drystar 5302 is calibrated at installation. Authorized service personnel should recalibrate the densitometer annually or after major service or repair. To establish the daily operating levels, proceed as follows: Press the Key-operator key to enter the Key-operator mode.
  • Page 129
    Press the Up/Down arrow keys to select the desired tray, followed by the Confirm key. The following screens appear successively: The Drystar 5302 will automatically print the QC test image. After the image is printed, the system will display the optical density values: The density levels are displayed, e.g: Max D: 3.1…
  • Page 130
    5302 R RYSTAR EFERENCE MANUAL Record the low, mid and high density levels on Chart 1 (‘Drystar 5302 Determination of Operating Levels’). Refer to ‘Quality Control Charts’ page 211. Press the Confirm key to return to the main menu. Repeat step…
  • Page 131
    We strongly recommend using a 30 cm (12-inch) machinist scale with 0.5 mm divisions (1/64 inch). Record these values as reference dimensions A on Chart 4 (‘Drystar 5302 Geometric Consistency Control Chart’). Refer to ‘Quality Control Charts’ on page 211.
  • Page 132
    126) and the upper circle (refer to item 2 on the ‘QC test image’ on page 126). Record these values at the top of Chart 3 (‘Drystar 5302 Artifacts and Spatial Resolution Control Chart’). Refer to ‘Quality Control Charts’ on page 211.
  • Page 133
    Performing the daily QC test This test must be performed every day before any clinical film can be processed. Turn on the Drystar 5302 and wait at least for 15 minutes. Refer to ‘Switching on the Drystar 5302’ on page 32.
  • Page 134
    (Densitometer=MB924) Record the low, mid and high density values on Charts 2A and 2B (‘Drystar 5302 Daily Density Control Chart’). Also record the date and time of the test on the charts and on the QC test images. Refer to ‘Quality Control…
  • Page 135
    2 on the ‘QC test image’ on page 126). Record these values on Chart 3 (‘Drystar 5302 Artifacts and Spatial Resolution Control Chart’). In case of significant artifacts, insufficient spatial resolution or failure of any other recommended QC tests, the cause of the problem must be identified, and corrective action must be taken before the Drystar 5302 can be used for any further clinical imaging.
  • Page 136
    We strongly recommend using a 30 cm (12-inch) machinist scale with 0.5 mm divisions (1/64 inch). Record these values as measured dimensions A and B on Chart 4 (‘Drystar 5302 Geometric Consistency Control Chart’). Compare the measured A and B dimensions with the reference dimension…

  • Page 137: Installation

    5302 R RYSTAR EFERENCE MANUAL Installation Two installation operations are possible: • install new software, or upgrade existing software from a CF-card, • perform a complete installation procedure, using the printer installation wizard. Installing new or upgrading existing software It is possible to install new software or new software components. Different software (components) can be installed: •…

  • Page 138
    5302 R RYSTAR EFERENCE MANUAL Press the Confirm key to select ‘Installation from CF-card’. Before the procedure starts, the system suggests you make a back-up copy of the current configuration. It is highly recommended to do this, so you can always restore it in case something should go wrong.
  • Page 139
    5302 R RYSTAR EFERENCE MANUAL Press the up/down arrow keys to select the desired save set file, followed by the Confirm key. The following confirmation screen is displayed: <Dataset def v1.00> Press the Confirm key (YES) to proceed with the selected file, or the Escape key (NO) to quit the procedure without any changes.
  • Page 140
    5302 R RYSTAR EFERENCE MANUAL Using the installation wizard When you install the Drystar 5302, the installation wizard will guide you through the complete installation procedure. The installation wizard consists of three steps: • ‘Entering the printer network settings’ (page 142), •…
  • Page 141
    5302 R RYSTAR EFERENCE MANUAL Press the up/down arrow keys to select the desired language. Press the Confirm key to store the data, or the Escape key to quit the procedure without any changes. The ‘Date’ screen is displayed: Press the up/down arrow keys to increment/decrement the numbers or the month.
  • Page 142
    5302 R RYSTAR EFERENCE MANUAL Press the Confirm key to continue. A screen with information on the sequence of the steps will appear: settings 2.Host specific settings 3.Save configuration Press the Confirm key to start with step 1 or press the Escape key to quit the procedure.
  • Page 143
    5302 R RYSTAR EFERENCE MANUAL Press the up/down arrow keys to increment/decrement the numbers. Press the left/right arrow keys to move through the fields. Press the Confirm key to store the data. Refer to ‘Data entry’ on page 31. Note that blank spaces will be ignored (see examples below). Example 1: if the IP address is 120.000.120.120, then the data entry should be as follows: Example 2: if the IP address is 120.0.120.120, then the data entry should be as…
  • Page 144
    5302 R RYSTAR EFERENCE MANUAL Press the Confirm key to store the data, or the Escape key to quit the procedure without any changes. The ‘Router IP address’ screen is displayed: 120.120.120.120 If the Router IP address has already been assigned, it will be shown on the display. Enter the Router IP address by means of the arrow keys.
  • Page 145
    Press the Escape key to exit the wizard on the local keypad. Refer to ‘Controlling the Drystar 5302 via a remote PC (with browser)’ on page 151. If you wish to continue with the installation wizard from the local keypad, press the Confirm key to continue.
  • Page 146
    5302 R RYSTAR EFERENCE MANUAL Entering modality specific settings An instruction screen shows the information you need to complete this part of the installation: name -Modality brand -Modality type -Modality AE-title ——————— ask your network administrator for this information. Press the Confirm key to continue or press the Escape key to skip this step. The ‘Enter daily used Modality name’…
  • Page 147
    5302 R RYSTAR EFERENCE MANUAL Press the Confirm key to store the data, or the Escape key to quit the procedure without any changes. The ‘Select modality type’ screen is displayed: 2 MXVIEW 3 MX800 Press the up/down arrow keys to select the appropriate modality type. Press the Confirm key to store the data, or the Escape key to quit the procedure without any changes.
  • Page 148
    5302 R RYSTAR EFERENCE MANUAL Press the Confirm key to store the data, or the Escape key to quit the procedure without any changes. A screen summarizing the information you have entered will appear: Following data CTscanner Brand name: Philips Modality type: MXVIEW Modality AE-title:…

  • Page 149: Saving The Configuration

    5302 R RYSTAR EFERENCE MANUAL Saving the configuration You need to complete this step, otherwise all the install data you have entered will be lost! The printer settings are saved automatically to the hard disk. When 100% is reached, the following ‘Save configuration’ screen will ask you to insert the back-up CF-card: Insert a CF-card.

  • Page 150
    5302 R RYSTAR EFERENCE MANUAL Label the CF-card with the BAC_<save_set_name> and press the Confirm key. The installation is now finished, and the following screen is displayed: CALIBRATION Option for further actions and to fill in the SITE-SPECIFIC DATA Press the Confirm key to accept the installation or press the Escape key to redo the installation.

  • Page 151: Chapter 4: Controlling The Drystar 5302 Via A Remote Pc (With Browser)

    Controlling the Drystar 5302 via a remote (with browser) This chapter will inform you on how to control the functions of the Drystar 5302 via the browser on a remote PC. Features Setup Setting up the connection Starting the remote session…

  • Page 152: Features

    A network adapter, • A cross-link Ethernet cable (for a direct link between PC and Drystar 5302) or a straight Ethernet cable (for a connection via an existing network). Using the remote PC, you have access to five operating modes of the Drystar 5302: Operator mode, Key-operator mode, Service mode, Specialist mode, and Administrator (Security).

  • Page 153: Setup

    5302 R RYSTAR EFERENCE MANUAL Setup The Drystar 5302 and the PC with browser can be set up in two ways: • using a crossed network cable, or • using a straight network cable. Configuration with crossed network cable In this configuration, a crossed network UTP cable is used to connect the service PC directly to the printer.

  • Page 154
    5302 R RYSTAR EFERENCE MANUAL Configuration with straight network cable In this configuration, the PC is connected to the network with a straight network cable. Controlling the Drystar 5302 via a remote PC (with browser) 2830A EN 20050526…

  • Page 155: Setting Up The Connection

    Attributing a fixed IP address to the PC Go to Settings via the Start menu of Windows and click Control Panel. The Control Panel menu will appear. 2830A EN 20050526 Controlling the Drystar 5302 via a remote PC (with browser)

  • Page 156
    5302 R RYSTAR EFERENCE MANUAL In the Control Panel menu, double-click Network. In the Network window, select TCP/IP Protocol, select the Protocols tab, and click Properties. Controlling the Drystar 5302 via a remote PC (with browser) 2830A EN 20050526…
  • Page 157
    255.255.0.0. Switching off the proxy settings of the browser Open the browser. In the Tools menu, click Internet Options. The Internet Options window will appear. 2830A EN 20050526 Controlling the Drystar 5302 via a remote PC (with browser)
  • Page 158
    Switch off all proxy settings of the browser and click OK. The PC is ready to make a connection. Refer to ‘Starting the remote session’ on page for more information. Controlling the Drystar 5302 via a remote PC (with browser) 2830A EN 20050526…
  • Page 159
    IP address to the PC’ on page 155. The PC is ready to make a connection. Refer to ‘Starting the remote session’ page for more information. 2830A EN 20050526 Controlling the Drystar 5302 via a remote PC (with browser)

  • Page 160: Starting The Remote Session

    Starting the remote session When starting the remote session, make sure the printer is in ‘Ready’ mode. To start the remote session, enter the Drystar 5302 IP address in the Address bar of the browser. The Browser welcome page appears: There are five access levels: Operator, Key-operator, Service Engineer, Specialist and Security (also know as administrator).

  • Page 161
    • Password: 5302 You now have access to the Drystar 5302 functions in the key-operator mode. Only one session is active at one time on one printer. Mostly, the menu structure and the browser screens are structured in the same way as the local display of the printer.
  • Page 162
    • save and restore configuration datasets on/from the remote PC. Do not use the Back and Forward buttons of your browser. Use the links included in the web pages instead. Controlling the Drystar 5302 via a remote PC (with browser) 2830A EN 20050526…

  • Page 163: Chapter 5: System Description

    Chapter System description In this informative chapter you will find mechanical and functional descriptions. Main components Functional description Changing the film format of the trays Drystar 5302 network configuration Transport after installation…

  • Page 164: Main Components

    5302 R RYSTAR EFERENCE MANUAL Main components Front view Top cover Output tray User interface (refer to page 22) Input tray Rear view CF-card slot Network RS-232 =>Service PC Power connection System description 2830A EN 20050526…

  • Page 165: Functional Description

    5302 R RYSTAR EFERENCE MANUAL Functional description The Drystar 5302 consists of two functional blocks: a controller and a print engine. The controller • captures the incoming digital data and stores the image, • composes the different images, and •…

  • Page 166: Changing The Film Format Of The Trays

    5302 R RYSTAR EFERENCE MANUAL Changing the film format of the trays The key-operator can adjust the film size setting of both input trays (8×10” up to 14×17” film sizes). First, the key-operator has to perform a mechanical modification. After this modification, the ‘film format’…

  • Page 167
    5302 R RYSTAR EFERENCE MANUAL Remove the film position tab. Locate the correct tab position for the desired film format. 17″ 14″ 12″ 11″ 8″ 10″ 14″ 2830A EN 20050526 System description…
  • Page 168
    5302 R RYSTAR EFERENCE MANUAL Put the film position tab in place and push it down until it locks. Load a new film pack. Refer to ‘Loading films’ on page 44. System description 2830A EN 20050526…

  • Page 169: Drystar 5302 Network Configuration

    EFERENCE MANUAL Drystar 5302 network configuration The Drystar 5302 is a standard network printer. This means that you can just plug it into the (existing) ethernet network without any additional options or accessories. Drystar 5302 is also a native DICOM printer. Therefore the…

  • Page 170: Transport After Installation

    5302 R RYSTAR EFERENCE MANUAL Transport after installation The Drystar 5302 is quite compact, so moving the printer over a short distance — if required — can be done in a convenient way. Refer to ‘Safety precautions’ on page 11.

  • Page 171: Chapter 6: Preventive Maintenance

    Chapter Preventive maintenance This chapter guides the user through maintenance and cleaning tasks which require no special skills, tools nor training: Preventive maintenance schedule Cleaning the exterior…

  • Page 172: Preventive Maintenance Schedule

    Do not touch the resistor line of the print head. • Always switch off the Drystar 5302 and disconnect the power cord from the outlet before carrying out any maintenance work inside the printer. Film jam removal or cleaning the printer head can be done without switching the power off.

  • Page 173: Cleaning The Exterior

    5302 R RYSTAR EFERENCE MANUAL Cleaning the exterior Switch off the Drystar 5302 by following the procedure as described in ‘Switching off the Drystar 5302’ on page 34. Remove the power plug from the socket. Wipe the exterior of the printer with a clean, soft, damp cloth.

  • Page 174
    5302 R RYSTAR EFERENCE MANUAL Preventive maintenance 2830A EN 20050526…

  • Page 175: Chapter 7: Troubleshooting

    Troubleshooting This chapter serves as a guide to identify and solve possible problems you may encounter. Troubleshooting checklist The Drystar 5302 does not print Clearing of film jams Film identification problems Start-up errors Maintaining image quality and resolving image qual-…

  • Page 176: Troubleshooting Checklist

    RYSTAR EFERENCE MANUAL Troubleshooting checklist The table below lists some general problems, which can occur when working with the Drystar 5302. • The Drystar 5302 does not print. Action Refer to Page ‘Checking the status indicator LED’ ‘Checking the connections’…

  • Page 177
    5302 R RYSTAR EFERENCE MANUAL Checking the status indicator LED The LED on the front panel indicates the Drystar 5302 operating status. Use the following table to determine the status of your printer. Receive Printing Colour Light Status Action jobs? Ready (stand-by) Proceed.

  • Page 178: The Drystar 5302 Does Not Print

    5302 R RYSTAR EFERENCE MANUAL The Drystar 5302 does not print Reset of the printer The Power/Reset button restarts the printer after a software failure or an error. Refer to on page ‘Switching off the Drystar 5302’ Checking the connections Regularly check all electrical connections.

  • Page 179
    EFERENCE MANUAL Checking error messages If the Drystar 5302 is not printing your job, you should check the front panel display to see if the Drystar 5302 is indicating an error status. The operator is notified of the situation by means of an error screen and a beep.
  • Page 180
    5302 R RYSTAR EFERENCE MANUAL Checking the print queue If no error message is displayed, you should check the print queue: Mod.name The status can be: • printing (PR), • calculating (CA). A warning status, indicated by a blinking “W” in the upper right corner of the display, indicates that there is a problem that should be attended to.

  • Page 181: Clearing Of Film Jams

    5302 R RYSTAR EFERENCE MANUAL Clearing of film jams A film jam can be situated either: • In the input tray section. Refer to ‘Film input tray jams’ on page 182. • In the top section. Refer to ‘Film transport jams (clearing from the top)’ page 185.

  • Page 182
    EFERENCE MANUAL Film input tray jams A film jam in the input tray can occur when the Drystar 5302 is opened while a film is currently printed, or when an individual film is incorrectly inserted in the input tray. Refer also to ‘Film identification problems’…
  • Page 183
    5302 R RYSTAR EFERENCE MANUAL To get a clear view, it may be necessary to remove any remaining film sheets, including the protective (white) sheet. Check if the film feed section of the input tray is clear. 2830A EN 20050526 Troubleshooting…
  • Page 184
    5302 R RYSTAR EFERENCE MANUAL Reposition the film stack in the film tray, making sure that all the sheets are kept correctly in place (refer to ‘Loading films’ on page 44). Close the film input tray. Troubleshooting 2830A EN 20050526…
  • Page 185
    5302 R RYSTAR EFERENCE MANUAL Film transport jams (clearing from the top) The following screen indicates that a jam occurred in the upper section of the film transport system. Blinking To remove a jammed film in the transport system: Please note that instructions for removing a film jam in the transport section are present on a sticker at the inside of the top cover.
  • Page 186
    5302 R RYSTAR EFERENCE MANUAL Open the print head unit. The print head unit can be warm. Gently remove the film sheet(s). Never use force to clear the jammed film. If it is not possible to gently remove the jammed film by pressing the transport buttons, proceed with the procedure as follows.
  • Page 187
    Press the Confirm key to continue. Make sure to follow carefully the procedures as described in this manual before attempting to open the printer. Refer to ‘Switching off the Drystar 5302’ on page 34. Refer to ‘Loading films’ on page 44.

  • Page 188: Film Identification Problems

    Overrule the Film Identification tag of the film pack To reload the current or another film pack In case the Drystar 5302 does not start printing after re-inserting a film pack, first check if this film pack is inserted correctly.

  • Page 189
    Only your local service organization has the possibility to enable the “Overrule RF- tag Reading” setting! In case the Drystar 5302 does not start printing after inserting a new film pack, check if this film pack is inserted correctly. If the film pack is inserted correctly and the Drystar 5302 does not resume printing,…
  • Page 190
    5302 R RYSTAR EFERENCE MANUAL Press the Confirm button. • If the “Overrule RF-tag Reading” Setting is active, the following message is displayed: OVERRULE IDENTIFICATION CODE IS ACTIVE Dmax is limited due to safety reasons • If the “Overrule RF-tag Reading” Setting is not activated, the following message will be displayed: Re-enable printing by inserting correct…
  • Page 191
    5302 R RYSTAR EFERENCE MANUAL Film overrun from current pack The following message is presented when more than 110 copies are printed from the current film pack: THIS PACK. please insert other film pack. Reload a new film pack to resolve this problem. 2830A EN 20050526 Troubleshooting…

  • Page 192: Error Messages During Printer Start-Up

    ‘Checking error messages’ on page 179. After starting up the Drystar 5302, the printer performs a self-test. A progress indicator will show the proceeding of this self-test. During the self-test, a number of messages can appear, meaning that the self-test has failed.

  • Page 193
    5302 R RYSTAR EFERENCE MANUAL System self test failed In case the system self test failed, following message appears: ERROR System failure Software self test failed In case the software selftest has failed, following message appears: 2830A EN 20050526 Troubleshooting…

  • Page 194: Maintaining Image Quality And Resolving Image Quality Problems

    • After the replacement of a thermal head, • When loading new films into the input tray. Overview of calibration functions Two calibration functions are provided for the Drystar 5302. Calibration Purpose When? • To measure and set the system density of the •…

  • Page 195
    5302 R RYSTAR EFERENCE MANUAL Understanding the calibration policy You should regularly perform a film calibration to assure an optimal image quality. Film calibration can be initiated in 2 ways: • Automatically, i.e. after printing every ‘x’ new film packs (frequency is adjustable), •…
  • Page 196
    5302 R RYSTAR EFERENCE MANUAL Persistent white dots or lines appear in the transport direction If fine white dots and one or more fine white lines appear in the transport direction (mostly due to dust infiltration), try the following remedies: Clean the print head resistor line.

  • Page 197: Warning Messages

    <explanatory text> Press the Confirm key to acknowledge the new warning condition. As long as the warning condition has not been resolved, the other Drystar 5302 screens (except the Key-operator screens) will show a ‘W’ character blinking in the upper right corner (e.g. the Operator menu screen): ‘W’…

  • Page 198: Maintenance Messages

    <explanatory text> Press the Confirm key to acknowledge the new maintenance condition. As long as the maintenance action has not been executed, the other Drystar 5302 screens (except the Key-operator screens) will show a ‘M’ character blinking in the upper right corner (e.g. the Operator menu screen): ‘M’…

  • Page 199: Appendix A: Equipment Information Sheet

    Appendix Equipment information sheet…

  • Page 200: Specifications

    5302 R RYSTAR EFERENCE MANUAL Specifications Product description Type of product Printer Commercial name Drystar 5302 Original seller/manufacturer Agfa-Gevaert N.V. Labelling TÜV-, cULus-Certification Mark, CE-marking CCC Mark Dimensions • Unpacked: width 72.8, length 71.5, height 67.6 Dimensions (approx. values in cm) •…

  • Page 201
    5302 R RYSTAR EFERENCE MANUAL Network connectivity RJ45 twisted pair for 10/100Base-TX; Ethernet / connectors Serial RS232 connection Network protocols (TCP/IP services) FTP, Telnet, HTTP DICOM (Default) Image formats TIFF Postscript Not available Power consumption — heat dissipation During operation 250 W — 900 kJ/h In stand-by 70 W — 252 kJ/h…
  • Page 202
    Print technology Direct thermal printing Reliability Estimated product life (if regularly serviced and maintained > 5 years according to Agfa instructions) Service interventions Max. 2 interventions / 3 years Earthquake (standard) Meets the CA requirements Equipment information sheet 2830A EN 20050526…
  • Page 203
    5302 R RYSTAR EFERENCE MANUAL Imaging Array — Diagnostic area 8×10” 8” dimensions 10” dimensions pixels pixels 2376 188.65 3070 243.76 10×12” 10” dimensions 12” dimensions pixels pixels 3070 243.76 3653 290.05 11×14” 11” dimensions 14” dimensions pixels pixels 3348 265.83 4358 346.03…

  • Page 204: Viewing The System Info Area On A Film

    The System info area contains info about: • Printer: (serial number, densitometer info, film counts, software version, etc.), • Controller (image source, date, time, etc.). For more detailed information, refer to the Drystar 5302 Service documentation. Equipment information sheet 2830A EN 20050526…

  • Page 205: Options And Accessories

    5302 R RYSTAR EFERENCE MANUAL Options and accessories Mobile / Earthquake provisions Not available. 2830A EN 20050526 Equipment information sheet…

  • Page 206: Connectivity

    Drystar 5302 is a Dicom printer and can therefore be connected to all modalities supporting Dicom. Although, to ensure optimal operation and image quality, Agfa has made the effort to test and release the Drystar 5302 with most of modalities on the market. For the complete list or if you want to check on a specific modality, contact your Agfa representative.

  • Page 207: Appendix B: Drystar Media Density Response Data

    Appendix Drystar media density response data…

  • Page 208: Drystar Dt 2B

    5302 R RYSTAR EFERENCE MANUAL Drystar DT 2B MacBeth Gretag X-rite X-rite X-rite X-rite dens. TR-924 D200-2 0.22 0.16 0.18 0.23 0.19 0.19 0.45 0.47 0.52 0.48 0.48 0.78 0.73 0.75 0.80 0.76 0.76 1.06 1.02 1.03 1.09 1.05 1.04 1.35 1.30 1.31…

  • Page 209: Drystar Dt 2C

    5302 R RYSTAR EFERENCE MANUAL Drystar DT 2C MacBeth Gretag X-rite X-rite X-rite X-rite dens. TR-924 D200-2 0.10 0.08 0.07 0.09 0.08 0.07 0.38 0.37 0.36 0.38 0.38 0.38 0.65 0.64 0.64 0.66 0.65 0.65 0.94 0.93 0.92 0.95 0.93 0.93 1.21 1.20…

  • Page 210
    5302 R RYSTAR EFERENCE MANUAL Drystar media density response data 2830A EN 20050526…
  • Page 211
    Appendix Quality Control Charts…
  • Page 212
    5302 R RYSTAR EFERENCE MANUAL Chart 1 Drystar 5302: Determination of Operating Levels Imager Type: __________ Serial #: _________________ Date ____________________ Film Type: ____________ Emulsion #: ______________ Densitometer: _________________ (default selection) Step 1: Print QC Test images on five consecutive days. Record the optical densities measurements in the tables below.
  • Page 213
    5302 R RYSTAR EFERENCE MANUAL Chart 2A Drystar 5302 Daily Density Control Chart Imager Type: __________ Serial #: _____________ Film Type:____________ Emul #:___________ Densitometer: ____________________ (default selection) Da te : Initia ls: Upper Control limit = +0.05 Calculated Reference Low Density Level…
  • Page 214
    5302 R RYSTAR EFERENCE MANUAL Chart 2B Drystar 5302 Daily Density Control Chart Imager Type: __________ Serial #: _____________ Film Type:____________ Emul #:___________ Densitometer: ____________________ (default selection) High Density Upper Control limit = +0.20 Calculated Reference High Density Level Lower Control Limit = -0.20…
  • Page 215
    5302 R RYSTAR EFERENCE MANUAL Chart 3 Drystar 5302 Artifacts and Spatial Resolution Control Chart Test Frequency: Weekly Drystar 5302 Serial # _____________ Initial Reference Test Date Initial Reference Artifacts Initial Reference Dot Visibility Initial Reference Low Contrast Month Artifacts…
  • Page 216
    5302 R RYSTAR EFERENCE MANUAL Chart 4 Drystar 5302 Geometric Consistency Control Chart Test Frequency: Annually or as required Drystar 5302 Serial # ______________ Reference Dimensions Measured Dimensions Consistency Aspect Ratio Date: Date: Reference Dimensions Measured Dimensions Consistency Aspect Ratio…
  • Page 217
    Appendix Index…
  • Page 218
    DT 2B Configuration with crossed network ………153 ……….209 cable DT 2C Configuration with straight network ………154 cable Control Drystar 5302 via browser ……….151 Earthquake provisions ….. 205 …..161 Enter key-operator level Environmental conditions ….161 Enter operator level Operation ……..
  • Page 219
    5302 R RYSTAR EFERENCE MANUAL ……..44 ..81 Load new Change Printer IP address ….. 22 ..84 Output tray location Change Router IP address Quality problems of printed films Solve white dots or lines problems ……….196 ……..181 …….
  • Page 220
    5302 R RYSTAR EFERENCE MANUAL ……..85 ..194 Remove Quality problems of printed films ……83 Netmask, change Remote PC Configuration with crossed network ……..153 cable Configuration with straight network Operator cable ……..154 ……..30 Main screen ….107 Restoring settings, printer ……….19 Mode…
  • Page 221
    Description ……..23 Location ……..22 Switch off ……. 34 Drystar 5302 ……157 Proxy settings ….. 32 Switch on Drystar 5302 ……204 System info area Transport after installation ….170 Tray ……..42 Input tray ….176 Troubleshooting checklist TÜV label. See Labels Upgrading software ……
  • Page 222
    Printed in Belgium Published by Agfa-Gevaert N.V., B-2640 Mortsel-Belgium 2830A EN 20050526…

Источник

Принтер DryStar 5302 ф.AGFA

МВР Дата: Воскресенье, 23.Янв.2011, 18:02 | Сообщение # 1

Медтехник

OFFлайн

Российская Федерация



.

 . 21 июля 1873 года две немецкие компании образовали акционерное общество под названием Actien-Gesellschaft für Anilin-Fabrikation (AGFA — аббревиатура, образованная от этого словосочетания), в последствии деятельность неоднократно трансформировалась, но торговый бренд «AGFA» не изменялся.

. Тема про проблемы с принтером DryStar 5302 производства немецкой компании c брендом «AGFA».

. ВНИМАНИЕ! Прежде чем писать что-то своё в этой теме обязательно прочтите её с самого начала — возможно об этом уже есть информация в теме — дважды и более мусолить одно и тоже не нужно,
и излагайте свои мысли (вопросы/ответы) сразу же полностью по существу рассматриваемой проблемы, а не нудно по каплям с цитатами, иначе полезная тема получится утомительно длинной!

. Чтобы не удлинять итак длинную тему Вашим нудным монологом из череды следующих друг за другом Ваших же постов (постов-хвостов), для уточнения или добавления новой информации пользуйтесь редактированием свои крайних сообщений-постов (кнопка: «Изменить») — это требование п.1.5 Правил размещения сообщений в темах Форума.
. И ещё к сведению и обязательному исполнению см. по ссылке это ТРЕБОВАНИЕ (с.20) ! Не демонстрируйте на Форуме свою неинженерную малограмотность, а тем более, бесстыдно не кичитесь ею! …

Темы о проблемах с принтерами DryStar производства компании бренда «AGFA» см. здесь — http://www.medteh.info/forum/33-0-1-0-10-1-[DryStar]

Внимание! Стараниями неразумных якобы «инженеров» и прочих в теме много вопросов и соответственно ответов на них о проблемах с другими принтерами от бренда AGFA.


.
 
renmaster Дата: Воскресенье, 23.Янв.2011, 22:15 | Сообщение # 2

OFFлайн

Российская Федерация



Россия

Цитата sloniks ()

Принтер DryStar 5302 («DS5302») бренда AGFA.
Пробовал заменить плёнку на первоначальный формат (новую упаковку), восстановление с карты памяти и тд.
Баркодридер читает, формат определяет, но при загрузке плёнки ругается и деактивирует лоток.
Нужны сервисные пароли или любая другая помощь … Как сделать полный резет?

Расшифруй — изменить формат изображения или изменить размерность плёнки?
Плёнка тип — термографическая плёнка DRYSTAR DT2 B (голубая основа)?
 
sloniks Дата: Понедельник, 24.Янв.2011, 08:44 | Сообщение # 3

Техник

Инженер

OFFлайн

Российская Федерация



Вологда

Цитата renmaster ()

Расшифруй

Размерность плёнки …
Тип плёнки DryStar DT2 B, размер 11*14 in, хотя не имеет значение …
Нужны сервисные логины/пароли, или как сделать полное восстановление заводских настроек (помимо времени, языка, Dicom и тд.) …
 
vvv3vvv Дата: Суббота, 29.Янв.2011, 22:23 | Сообщение # 4

Участник

электромеханик по рентг.

OFFлайн

Российская Федерация



приморск

 в комплекте с принтером , в лотке есть ячейка , там вложена компакт-флеш карта , на ней резервная копия установленного софта
 
sloniks Дата: Воскресенье, 30.Янв.2011, 21:15 | Сообщение # 5

Техник

Инженер

OFFлайн

Российская Федерация



Вологда

Quote (vvv3vvv)

вложена компакт-флеш карта

да, да с нее восстанавливали, но дело в том, что принтер помнит все бар коды использованной пленки, а чтобы сбросить их нужен пароль сервисмена (пользователи навставляли листов с одной упаковки на баркод от другой, потом вообще потасовали их..), обидно что пропадает почти целая упаковка…
 
vvv3vvv Дата: Воскресенье, 30.Янв.2011, 23:26 | Сообщение # 6

Участник

электромеханик по рентг.

OFFлайн

Российская Федерация



приморск

 blush Дело в том , что эта информация находится не в принтере Агфа , а как раз в чипе, и не один сервисный код к принтеру чип не вылечит(даже если вставить отработанный чип с пленкой в другой принтер система скажет пленки -НЕТ). Единственное я слышал что чип знает не точное количество пленки, а имеющееся количество пленки в упаковке +10%,

Сообщение отредактировал vvv3vvv — Понедельник, 31.Янв.2011, 21:18
 
NIK28 Дата: Вторник, 09.Авг.2011, 11:29 | Сообщение # 7

Стажер

инженер

OFFлайн

Российская Федерация



Северо-Запад

 Здравствуйте, коллеги.
Может кто подскажет где искать.
Принтер DRYSTAR 5302. Похожая неисправность, описанная выше: после очередной загрузки нового блока плёнки персоналом КТ-кабинета, принтер пишет: «ВЕРХНИЙ ОШИБКА МЕТКИ», далее: «ДЕАКТИВАЦИЯ», далее: «НИЖНИЙ ОШИБКА МЕТКИ» и тоже: «ДЕАКТИВАЦИЯ».
В обоих лотках новая упаковка плёнки. Ошибка при заправке маловероятна — персонал заправлял принтер много раз без проблем. Замена на другой блок не помогла, после загрузил его на другой принтер (AGFA с одним лотком) — работает.
Проверил настройки принтера: ТИП, ФОРМАТ — соответствует. Восстановление с карточки не делал — не думаю, что поможет.
 
olegp Дата: Пятница, 12.Авг.2011, 18:51 | Сообщение # 8

Участник

Инженер

OFFлайн

Российская Федерация



Набережные Челны

 Здравствуйте коллеги.
Поимел эту проблему 3-и месяца назад. Проблема связана исключительно с плёнкой из новых закупок. Проявилась одновременно на AGFA Drystar 5302 и Axis Позвонил в AGFA и получил ответ, что они меняют систему идентификации на плёнке и для продолжения работы нужно загрузить новый софт в аппарат. Получил ссылку на архив, скачал его, скопировал на CF. Сунул-вынул. Перезапустил. Всё заработало как надо. Старые плёнки из прежних поставок тоже считались. Сейчас поищу архив.

P.S. Кому сильно припёрло — напишите olegpСОБАКАnewmail.ru. Перешлю.

Размер архива 81,54Мб. Внутри всё, включая офф.пояснения. Выложил на http://depositfiles.com/files/pgkk491hg

P.P.S. Инженер AGFA сказал, что после установки этой версии софта нельзя менять язык интерфейса. У меня после установки сразу встал русский, и менять ничего не пришлось. Поэтому прокомментировать это предостережение не могу. Я сразу ставил с CF, по сети, через Java, не пробовал.

Да, чуть опять не забыл. Перед установкой нового софта сохраните старую конфигурацию, на этой-же флэшке. Получится файл типа BAC_drystar5302_****.zip. Потом переписывайте содержимое архива в корень CF и далее по инструкции. После перезапуска все настройки будут из бэкапа.

Сообщение отредактировал olegp — Воскресенье, 14.Авг.2011, 15:07
 
sloniks Дата: Суббота, 13.Авг.2011, 07:53 | Сообщение # 9

Техник

Инженер

OFFлайн

Российская Федерация



Вологда

 olegp, спасибо за информацию, попробуем..
ИМХО данные принтеры (термо) далеки от пленки как факс от принтера…
 
olegp Дата: Суббота, 13.Авг.2011, 12:42 | Сообщение # 10

Участник

Инженер

OFFлайн

Российская Федерация



Набережные Челны

 Да меня больше удивляет позиция Agf-ы. Ни гу-гу, ни звука. Аппаратов-то продано не мало и по проекту и без. С каждым ведь есть договор, а в нём все реквизиты, включая е-майл. Неужели трудно позвонить. Хотя, может быть это задача региональных представителей, а это уже наши люди… Ладно, я в пару дней уложился со своими экспериментами с перекладкой пачек плёнки из старых и новых закупок из лотка в лоток и из одного аппарата в другой, а вы, я вижу, с января кувыркаетесь!!! Кстати, для AGFA Drystar 5300 такой проблемы нет, там 14х17 DRYSTAR DT2 B. По крайней мере, пока нет…
 
Senergy Дата: Вторник, 20.Сен.2011, 16:30 | Сообщение # 11

Участник

Инженер по сервису

OFFлайн

Российская Федерация



Казань

 Уважаемые медтехники! Подкидываю новую головоломку по DryStar 5302 от AGFA !
1) Нет связи с рабочей станцией, врач не может отправить сделанный снимок на принтер.
2) Не изменяется формат плёнки.

Может дрова заново нужно установить?
Но вот, беда: их НЕТ вообще у врачей. Всё перелопатили, не нашли.
Если кому не жалко, скиньте! Буду приМНОГО благодарен.
А вообще, может ещё в чём дело?!
 
DoctorMax Дата: Вторник, 27.Сен.2011, 12:33 | Сообщение # 12

Стажер

лучевой диагност

OFFлайн

Российская Федерация



Волжский

 у меня есть флешка с бэк апом на 5302
 
Senergy Дата: Вторник, 27.Сен.2011, 18:25 | Сообщение # 13

Участник

Инженер по сервису

OFFлайн

Российская Федерация



Казань

 DoctorMax, дык выкладывайте, многие будут РАДЫ такому во время сделанному вниманию!
А мне так, вообще, на радость!
Оценю потом! good
 
DoctorMax Дата: Четверг, 06.Окт.2011, 10:11 | Сообщение # 14

Стажер

лучевой диагност

OFFлайн

Российская Федерация



Волжский

 Извините за долгое молчание, всё выложил: http://depositfiles.com/files/zzaea5wkv
 
DoctorMax Дата: Четверг, 06.Окт.2011, 10:13 | Сообщение # 15

Стажер

лучевой диагност

OFFлайн

Российская Федерация



Волжский

 Люди, а мне надо обновление принтера 5302..olegp писал что у него есть, но на мэйл не отвечает..может еще у кого есть? Проблема та же что описана выше..не видит метку, раскрыто уже пять пачек и все бестолку..помогите…
 
DoctorMax Дата: Суббота, 08.Окт.2011, 22:21 | Сообщение # 16

Стажер

лучевой диагност

OFFлайн

Российская Федерация



Волжский

 Обновление помогло, все здорово теперь…Всем спасибо за помощь..Совсем не трудно оказалось, мастеров дольше ждать..
 
oar Дата: Вторник, 18.Окт.2011, 14:45 | Сообщение # 17

Заглянувший

инженер — радиолог

OFFлайн

Украина



Киев

 Уважаемые коллеги!
Есть ли у Вас коды ошибок AGFA DryStar 5302.
Появилась ошибка Е305007, вероятно, связана с термоголовкой.
Если есть какая-либо информация, относящаяся к даной проблеме, прошу ответить.
Заранее спасибо.
 
olegp Дата: Четверг, 27.Окт.2011, 20:59 | Сообщение # 18

Участник

Инженер

OFFлайн

Российская Федерация



Набережные Челны

 Выложил снова архив SW_2.1.0_C3_DS_Axys_5302_incl_doc 6.0.zip для AGFA DryStar 5302
Нашел таки место для хранения больших файлов с временем хранения 3 и более месяца и автоматическим продлением срока при закачке. Это сервис — «Яндекс.Народ». Не сочтите за рекламу, но в наше хранилище файл не влазит, депозит стирает его через месяц, а гонять регулярно по сети 85,5 Мб — так себе развлечение…
Новая ссылка : http://narod.ru/disk….ip.html
Копия на депозите — http://depositfiles.com/files/3qd3f1hm7

Сообщение отредактировал olegp — Пятница, 28.Окт.2011, 22:25
 
pincher1 Дата: Среда, 23.Ноя.2011, 02:26 | Сообщение # 19

Заглянувший

инженер

OFFлайн

Украина



Horlovka

 Есть firmware 4.2.0 для DryStar 5500 от Agfa. Не знаю в какую тему писать … Очень нужно 4-е прошивка на 5300 и 5302.
Со своей стороны могу поделиться кому нужно.
Заранее спасибо.

Сообщение отредактировал pincher1 — Среда, 23.Ноя.2011, 02:27
 
payback Дата: Среда, 30.Ноя.2011, 19:57 | Сообщение # 20

Стажер

инженер

OFFлайн

Российская Федерация



Воронеж

 Всем привет!
Помогите советом, может кто уже сталкивался с такой проблемой на камере DS5302:
Сначала печатается снимок с томографа, а затем страница в шахматную клеточку с просьбой обратиться в представительство сервисной службы на 9 языках (включая на русском).
Прошивали новый биос, новые настройки с нуля — ничего не помогает (сервисная служба тоже в трансе — такую надпись видят впервые)
Пленка использовалась только AGFA DT 5000 B 100 NIF.

Ошибок в отчете не пишет

Сообщение отредактировал payback — Четверг, 01.Дек.2011, 01:32
 
olegp Дата: Среда, 30.Ноя.2011, 20:32 | Сообщение # 21

Участник

Инженер

OFFлайн

Российская Федерация



Набережные Челны

 Страница в шахматную клетку с градациями серого это стандартный лист калибровки, если это конечно она….
Про надписи на 9-и языках не помню, но этот лист требуется печатать регулярно ( 1-2 раза в год). Делаем её на автомате, даже действий описать не могу, но там на дисплее что-то про неё пишет.
В меню тоже есть печать калибровки… Может вам её как-то принять надо ?
 
payback Дата: Четверг, 01.Дек.2011, 01:31 | Сообщение # 22

Стажер

инженер

OFFлайн

Российская Федерация



Воронеж

 Это не калибровка, как проводится калибровка я знаю.
Фото этой страницы есть, только вот куда прикрепить не знаю
 
olegp Дата: Четверг, 01.Дек.2011, 19:41 | Сообщение # 23

Участник

Инженер

OFFлайн

Российская Федерация



Набережные Челны

 Да я сегодня тоже поглядел на свои калибровки — не то…
А почему вообще решили, что это камера своевольничает, может такое задание с КТ приходит ? Через ВЕБ-интерфейс поглядите задания на камере, может там по 2 листа идёт.
Или попробуйте не с КТ, а со второго рабочего места на камеру бросить что-нибудь…

[p.s.]
Картинка прикрепляется прямо здесь, где новый ответ пишете. Под смайликами есть строка «Прикрепить файл» и поле ввода с кнопкой «Обзор» — вот там…
http://www.medteh.info/sml/girl_flag_of_truce.gif
 
payback Дата: Суббота, 03.Дек.2011, 15:10 | Сообщение # 24

Стажер

инженер

OFFлайн

Российская Федерация



Воронеж

 А у меня под смайликами ничего нет, наверное мало сообщений.

Печатали и с томографа и с EFilma. Все равно — сначала снимок, и сразу за ним тест

Сообщение отредактировал payback — Среда, 07.Дек.2011, 23:00
 
payback Дата: Вторник, 13.Дек.2011, 14:59 | Сообщение # 25

Стажер

инженер

OFFлайн

Российская Федерация



Воронеж

 Новая версия прошивки для Agfa 5302 — SW_2.2.0_C1_DS_Axys_5302
http://narod.ru/disk/33656253001/5302.rar.html

Всем спасибо, сделали!

Сообщение отредактировал payback — Вторник, 13.Дек.2011, 14:59
 
olegp Дата: Вторник, 13.Дек.2011, 19:44 | Сообщение # 26

Участник

Инженер

OFFлайн

Российская Федерация



Набережные Челны

 payback

В смысле, это шахматное поле лечится новой прошивкой ?

Сообщение отредактировал olegp — Вторник, 13.Дек.2011, 19:44
 
FlexLM777 Дата: Четверг, 02.Фев.2012, 19:11 | Сообщение # 27

Стажер

инженер

OFFлайн

Российская Федерация



Старый Оскол

 DrysSar 5302 от Agfa. В нижнем лотке несколько раз застревала плёнка. В обоих случаях выдавалась «ошибка метки». При этом в верхнем лотке механизм захвата плёнки был в нижнем положении. Приходилось либо вручную крутить белый пластиковый шкив с фиксатором для поднятия механизма захвата плёнки (с двумя присосками) для его фиксации в верхнем положении, либо отключать и заново включать принтер. После застревания плёнки принтер отказывался использовать оставшуюся плёнку. Остался белый лист с чипом от демонстационной плёнки. Его и использовал вместо «родного». Работает — проверено!
 
FlexLM777 Дата: Среда, 15.Фев.2012, 21:17 | Сообщение # 28

Стажер

инженер

OFFлайн

Российская Федерация



Старый Оскол

 Принтер DrysSar 5302 от Agfa подключен через hub. В web-браузере по IP-адресу имеется доступ к данному принтеру. Требуется печать снимков через программу eFilm_Workstation_v2.0.1.
В программе eFilm на вкладке DICOM Printer настроены: описание принтера, IP-адрес, порт принтера, параметры пленки. Однако не получается осуществить печать на указанный принтер, т.к. в сетевых установках принтера программы eFilm (меню Printer Setup) его не видно. Может необходима предварительная установка драйвера для принтера на компьютер?
Драйвер для DrysSar 5302 от Agfa отсутствует.
 
Sabres Дата: Среда, 15.Фев.2012, 22:58 | Сообщение # 29

Завсегдатай

US, CT, MRI

OFFлайн

Российская Федерация



NA

 Чего то не хватает в вашем описании, чтобы зацепиться.
Например, когда были подобные проблемы с принтером на АРМ-врача с Vitrea, так там были свои тонкости с забиванием IP-адресов на принт-сервере. (т.е. адреса прописывались и со стороны Vitrea и со стороны мультиформатной камеры). Как кнопка — в Vitrea присутствовал и локальный принтер и сетевой, но вот сетевой как раз-таки не работал. У вас что-то подобное.
На мой взгляд, драйвер на принтер от AGFA не нужен. По крайней мере для принтера от Konica точно нет.

DS — это DryStar от AGFA?

И ещё, речь идёт о принтере, который ранее распечатывал из eFilm или нет?
 
rathome Дата: Четверг, 16.Фев.2012, 01:12 | Сообщение # 30

Участник

Мединженер

OFFлайн

Украина



Винница

 Печатающее устройства под DICOM не обязательно параллельно прописывать.
На стороне принтера от AGFA: AE title, IP адрес, номер порта (у принтера DryStar 5302 от AGFA он стандартный).
На стороне Ефильма те же записанные как и на принтере тайтл, айпи и порт.
Кроме всего прочего размеры пленки, отступы, лоток подачи, тип заполнения края … и т.д.
Это всё.
P.S. Если что, то хост нейм и айпи адрес в ДайКоме одно и тоже.
 
FlexLM777 Дата: Четверг, 16.Фев.2012, 18:23 | Сообщение # 31

Стажер

инженер

OFFлайн

Российская Федерация



Старый Оскол

 Да, DS — это принтер DryStar от фирмы AGFA.
Полная ситуация следующая. DrysSar 5302 от AGFA используется для печати томографических снимков с консолей томографа Aquilion-16 или Vitrea. Все связи в данной сети работают нормально. Дополнительно требуется печать снимков при помощи принтера от AGFA c маммографа МАДИС. Для печати и записи на диск мамо-снимков планируется использовать программу eFilm. Настройки AE title, IP адрес, номер порта в принтере и программе eFilm одинаковые. Но, принтера в программе не видно! Из eFilm никогда не печатали, использовали только для записи результатов на диск.
 
Bomberbug Дата: Четверг, 16.Фев.2012, 19:13 | Сообщение # 32

engineer

OFFлайн

Российская Федерация



Россия

 Вопрос глупый, но все ж — а пингуется принтер нормально?
 
UncleK Дата: Четверг, 16.Фев.2012, 22:17 | Сообщение # 33

Участник

инженер

OFFлайн

Украина



Донецк

 DS5302, Aquilion-16, Vitrea и комп с eFilm должны быть в одной подсети. Иначе нужен не просто хаб, а полноценный маршрутизатор для подмены IP-адресов. Зачем? IMHO проще задать соответствующие IP-адреса на МАДИС-е и машине с eFilm-ом.
 
Bomberbug Дата: Пятница, 17.Фев.2012, 07:47 | Сообщение # 34

engineer

OFFлайн

Российская Федерация



Россия

Quote

DS5302, Aquilion-16, Vitrea и комп с eFilm должны быть в одной подсети

Не обязательно. Можно использовать доп. IP-адрес — будет нормально пинговаться и работать.
 
FlexLM777 Дата: Пятница, 17.Фев.2012, 17:01 | Сообщение # 35

Стажер

инженер

OFFлайн

Российская Федерация



Старый Оскол

 Спасибо всем за помощь в решении проблемы.
Компьютер с eFilm (со своим IP-адресом, но настроен в другой рабочей группе) был подключен в сеть с Aquilion, Vitrea, Agfa. Оказывается совсем не требовалось в меню File выбирать Print Setup. После настройки параметров принтера в eFilm (Свойства, вкладка DICOM Printer) достаточно было в меню File выбрать DICOM Print->Print и выполнить печать на Agfa. Все работает.
 
Bomberbug Дата: Пятница, 17.Фев.2012, 19:24 | Сообщение # 36

engineer

OFFлайн

Российская Федерация



Россия

 Собственно есть такой принтер. Установлена два лотка бумаги — 20х25см пленка и 35х43см.
Через программу ПО Электрона все правильно печатается на соответствующие размеры пленко.
А вот через программу «Интегрис», с аппаратом «Маммо-4МТ», которая идет снимки печатаются только на большом формате 35х43, хотя в настройках принтера выбран формат бумаги 8×10 дюймов (20х25см).

Лоток с большим форматом идет под номером 1 (верхний). Может быть какой-то косяк с ПО «Интегрис» и печать идет с форматом «по-умолчанию» из 1 лотка?

Подскажите че где исправить можно?

P.S. Изначально с оборудованием идет принтер FUJI Drypix 4000 где также есть два разных лотка. Там все четко отрабатывает при печати (правда, там разные лотки со своим AETitle-ом идут). Может быть Интегрис в принципе не умеет обращаться к разным лоткам по одному AETitle (хотя тот же софт Электрона делает это нормально)?
 
FlexLM777 Дата: Суббота, 18.Фев.2012, 18:48 | Сообщение # 37

Стажер

инженер

OFFлайн

Российская Федерация



Старый Оскол

 Принтер Agfa DS5302 сам выбирает лоток с заданным из пользовательской программы форматом пленки (у нас заданы разные AETitle для форматов), т.е. ему неважно в верхнем или нижнем лотке нужный формат. Например, верхний лоток — формат 14х17, а нижний 8х10. Можете поменять местами стопки с пленкой (естественно перенастроив направляющие в лотках) и принтер всеравно напечатает на выбранный формат. Очевидно, проблема в ПО Интегрис.
 
RADIATION Дата: Суббота, 18.Фев.2012, 22:59 | Сообщение # 38

Трудоголик

OFFлайн

Российская Федерация



Центр

 Весёлый в Алтайском крае народ.
Вместо того, чтоб купить плёноку к Фуджи, всю голову сломают себе, как прикрутить Агфу к Интегрису.
Доступно только для пользователей
Привет, Барнаулу!
 
FlexLM777 Дата: Воскресенье, 19.Фев.2012, 08:52 | Сообщение # 39

Стажер

инженер

OFFлайн

Российская Федерация



Старый Оскол

 Как вариант: если Вам необходимо печатать через ПО Интегрис на принтере от AGFA только формат 8х10.
Поместите упаковку с пленкой 8х10 в верхний лоток, а 14х17 — в нижний. Для остального ПО — этот трюк не должен сказаться, а Интегрис, наверное, обратится к верхнему лотку. Только учтите, что при этих манипуляциях с плёнкой принтер DryStar 5302 (с настройками по умолчанию) проведёт новую калибровку плёнки.
 
Bomberbug Дата: Воскресенье, 19.Фев.2012, 19:20 | Сообщение # 40

engineer

OFFлайн

Российская Федерация



Россия

Quote (FlexLM777)

Поместите упаковку с пленкой 8х10 в верхний лоток, а 14х17 — в нижний

О сём «фокусе» я уже подумывал — руки не дошли, но надо проверить.

Quote (FlexLM777)

Принтер Agfa DS5302 сам выбирает лоток с заданным из пользовательской программы форматом пленки (у нас заданы разные AETitle для форматов)

Мануала на АГФУ эту не нашел (где именно опиысывается работа с AETitle-ами) — не поделитесь ли инфой?

Quote (RADIATION)

Вместо того, чтоб купить плёноку к Фуджи

Закупками занимаются отдельные люди и им «виднее» — приходится учитывать реалии жизни и подстраиваться под существующую ситуацию blush

Quote (RADIATION)

Привет, Барнаулу!

Взаимно yes

Сообщение отредактировал Bomberbug — Воскресенье, 19.Фев.2012, 19:21
 
Источник

D

5302 R

RYSTAR

EFERENCE MANUAL

When you load a new film pack, the new Film Identification tag is read and

the tray film format and type are set based upon the info in the Film

Identification tag (RF-tag).

This tag is only readable when the film pack is inserted in the correct way.

There are three possible error messages regarding film identification:

•

No identification code detected

•

Invalid content of Film Identification tag

•

Film overrun from current pack

The following sections describe the solution for each of these problems in

more detail.

No identification code detected

This error message appears when the Film Identification tag is not readable.

There are two possible solutions for this problem:

•

Reload the current film pack or load another film pack

•

Overrule the Film Identification tag of the film pack

To reload the current or another film pack

In case the Drystar 5302 does not start printing after re-inserting a film pack,

1

first check if this film pack is inserted correctly.

If the Drystar 5302 still does not resume printing, the following message will appear:

Remove and re-insert

film pack -including

protective sheet-

properly. follow

loading instructions

188

Troubleshooting

2830A EN 20050526

Источник
  • Page 1
    Technical EALTH Global Services Organisation Documentation Order No.: DD+DIS150.05E DRYSTAR 5302 *1YZO6N1* Type 5366 / 100 1 Piece YZO6N MA1 1st Edition printed in Germany 2005-09-09 Agfa Company Confidential…
  • Page 2
    This page is intentionally left blank to enable print out of even and odd pages on duplex printers.
  • Page 3
    Technical EALTH Global Services Organisation Documentation Order No.: DD+DIS150.05E DRYSTAR 5302 *1YZO6N1* Type 5366/100 1 Piece YZO6N MA1 Edition To order spare parts and Tel.: xx49 — (0)89 — 6207 – 3760 spare part assortments: Fax.: xx49 — (0)89 — 6207 – 7388 To order documentation: Tel.:…

  • Page 4: Table Of Contents

    Pictograms and conventions for this documentation OVERVIEW This documentation uses certain conventions (pictograms, way of writing) for better Order List understanding and faster locating of the required information. Controls, Connections and Set Up Procedures Explanation of the pictograms Functional Description High voltage ! Waiting time Repair and Service…

  • Page 5
    This Generic Safety Directions document comprises the general safety relevant information including relevant environmental and occupational safety instructions for the Service Engineer. It is valid for all Agfa HealthCare Imaging Products and part of each Service Documentation as well as Installation Planning document.
  • Page 6
    Improper operation or service activities may cause damage or injuries. INSTRUCTION: Read the «Generic Safety Directions» document (see MEDNET GSO => General Info => Agfa HealthCare => Publications => Service Manual) prior to attempting any operation, repair or maintenance task on the equipment.

  • Page 7: Accessories

    SAFETY DIRECTIONS FOR REMOTE SERVICE ACTIVITIES ……26 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Generic Safety Directions for HealthCare Imaging Products Page 3 of 07-2009 Agfa Company Confidential…

  • Page 8
    ERASING PROTECTED HEALTH INFORMATION (PHI) ……..28 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Generic Safety Directions for HealthCare Imaging Products Page 4 of 07-2009 Agfa Company Confidential…

  • Page 9: Disclaimer

    Fitters, engineers and other persons who are not employed by or otherwise directly affiliated with or authorized by Agfa HealthCare or one of its affiliates are directed to contact one of the local offices of Agfa HealthCare or one of its affiliates before attempting installation or service procedures.

  • Page 10: Used Icons

    Is additional information without influence on the action or step! DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Generic Safety Directions for HealthCare Imaging Products Page 6 of 07-2009 Agfa Company Confidential…

  • Page 11: Labels

    C&W _005.cdr DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Generic Safety Directions for HealthCare Imaging Products Page 7 of 07-2009 Agfa Company Confidential…

  • Page 12: System Labels Concerning Laser Radiation

    CLASS 2 LASER PRODUCT conditions. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Generic Safety Directions for HealthCare Imaging Products Page 8 of 07-2009 Agfa Company Confidential…

  • Page 13
    CLASS 4 LASER PRODUCT DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Generic Safety Directions for HealthCare Imaging Products Page 9 of 07-2009 Agfa Company Confidential…

  • Page 14: Product Complaints

    Agfa HealthCare must be notified immediately by telephone, fax or written correspondence to the following address: Agfa Service Support — local support addresses and phone numbers listed on: www.agfa.com Agfa – Gevaert N.V.

  • Page 15: Intended Use

    DD+DIS238.06E Generic Safety Directions Intended Use This Agfa HealthCare product should only be operated in a hospital or clinical radiological environment by qualified staff. It must only be operated according to its specifications and its intended use. Any operation not corresponding to the specifications or intended use may result in hazards, which in turn may lead to serious injuries or fatal accidents (for example electric shocks).

  • Page 16: Environmental And Occupational Safety Instructions

    Is obligated to adhere strictly to regulations and instructions. • Shall familiarise himself or herself with the provisions of the Agfa Healthcare Health, Safety and Environment Policy and any specific rules or procedures relating to occupational safety at work and the protection of the environment.

  • Page 17: Connections To Other Equipment

    Changes or additions to the equipment must only be carried out by persons authorized to do so by Agfa HealthCare. Such changes must comply with best engineering practice and all applicable laws and regulations that have the force of law within the jurisdiction of the hospital.

  • Page 18: Accessories And Spare Parts

    • Use only tools and measuring instruments which are suitable for the procedure. • Only approved Agfa HealthCare accessories must be used. For a list of compatible accessories contact your local Agfa HealthCare organization or www.agfa.com. Compliance Directive for HealthCare Imaging Products:…

  • Page 19
    It is a multilateral agreement among participating countries and certification organizations. Agfa has produced a CB test report and claims national certification in all other member countries of the CB Scheme.
  • Page 20
    DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Generic Safety Directions for HealthCare Imaging Products Page 16 of 07-2009 Agfa Company Confidential…

  • Page 21: Safety Directions For Operation

    Accessibility of the mains power switch: CAUTION: Do not obstruct the mains power switch. Position the Agfa HealthCare product so that it is possible to disconnect the mains power connection. • Under certain conditions the Agfa HealthCare product will show a display containing a message.

  • Page 22: Radiation Protection

    Disconnect the power supply from the equipment prior to cleaning the equipment. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Generic Safety Directions for HealthCare Imaging Products Page 18 of 07-2009 Agfa Company Confidential…

  • Page 23: General Safety Directions For Service Activities

    If «Loctite» has to be used to secure screws, this is stated in the text. • Any Agfa service PC or tool which is to be connected via RS232, RJ45, USB or other interface to an Agfa device must not be connected to the mains but must be operated on its internal battery or indirect supply (low voltage).

  • Page 24: Safety Directions For Installation Planning Activities

    Electrical device. Shock possible. INSTRUCTION: • Do not position Agfa EQUIPMENT so it is difficult to operate the disconnection device when an APPLIANCE COUPLER or separable plug is used as isolation. • Local and International wiring regulations must be observed. Check all supplies and voltages, currents, trips and fuses with the Hospital facilities department or their engineers.

  • Page 25
    Hospital management is responsible for the position, location and fixing of all equipment. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Generic Safety Directions for HealthCare Imaging Products Page 21 of 07-2009 Agfa Company Confidential…

  • Page 26: Safety Directions For Installation Activities

    If not otherwise stated, installation and configuration is performed by Agfa HealthCare trained personnel. • If damage of the package is visible from the outside contact your local AGFA representative. • Apart from wearing the required protective clothing, e.g. safety boots and gloves, care must be taken that heavy loads are correctly lifted/carried to avoid injury.

  • Page 27: Safety Directions For Maintenance And Repair Activities

    Safety Directions for Maintenance and Repair Activities • This Technical Documentation identifies the parts on which preventive inspection and maintenance shall be performed by Agfa HealthCare service personnel, including the periods to be applied. • In general the device has to be switched off during service activities. Exception: If the device is switched on to perform tests pay particular attention to any hazards due to moving and rotating parts.

  • Page 28
    NOTE: On MedNet, GSO Library path «General Info => Agfa HealthCare => Publications => Service Manual» a form “IEC 62353:2007 Test Documentation” for CR Digitizers is available, to be handed out to the responsible organization…
  • Page 29
    When cleaning optical elements follow the service manual precisely. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Generic Safety Directions for HealthCare Imaging Products Page 25 of 07-2009 Agfa Company Confidential…

  • Page 30: Safety Directions For Remote Service Activities

    DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Generic Safety Directions for HealthCare Imaging Products Page 26 of 07-2009 Agfa Company Confidential…

  • Page 31: Generic Safety Directions For Healthcare Imaging Products

    The Recycling Passports are meant to be used as information for waste treatment partners and companies that want to recycle end-of-life Agfa equipment. To get a copy of the required Agfa HealthCare Recycling Passport please contact your local Sales organization.

  • Page 32: Waste Disposal

    For more detailed information about take-back and recycling of this product, please contact your local Agfa service organization. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.

  • Page 33
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 1 / I 2005-09-09 (Type 5366/100)

  • Page 35: General Safety Instructions

    ⇒ The DRYSTAR 5302 is suitable for continuous operation. ⇒ The DRYSTAR 5302 enables or helps in the diagnosis of a patient. When operating or maintaining the DRYSTAR 5302 always observe the following safety guidelines: • Have electrical or mechanical defects repaired by skilled personnel only! •…

  • Page 36
    Agfa recommends to have DRYSTAR film waste hauled away by a licensed company. After its life span, do not dispose of the DRYSTAR 5302 without consideration of local waste disposal regulations. Please consult your local service organization.

  • Page 37: Installation Checklist

    • to give an overview of all steps, that are required for the installation of the printer; • to provide a reference to the corresponding section of the «Drystar 5302 Plug & Play Installation Manual» (abbreviated: P&P) and «Controls, Connections and Set Up Procedure» section where the topics are further explained.

  • Page 38
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 1 / 4 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential…

  • Page 39: Printer Installation Wizard

    ROUTER IP-ADDRESS A more detailed description of the CALLED AE_TITLE Hostname printer Installation Wizard is available Domain name in the Drystar 5302 Reference Daily used modality name Brand Manual in section ‘Using the Modality Type installation wizard’. CALLING AE_TITLE(‘modality name’)

  • Page 40
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 1 / 6 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential…
  • Page 41
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 1 / 7 2005-09-09 (Type 5366/100)

  • Page 42: Printer Settings

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 1 / 8 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential…

  • Page 43
    DD+DIS150.05E Controls, Connections and Set Up Procedures Example browser Welcome to this screen: DryStar 5302 printer Key-Operator — Change Image quality settings Default film calibration Macbeth TR924 Default Densitometer Gretag X-Rite 301 X-Rite 310 Accept changes Discard changes Reset Values…

  • Page 44: Default Densitometer

    The default densitometer menu is accessible via key-operator menu on the keypad and key-operator menu via browser. Example browser Welcome to this screen: DryStar 5302 printer Key-Operator — Change Image quality settings Default film calibration Macbeth TR924 Default Densitometer Gretag…

  • Page 45: Film View

    Normal The film view menu is accessible via key-operator menu on the keypad and key-operator menu via browser. Example browser Welcome to this screen: DryStar 5302 printer Key-Operator — Change input tray settings Upper input tray Normal Film view Back 14×17″…

  • Page 46: Beep On Empty Tray

    Audible alarm on — beep 5 times The ‘beep on empty tray’ menu is accessible via key-operator menu on the keypad and key-operator menu via browser. Example browser Welcome to this screen: DryStar 5302 printer Key-Operator — Change general settings Date: 2004 Oct. Time:…

  • Page 47: Rf Tag

    The ‘RF-tag’ menu is accessible via service command session via browser only. Example browser Welcome to this screen: DryStar 5302 printer Service — Change input tray settings If RF-tag is missing or malfunctioning Printing with Dmax=2.00 Printing not possible Upper input tray…

  • Page 48: Site Data

    Note: It is mandatory to fill in site data. Otherwise after each switch on / reboot of the printer a hint is displayed to enter the site data. Example browser Welcome to this screen: DryStar 5302 printer Key-Operator — Change general settings Date: Oct. 2004…

  • Page 49: Film Calibration

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 1 / 15 2005-09-09 (Type 5366/100)

  • Page 50: Printer — Modality Connection

    Browser pages Modality set-up Let the modality be set-up ate the modality. Tell the modality service engineer following printer parameters • Printer Type (Agfa Drystar 5302) • IP address • AE-title • Available film formats Printed copies of this document are not controlled.

  • Page 51: Logical Printers Set-Up

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 1 / 17 2005-09-09 (Type 5366/100)

  • Page 52: Printing Of Diagnostic And / Or Test Images

    DSA images shall be printed with linear taste LUT. Problem: The workstation at the PACS system has one AE title. The Drystar 5302 does not recognize, for which type of modality (CR or CT) the user wants to print. Solution: •…

  • Page 53: Image Adjustments

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 1 / 19 2005-09-09 (Type 5366/100)

  • Page 54: Image Adjustment At The Modality

    Drystar 4500 (M), Drystar 5500 or Drystar 5300 only, this can also be used for Drystar 5302. The Drystar 5302 behavior is with some exceptions the same as the behavior of the other printers mentioned above. Main differences: •…

  • Page 55
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 1 / 21 2005-09-09 (Type 5366/100)
  • Page 56
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 1 / 22 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential…

  • Page 57: Basic Image Adjustment At The Printer Via Key-Operator Menu

    Figure 18 • Dmax 3.20 Example browser screen: Welcome to this Welcome to this DryStar 5302 printer DryStar 5302 printer Key-Operator — Change Image quality settings Key-Operator — Change Image quality settings Select kanamori like value: Daily used name CT2_ARC…

  • Page 58
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 1 / 24 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential…
  • Page 59
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 1 / 25 2005-09-09 (Type 5366/100)

  • Page 60: Alternative: Image Settings Via Dicom Host Profile

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 1 / 26 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential…

  • Page 61: Acceptance Test

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 1 / 27 2005-09-09 (Type 5366/100)

  • Page 62: Completion Of Installation

    Refer to User or Reference Manual ..Switching on the printer: Warm up time 7 min. User manual: «Switching on the Drystar 5302» Switching off the printer. It can take up to 20 User Manual: «Switching off secs. until the printer switches off the Drystar 5302″…

  • Page 63: Backup Of Printer Settings

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 1 / 29 2005-09-09 (Type 5366/100)

  • Page 64
    This page is intentionally left blank to enable print out of even and odd pages on duplex printers.
  • Page 65
    06-2009 Updated technical data in table, where different Drystar printers are compared. See section 2.1. • Updated table with detailed comparison of Drystar 5302 with Drystar Axys: Added new functions of software 2.0.0_C2. See section 2.2. • Updated table with overview of calibrations.

  • Page 66: Order List

    Improper operation or service activities may cause damage or injuries. INSTRUCTION: Read the «Generic Safety Directions» document (see MEDNET GSO => General Info => Agfa HealthCare => Publications => Service Manual) prior to attempting any operation, repair or maintenance task on the equipment.

  • Page 67
    LIST OF CONTENTS INTRODUCTION ……………………4 COMPARISON TO OTHER AGFA B&W PRINTERS …………..5 Technical Data compared to Drystar 5300 and Drystar 5503 ……….5 Detailed Comparison Drystar 5302 – Drystar Axys …………..6 FILM RUN……………………..7 Backside Printing Recognition ………………..13 Left / Right Shift Print Algorithm………………..14 CALIBRATIONS ……………………16…

  • Page 68: Introduction

    DX-S Printer Ultrasound Service Host Figure 1: Typical network installation of a Drystar 5302 DOCUMENT CONTROL NOTE: The controlled versi on of this document resides on MedNet. Any printed copy of this document is uncontrolled Edition 1, Revision 1 DRYSTAR 5302…

  • Page 69: Comparison To Other Agfa B&W Printers

    DD+DIS150.05E Functional Description Comparison to other AGFA B&W Printers Technical Data compared to Drystar 5300 and Drystar 5503 Technical Drystar 5302 Drystar 5300 Drystar 5503 Specification (SW Rel. 2.0) (SW Rel. 2.1) (SW Rel. 6.0) 90 kg 55 kg 193 kg Weight 75/h (14×17″)

  • Page 70: Detailed Comparison Drystar 5302 — Drystar Axys

    DD+DIS150.05E Functional Description Detailed Comparison Drystar 5302 – Drystar Axys The design of the Drystar Axys is based on the Drystar 5302 printer. This section shows the differences in detail. Main hardware differences: Hardware Drystar 5302 Drystar Axys Reason for Difference…

  • Page 71: Film Run

    Figure 3: Pump & Valves Module DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 2 / 7 06-2009 Type 5366/100 Agfa Company Confidential…

  • Page 72
    Figure 5: Gear Box Module DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 2 / 8 06-2009 Type 5366/100 Agfa Company Confidentia…
  • Page 73
    Figure 7: Cam drive DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 2 / 9 06-2009 Type 5366/100 Agfa Company Confidential…
  • Page 74
    Figure 9: Drum Drive DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 2 / 10 06-2009 Type 5366/100 Agfa Company Confidentia…
  • Page 75
    Figure 11: Print Drum DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 2 / 11 06-2009 Type 5366/100 Agfa Company Confidential…
  • Page 76
    Figure 13: Output Module DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 2 / 12 06-2009 Type 5366/100 Agfa Company Confidentia…

  • Page 77: Backside Printing Recognition

    Figure 14: Backside printing recognition DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 2 / 13 06-2009 Type 5366/100 Agfa Company Confidential…

  • Page 78: Left / Right Shift Print Algorithm

    The clear left and right borders are influenced by this shift mechanism but they are within specification. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 2 / 14 06-2009 Type 5366/100 Agfa Company Confidentia…

  • Page 79
    Figure 16: Left / right shift print algorithm DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 2 / 15 06-2009 Type 5366/100…

  • Page 80: Calibrations

    DD+DIS150.05E Functional Description Calibrations The following table lists the different Drystar 5302 calibrations: Characteristic TH profile Film Smart Profile Compliance Film Film printed To determine new To reduce vertical To measure the film Equalization of TH Make film calibration Purpose of the…

  • Page 81: Modules

    This section lists the different printer modules (= spare parts). Figure 17: Printer Modules DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chap ter 2 / 17 06-2009 Type 5366/100…

  • Page 82
    DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 2 / 18 06-2009 Type 5366/100 Agfa Company Confidentia…

  • Page 83: Hardware

    RS232 service port DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 2 / 19 06-2009 Type 5366/100 Agfa Company Confidential…

  • Page 84
    DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 2 / 20 06-2009 Type 5366/100 Agfa Company Confidentia…

  • Page 85: Modules And E-Labels

    Figure 19: Example for E-Label at Power Supply DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 2 / 21 06-2009 Type 5366/100…

  • Page 86
    Figure 20: Example for E-Label content DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 2 / 22 06-2009 Type 5366/100 Agfa Company Confidentia…

  • Page 87: Diagnostic Software

    Operating System 536602aa.cdr Figure 21 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 2 / 23 06-2009 Type 5366/100 Agfa Company Confidential…

  • Page 88
    536602af.cdr Figure 22 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 2 / 24 06-2009 Type 5366/100 Agfa Company Confidentia…

  • Page 89: Thermal Model

    Parameter X Figure 23 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 2 / 25 06-2009 Type 5366/100 Agfa Company Confidential…

  • Page 90
    This page is intentionally left blank to enable print out of even and odd pages on duplex printers.
  • Page 91
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 DRYSTAR 5302 Chapter 3.1 / I 2005-09-09 (Type 5366/100)

  • Page 93: Machine Specific Safety Equipment, Precautions And Hints

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 DRYSTAR 5302 Chapter 3.1 / 1 2005-09-09 (Type 5366/100)

  • Page 94: Safety Switch

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.1 / 2 DRYSTAR 5302 Edition 1, Revision 0 Agfa Company Confidential…

  • Page 95: Guidelines Regarding Safety During Service Work

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 DRYSTAR 5302 Chapter 3.1 / 3 2005-09-09 (Type 5366/100)

  • Page 96: Safety Guidelines Regarding Service Pc Connection

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.1 / 4 DRYSTAR 5302 Edition 1, Revision 0 Agfa Company Confidential…

  • Page 97: Safety Check Upon Completion Of The Repair Work

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 DRYSTAR 5302 Chapter 3.1 / 5 2005-09-09 (Type 5366/100)

  • Page 98: Electrical Check

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.1 / 6 DRYSTAR 5302 Edition 1, Revision 0 Agfa Company Confidential…

  • Page 99: Electrical Check According To National Regulations

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 DRYSTAR 5302 Chapter 3.1 / 7 2005-09-09 (Type 5366/100)

  • Page 100
    This page is intentionally left blank to enable print out of even and odd pages on duplex printers.
  • Page 101
    «Error — System Failure» state…………..52 Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/I 2005-09-09 (Type 5366/100)

  • Page 103: Machine Specific Tools

    D200-2. Other densitometers are not supported. Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/1 2005-09-09 (Type 5366/100)

  • Page 104: Optional Tools

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.2/2 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)

  • Page 105: Minimum Configuration Of The Service Pc

    Agfa Intranet – IT helpdesk — GICS Intranet — Infrastructure Standards — Agfa standards for PCs, laptops, printers, organizers, mobiles,… For employees not directly working at Agfa — and so not getting the service PC directly from GICS, we recommend to use the minimum configuration of the Service PC mentioned above as a guideline regarding PC hardware and software.

  • Page 106: Software Tools

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.2/4 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)

  • Page 107: Infocounter

    (1) The Key-operator menu is also available via the Web pages NOTES (username: drystar, password: 5302). (2) For a complete description of the Key-operator functions, please refer to the DRYSTAR 5302 Reference manual. An overview of all key-operator menus is available in section 3.7, ‘Software menus, Settings’. Infocounter…

  • Page 108
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.2/6 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)

  • Page 109: Infocounter Analysis Via Printers Infocounters Report

    Repair and Service DD+DIS150.05E Machine specific tools, software tools and auxiliary means Welcome to this DryStar 5302 printer SERVICE TOOLS HOME General information List of errors Printer Infocounters report DICOM, LPD and HIPAA report QA Report Page Software versions Remote sessions…

  • Page 110: Infocounter Analysis Via Service Command Session

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.2/8 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)

  • Page 111
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/9 2005-09-09 (Type 5366/100)

  • Page 112: Test Images

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.2/10 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)

  • Page 113: Testimage Sti1

    Figure 6 Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/11 2005-09-09 (Type 5366/100)

  • Page 114
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.2/12 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)

  • Page 115: Testimage Sti2

    Figure 8 Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/13 2005-09-09 (Type 5366/100)

  • Page 116: Testimage Smpte

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.2/14 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)

  • Page 117
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/15 2005-09-09 (Type 5366/100)

  • Page 118: Testimage Medical_Image

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.2/16 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)

  • Page 119: Testimage Lincheck

    CDM is measuring. Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/17 2005-09-09 (Type 5366/100)

  • Page 120: Show Error Codes

    Possibility 2: View all error codes: (1) In the browser pages select menu ‘Service Engineer Tools — List of errors’ Web Pages The web pages provide for following menus: Welcome to this DryStar 5302 printer Operator tools Key-operator tools Service engineer tools Specialist tools…

  • Page 121: Operator Tools

    2.5.5 for two examples about the usage of the webpages Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/19 2005-09-09 (Type 5366/100)

  • Page 122
    Repair and Service Machine specific tools, software tools and auxiliary means DD+DIS150.05E 2.5.1 Operator Tools Welcome to this DryStar 5302 printer Operator — Printer Status HOME Id Patient Name Host Created On Sent Status Priority Printing Normal CT_A 16-02-2005 Printing…

  • Page 123: Key-Operator Tools

    Repair and Service DD+DIS150.05E Machine specific tools, software tools and auxiliary means 2.5.2 Key-Operator Tools Welcome to this DryStar 5302 printer KEY OPERATOR TOOLS HOME Remote sessions Enter key-operator command session Release remote command session Figure 16 Main Purpose Provides same functions like Key-Operator…

  • Page 124: Service Engineer Tools

    Repair and Service Machine specific tools, software tools and auxiliary means DD+DIS150.05E 2.5.3 Service Engineer Tools Welcome to this DryStar 5302 printer SERVICE TOOLS HOME General information List of errors Printer Infocounters report DICOM, LPD and HIPAA report QA Report Page…

  • Page 125
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/23 2005-09-09 (Type 5366/100)
  • Page 126
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.2/24 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)

  • Page 127: Connection To The Web Pages

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/25 2005-09-09 (Type 5366/100)

  • Page 128
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.2/26 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)
  • Page 129
    Figure 24 Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/27 2005-09-09 (Type 5366/100)
  • Page 130
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.2/28 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)

  • Page 131: Usage Of The Web Pages

    Adapt the taste LUT for a certain host by creating a 2.5.5.1 host specific DICOM host profile Adapt the annotations for all DICOM inputs 2.5.5.2 Welcome to this DryStar 5302 printer Operator tools Key-operator tools Service engineer tools Specialist tools Security Tools…

  • Page 132
    Whenever the host with AE title ‘CTSCAN200’ sends a print job to the printer, the taste LUT shall be adapted to ‘Kanamori_like 200’. In the printer homepage select Welcome to this ‘Service Engineer tools — Enter DryStar 5302 printer service command session’ SERVICE TOOLS Enter username and password HOME General information Select ‘DICOM profile editor’…
  • Page 133
    Figure 30 Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/31 2005-09-09 (Type 5366/100)
  • Page 134
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.2/32 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)
  • Page 135
    Figure 31 Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/33 2005-09-09 (Type 5366/100)
  • Page 136
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.2/34 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)
  • Page 137
    Joseph’s Hospital..’ Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/35 2005-09-09 (Type 5366/100)
  • Page 138
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.2/36 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)

  • Page 139: Printer Logging

    (select all files) / 2 Infocounters report – To this computer Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/37 2005-09-09 (Type 5366/100)

  • Page 140
    A session file is named e.g. DS5302_1052_SES_21OCT2005_09-55-48.ZIP, where the different figures represent following information: DS5302: Printer (Drystar 5302) 1052: Serial Number SES: Session File 21OCT2005: Current date 09-55-48: Current time HH-MM-SS Interesting for troubleshooting are following files within the SES files: •…

  • Page 141: Printer Bootup-Message

    Instead of the HyperTerminal following other programs can be recommended to connect to terminal level: • xt.exe is an AGFA program, which is part of the IMOS package. It can be started in a DOS box by typing ‘xt’ •…

  • Page 142
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.2/40 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)
  • Page 143
    Figure 41 Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/41 2005-09-09 (Type 5366/100)
  • Page 144
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.2/42 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)

  • Page 145: Advp

    Figure 45 Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/43 2005-09-09 (Type 5366/100)

  • Page 146: Advp As Dicom Print Scu

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.2/44 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)

  • Page 147
    ‘Start Controller’. Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/45 2005-09-09 (Type 5366/100)

  • Page 148: Advp As Communication Recorder

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.2/46 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)

  • Page 149
    Recorder Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/47 2005-09-09 (Type 5366/100)
  • Page 150
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.2/48 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)

  • Page 151: Software Installation

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/49 2005-09-09 (Type 5366/100)

  • Page 152: Software Update Via Cf Card

    During file upload it is not checked, whether the software you are uploading is really software for Drystar 5302. Be sure to upload the correct ZIP file. The ZIP file is only available via MEDNET — GSO library — Hardcopy – Dry Imagers –…

  • Page 153: Emergency Sw Installation On A New, Empty Hard Drive

    Figure 53 Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/51 2005-09-09 (Type 5366/100)

  • Page 154: Emergency Sw Installation On A Printer In «Error — System Failure» State

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.2/52 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)

  • Page 155
    (default IP address 169.254.10.10) Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.2/53 2005-09-09 (Type 5366/100)
  • Page 156
    This page is intentionally left blank to enable print out of even and odd pages on duplex printers.
  • Page 157
    ► Referenced Documents Document Title DD+DIS261.10E DRYSTAR 5302 SIB16: Software 2.1.0_C2 available DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 03-2011 printed in Germany…

  • Page 158: Maintenance

    Improper operation or service activities may cause damage or injuries. INSTRUCTION: Read the «Generic Safety Directions» document (see MEDNET GSO => General Info => Agfa HealthCare => Publications => Service Manual) prior to attempting any operation, repair or maintenance task on the equipment.

  • Page 159
    ERROR CATALOGUE………………….5 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 3 of 72 03-2011 Type 5366/100 Agfa Company Confidential…

  • Page 160: General Troubleshooting Procedure

    Figure 1 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 4 of 72 03-2011 Type 5366/100 Agfa Company Confidential…

  • Page 161
    VILIS COOLING FAN DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 5 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 162
    Tag reader DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 6 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 163
    Part MOD01 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 7 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 164
    Emergency sw install without preserving config DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 8 of 72 03-2011 Type 5366/100…
  • Page 165
    Part MOD01 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 9 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 166
    Replace filmpack DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 10 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 167
    Perform lower tray calibration DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 11 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 168
    Replace filmpack when filmcount runs out DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 12 of 72 03-2011 Type 5366/100…
  • Page 169
    DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 13 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 170
    Remove upper input jam DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 14 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 171
    Remove upper input jam DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 15 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 172
    Part MOD03 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 16 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 173
    Part MOD03 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 17 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 174
    Part MOD03 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 18 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 175
    Remove lower input jam DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 19 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 176
    Remove lower input jam DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 20 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 177
    Remove lower input jam DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 21 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 178
    Part MOD04 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 22 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 179
    Remove wrinkled film DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 23 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 180
    Part MOD04 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 24 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 181
    Part MOD04 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 25 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 182
    Cure6 Replace DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 26 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 183
    Part MOD05 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 27 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 184
    Part MOD05 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 28 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 185
    Connect connector P2 on TH DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 29 of 72 03-2011 Type 5366/100…
  • Page 186
    Part MOD05 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 30 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 187
    Part MOD05 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 31 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 188
    Part MOD05 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 32 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 189
    Remove film jam DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 33 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 190
    Remove film jam DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 34 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 191
    Part MOD06 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 35 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 192
    Replace CDM module MOD06 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 36 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 193
    Part MOD06 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 37 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 194
    Part MOD06 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 38 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 195
    Part MOD06 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 39 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 196
    Part MOD07 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 40 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 197
    Part MOD07 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 41 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 198
    Part MOD08 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 42 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 199
    Part MOD08 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 43 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 200
    Part MOD08 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 44 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 201
    Part MOD08 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 45 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 202
    Part MOD09 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 46 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 203
    Part MOD09 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 47 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 204
    Call service DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 48 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 205
    Defect CPU on MOD12 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 49 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 206
    Part MOD08 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 50 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 207
    Part MOD08 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 51 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 208
    Part MOD08 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 52 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 209
    Part MOD08 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 53 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 210
    Part MOD12 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 54 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 211
    Part MOD12 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 55 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 212
    Part MOD09 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 56 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 213
    Cool down the PSU DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 57 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 214
    Part MOD09 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 58 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 215
    Part MOD10 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 59 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 216
    Connect XS5 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 60 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 217
    Remove jam DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 61 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 218
    Part MOD13 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 62 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 219
    Part MOD13 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 63 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 220
    Remove internal jam DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 64 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 221
    Part MOD14 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 65 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 222
    Self resolving accident DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 66 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 223
    Part MOD15 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 67 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 224
    Part MOD15 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 68 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 225
    Part MOD12 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 69 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 226
    Part MOD17 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 70 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 227
    Part MOD17 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 71 of 72 03-2011 Type 5366/100 Agfa Company Confidential…
  • Page 228
    Check other active HC-codes to get detailed info DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.3 / 72 of 72 03-2011 Type 5366/100…
  • Page 229
    DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 08-2008 printed in Germany Document Node ID: 16179549 eq_03-3_troubleshooting_e_template_v05 Agfa Company Confidential Copyright © 2008 Agfa HealthCare N.V.
  • Page 230
    Troubleshooting intentionally left blank DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.3 / 2 08-2008 Type 5366/100 Agfa Company Confidential…
  • Page 231
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.4 / I 2005-09-09 (Type 5366/100)

  • Page 233: Codings

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.4 / 1 2005-09-09 (Type 5366/100)

  • Page 234: Jumper Setting 73 Gb Hitachi Hard Disk

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.4 / 2 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential…

  • Page 235: Fuses

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.4 / 3 2005-09-09 (Type 5366/100)

  • Page 236: Themis Board (Plugged Into The Devil Board)

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.4 / 4 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential…

  • Page 237: Power Supply

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.4 / 5 2005-09-09 (Type 5366/100)

  • Page 238: Front Panel

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 3.4 / 6 Drystar 5302 Edition 1, Revision 0 Agfa Company Confidential…

  • Page 239: Rear Panel

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 Drystar 5302 Chapter 3.4 / 7 2005-09-09 (Type 5366/100)

  • Page 240
    This page is intentionally left blank to enable print out of even and odd pages on duplex printers.
  • Page 241
    04-2011 Replaced instructions by references to enclosure documents. DOCUMENT CONTROL NOTE: The controlled version of this document resides on the Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 04-2011 printed in Germany Document Node ID: 32917123…
  • Page 242
    To verify the latest version of single documents and of Service Manuals refer to the Document Type ‘Order List’ in the Agfa HealthCare Library. DOCUMENT CONTROL NOTE: The controlled version of this document resides on the Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.5 / 2…
  • Page 243
    DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 05-2009 printed in Germany Document Node ID: 27648461 eq_03-6_adjustments_e_template_v07 Agfa Company Confidential Copyright © 2009 Agfa HealthCare N.V.
  • Page 244
    Improper operation or service activities may cause damage or injuries. INSTRUCTION: Read the «Generic Safety Directions» document (see MEDNET GSO => General Info => Agfa HealthCare => Publications => Service Manual) prior to attempting any operation, repair or maintenance task on the equipment.
  • Page 245
    Basic Rules for the TH Cleaning Procedure …………….34 Resistor Check……………………35 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 3 05-2009 Type 5366/100 Agfa Company Confidential…

  • Page 246: Adjustments

    It can be performed at any film size. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 4 05-2009 Type 5366/100…

  • Page 247
    Measure the left clear border width: Value: Value: via local display via Browser User Interface: Measure left white border Welcome to this 0.0 mm DryStar 5302 Measure right white border Service — Calibration 0.0 mm Horizontal alignment Left white border (mm) (mm)

  • Page 248: Calibrations

    Afssaps / EUREF calibration procedure. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 6 05-2009 Type 5366/100 Agfa Company Confidential…

  • Page 249: Film Calibration

    (default = ON)». Also the calibration frequency (Default = every 5 film packs) can be entered there. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 7 05-2009 Type 5366/100 Agfa Company Confidential…

  • Page 250
    3.05 O.D. 2.88 O.D. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 8 05-2009 Type 5366/100 Agfa Company Confidential…

  • Page 251: Cdm (Internal Densitometer) Calibration

    Perform a density reproduction check. See 3.1. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 9 05-2009 Type 5366/100…

  • Page 252
    Repair and Service DD+DIS150 .05E Adjustments and Calibrations Welcome to this Welcome to this DryStar 5302 printer DryStar 5302 printer Service — Calibration Service — Calibration Internal Densitometer Calibration Film Calibration Select Densitometer Internal Densitometer Calibration Print Head Calibration Macbeth TR924…

  • Page 253: Print Head (Th) Calibration

    Follow the instructions on the WebPages. Refer to Figure 4. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 11 05-2009 Type 5366/100…

  • Page 254
    Repair and Service DD+DIS150 .05E Adjustments and Calibrations Welcome to this Welcome to this DryStar 5302 printer DryStar 5302 printer Service — Calibration Service — Calibration Thermal Printhead Calibration Film Calibration Select Densitometer Internal Densitometer Calibration Thermal Print Head Calibration…

  • Page 255: Smart Profile Calibration

    66 densities have to be measured and to be entered in the browser screen. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 13 05-2009 Type 5366/100…

  • Page 256
    Workaround to avoid entering all data again: Press the “back button” in the browser. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 14 05-2009 Type 5366/100…
  • Page 257
    Repair and Service DD+DIS150.05E Adjustments and Calibrations Welcome to this Welcome to this DryStar 5302 printer DryStar 5302 printer Service — Calibration Service — Calibration Smart Profile Calibration Film Calibration Select Densitometer Internal Densitometer Calibration Print Head Calibration Macbeth TR924…
  • Page 258
    The smart profile calibration is performed. Result DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 16 05-2009 Type 5366/100 Agfa Company Confidential…

  • Page 259: Compliance Film Calibration As Part Of Afssaps / Euref Calibration Procedure

    European Reference Organisation for Quality Assured Breast Screening and Diagnostic Services 1) The compliance film calibration is only Prerequiste available for DRYSTAR 5302 software ≥ 2.0.0_C1. 2) A “TG18-PQC modified 4” image has to be available on the modality. The Test Pattern can be downloaded from http://www.euref.org/.

  • Page 260
    60 to 120 min. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 18 05-2009 Type 5366/100 Agfa Company Confidential…
  • Page 261
    Repair and Service DD+DIS150.05E Adjustments and Calibrations Overview of the Afssaps / EUREF calibration procedure: DRYSTAR 5302 calibration procedure for Afssaps/EUREF Check calibration of densitometer. Details see section 2.5.1. Perform densitometer Densitometer calibration acc. to densitometer calibration ok? manufacturer instructions.

  • Page 262: Checking The Densitometer Calibration

    (EB+72010270 or commercially available) is required. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 20 05-2009 Type 5366/100…

  • Page 263: Resetting The Compliance Film Calibration, Internal Densitometer Calibration And Thermal Print Head Calibration

    2.3 Print Head (TH) Calibration DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 21 05-2009 Type 5366/100 Agfa Company Confidential…

  • Page 264
    (4) Select “Accept changes”. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 22 05-2009 Type 5366/100 Agfa Company Confidential…
  • Page 265
    Repair and Service DD+DIS150 .05E Adjustments and Calibrations Welcome to this Welcome to this DryStar 5302 printer DryStar 5302 printer Service — Calibration Service — Calibration Internal Densitometer Calibration Film Calibration Select Densitometer Internal Densitometer Calibration Print Head Calibration Macbeth TR924…
  • Page 266
    (5) Repeat the print head calibration, if films of width 10” and 14” are available. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 24 05-2009 Type 5366/100…
  • Page 267
    Repair and Service DD+DIS150.05E Adjustments and Calibrations Welcome to this Welcome to this DryStar 5302 printer DryStar 5302 printer Service — Calibration Service — Calibration Thermal Printhead Calibration Film Calibration Select Densitometer Internal Densitometer Calibration Thermal Print Head Calibration Macbeth TR924…

  • Page 268: Performing A Density Reproduction Check

    Reproduction is ok or not. In case it is not ok you are requested to carry out a CDM calibration. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 26 05-2009 Type 5366/100 Agfa Company Confidential…

  • Page 269: Performing The Afssaps / Euref Calibration Check

    (2) Connect the printer network cable to the network outlet at the wall. (3) Consult the “connectivity release document” for the modality connection to DRYSTAR 5302 for the proper modality configuration to print the “TG18-PQC modified 4” test image. (4) Print the “TG18-PQC modified 4” test image from the modality.

  • Page 270: Performing A Compliance Film Calibration

    Workaround to avoid entering all data again: Press the “back button” in the browser. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 28 05-2009 Type 5366/100…

  • Page 271
    ≥ 10%, start the complete procedure from scratch. Refer to section 2.5. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 29 05-2009 Type 5366/100…
  • Page 272
    Reset values Figure 18 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 30 05-2009 Type 5366/100 Agfa Company Confidential…

  • Page 273: Checks

    Excel file. See Figure 19. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 31 05-2009 Type 5366/100 Agfa Company Confidential…

  • Page 274: Check For Dust Stripes / Tph Cleaning Procedure

    Check the films for dust stripes as described in the flowchart of Figure 20. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 32 05-2009 Type 5366/100 Agfa Company Confidential…

  • Page 275
    536736mm.cdr Figure 20 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 33 05-2009 Type 5366/100 Agfa Company Confidential…

  • Page 276: Basic Rules For The Th Cleaning Procedure

    DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 34 05-2009 Type 5366/100…

  • Page 277: Resistor Check

    Figure 22: Print Head resistor check test film DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 35 05-2009 Type 5366/100…

  • Page 278
    This page is intentionally left blank to enable print out of even and odd pages on duplex printers.
  • Page 279
    DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 06-2009 printed in Germany Document Node ID: 27681930 eq_03-7_menus-setting_e_template_v07 Agfa Company Confidential Copyright © 2009 Agfa HealthCare N.V.
  • Page 280
    Improper operation or service activities may cause damage or injuries. INSTRUCTION: Read the «Generic Safety Directions» document (see MEDNET GSO => General Info => Agfa HealthCare => Publications => Service Manual) prior to attempting any operation, repair or maintenance task on the equipment.
  • Page 281
    KEY-OPERATOR BROWSER PAGES ………………7 SERVICE BROWSER PAGES ………………..11 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.7 / 3 06-2009 5366/100 Agfa Company Confidential…

  • Page 282: Printer Controls

    Section Constant Error status Troubleshooting DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.7 / 4 06-2009 5366/100 Agfa Company Confidential…

  • Page 283: Controls At The Local Keypad

    Press and hold down an arrow key to scroll quickly through a list or a menu. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.7 / 5 06-2009 5366/100 Agfa Company Confidential…

  • Page 284: Key-Operator Menu Via Local Keypad

    Figure 1: Tree structure of the key-operator menu at the local keypad DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.7 / 6 06-2009 5366/100…

  • Page 285: Key-Operator Browser

    Repair and Service DD+DIS150.05E Software Menus, Settings Key-Operator Browser Pages This section displays the key-operator browser pages. Welcome to this DryStar 5302 printer Prompt Enter Password Operator tools drystar Key-operator tools ****** Service engineer tools Cancel Specialist tools Security Tools…

  • Page 286
    Repair and Service DD+DIS150.05E Software Menus, Settings Welcome to this Welcome to this DryStar 5302 printer DryStar 5302 printer Key-Operator — Show settings Key-Operator — Change settings General General Input tray Input tray See page 9. Network (DICOM) Network (DICOM)
  • Page 287
    Repair and Service DD+DIS150 .05E Software Menus, Settings Welcome to this Welcome to this DryStar 5302 printer DryStar 5302 printer Key-Operator — Change input tray settings Key-Operator — Change general settings Date: 2004 Oct. Upper input tray Time: Normal Film view…
  • Page 288
    Repair and Service DD+DIS150 .05E Software Menus, Settings Welcome to this 2.4.1 Welcome to this DryStar 5302 printer DryStar 5302 printer Key-Operator — Change Image quality settings Key-Operator — Print image 1. Ktbwd2n.zip Default film calibration 2. smpte_kan.zip 3. smpte_l300.zip 4.

  • Page 289: Service Browser

    Repair and Service DD+DIS150.05E Software Menus, Settings Service Browser Pages This section displays the service browser pages. Welcome to this DryStar 5302 printer Operator tools Prompt Enter Password Key-operator tools mega Service engineer tools ****** Specialist tools Cancel Security Tools…

  • Page 290
    Repair and Service DD+DIS150.05E Software Menus, Settings INFO COUNTER drystar 5302 LIST OF ERRORS 1. Site and system info: MODULE : devilmodule ———————— Elabel : Yes Date: 18-Nov-2007 Time: 12:42:15 HC207000 : devilmodule.dsh.connected *TypeDefect 1.1 Device info: *Context207000 —————- *ActionSeeManual…
  • Page 291
    Figure 8: Service tool details (part 2) DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.7 / 13 06-2009 5366/100 Agfa Company Confidential…
  • Page 292
    Figure 9: Service tool details (part 3) DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.7 / 14 06-2009 5366/100 Agfa Company Confidential…
  • Page 293
    Figure 10: Service tool details (part 4) DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.7 / 15 06-2009 5366/100 Agfa Company Confidential…
  • Page 294
    Figure 11: Service tool details (part 5) DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.7 / 16 06-2009 5366/100 Agfa Company Confidential…
  • Page 295
    Figure 12: Service tool details (part 6) DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.7 / 17 06-2009 5366/100 Agfa Company Confidential…
  • Page 296
    The Printer Front End receives printjobs from a network (DICOM LPD) or any proprietary interface ERROR PSCodec PSCodec (de)codes postscript/pdf files ERROR FontRI ERROR Mfx is an Agfa communication protocol to interchange printer status messages MfxPrinterInfoHandler ERROR Raster ERROR OverlayOpImage OverlayOpImage implements the operation to put an overlay above the source image.
  • Page 297
    The red marked areas in Figure 14 represent the different modules listed in the left navigation pane. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.7 / 19 06-2009 5366/100 Agfa Company Confidential…
  • Page 298
    Repair and Service DD+DIS150.05E Software Menus, Settings Welcome to this DryStar 5302 printer Operator tools Prompt Enter Password Key-operator tools mega Service engineer tools ****** Specialist tools Cancel Security Tools HELP Welcome to this DryStar 5302 printer Welcome to this…
  • Page 299
    Repair and Service DD+DIS150 .05E Software Menus, Settings Welcome to this Welcome to this DryStar 5302 printer DryStar 5302 printer Service — Restore configuration Service — Save configuration General General Network only Network only Go back Go back Welcome to this…
  • Page 300
    Repair and Service DD+DIS150.05E Software Menus, Settings Welcome to this Welcome to this DryStar 5302 printer DryStar 5302 printer Service — Change general settings Service — Change network settings (dicom) Date: Oct. 2004 Network settings Time: Remove modality Add modality…
  • Page 301
    Repair and Service DD+DIS150.05E Software Menus, Settings Welcome to this Welcome to this DryStar 5302 printer DryStar 5302 printer Service — Installation Service — Installation Before install. New Software Installation please make backup Printer Installation Wizard Install Site Data OK, make backup…
  • Page 302
    This page is intentionally left blank to enable print out of even and odd pages on duplex printers.
  • Page 303
    Referenced Documents Document Title DD+DIS037.11E DRYSTAR 5302 SB20, Software 2.1.0_C3 available to solve Warning Message “RF Tag Problem“: Update of affected Printers required DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
  • Page 304
    Improper operation or service activities may cause damage or injuries. INSTRUCTION: Read the «Generic Safety Directions» document (see MedNet GSO => General Info => Agfa HealthCare => Publications => Service Manual) prior to attempting any operation, repair or maintenance task on the equipment.
  • Page 305
    SOFTWARE RELEASE 2.1.0_C2 ………………21 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.8 / 3 Agfa Company Confidential 03-2011 Type 5366/100…
  • Page 306
    New Feature of Software 2.1.0_C3 ………………22 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.8 / 4 Agfa Company Confidential 03-2011…

  • Page 307: Software Release 1.8.0_C1

    Only Microsoft Internet Explorer 5.5 or higher is usable as browser application. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.8 / 5 Agfa Company Confidential 03-2011…

  • Page 308: Known Problems

    *O.D. = Optical Density Software fault Cause DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.8 / 6 Agfa Company Confidential 03-2011 Type 5366/100…

  • Page 309: New Feature

    Table 1: Languages for Operator and Key-Operator Screens DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.8 / 7 Agfa Company Confidential 03-2011…

  • Page 310: Software Release 1.8.1_C1

    DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.8 / 8 Agfa Company Confidential 03-2011 Type 5366/100…

  • Page 311: Software Release 1.9.0_C2

    As of software 1.9.0_C2 the key-operator screens are available in English language only. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.8 / 9 Agfa Company Confidential 03-2011 Type 5366/100…

  • Page 312: Software Release 1.9.0_C3

    It does not contain bugfixes of problems that may occur in the field. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.8 / 10 Agfa Company Confidential 03-2011…

  • Page 313: Software Release 1.9.0_C4

     On MedNet, GSO Library always the latest available software release can be downloaded. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.8 / 11 Agfa Company Confidential 03-2011 Type 5366/100…

  • Page 314: Solved Software Bugs

    Software fault in software 1.9.0_C3 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.8 / 12 Agfa Company Confidential 03-2011 Type 5366/100…

  • Page 315: Software Release 1.9.1_C1

    The force for driving the film towards the thermal head is sporadically too low. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.8 / 13 Agfa Company Confidential 03-2011…

  • Page 316
    Example for film calibration film see Figure 2. Figure 2 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.8 / 14 Agfa Company Confidential 03-2011 Type 5366/100…

  • Page 317: Software Release 1.9.2_C1

    CPU Driver problem Cause DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.8 / 15 Agfa Company Confidential 03-2011 Type 5366/100…

  • Page 318: New Feature

    ≥ 1.9.2_C1 already accepts ISO RF tags. Figure 3 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 3.8 / 16 Agfa Company Confidential 03-2011 Type 5366/100…

  • Page 319: Software Release 2.0.0_C2

    New Features Software 2.0.0_C2 contains following new features:  Software supports both printers, DRYSTAR 5302 and DRYSTAR AXYS.  Support of 14 bit contrast resolution (instead of 12 bit)  Improved RF-tag locking mechanism (identical to RF-tag locking mechanism of DRYSTAR 550X software 6.0)

  • Page 320: Solved Bug In Software 2.0.0_C2

    CPU Driver problem Cause Solution Install software 2.0.0_C2 to prevent the problem. NOTE: For DRYSTAR 5302 software patch 1.9.2_C1 solved already most cases of the problems. Symptom 2 Infocounter data and E-Label data sporadically do not match. E-Label and Infocounter synchronization problem Cause Install software 2.0.0_C2.

  • Page 321: Known Software Issue

    Repair and Service DD+DIS150.05E Software Releases and Patches Symptom 3 Some DRYSTAR 5302 printers sporadically print films partially only, especially with high workload: The rest of the film is gray. Data underrun due to a software problem Cause Install software 2.0.0_C2.

  • Page 322: Software Release 2.0.0_C3

    Compared to software 2.0.0_C2 the RF tag locking mechanism is further improved. This supports a reliable detection of falsely inserted films. NOTE: Software 2.1.0_C2 supports DRYSTAR 5302 and DRYSTAR AXYS. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.

  • Page 323: Software Release 2.1.0_C2

    Prerequisites None * SNs of additional DRYSTAR 5302 printers with SW 2.1.0_C2 ex factory: 11538, 12095, 12099, 12102, 12103, 12105, 12108, 12111, 12113, 12118, 12122, 12125, 12126, 12128, 12132, 12136, 12139, 12144, 12149, 12151, 12152, 12156, 12158, 12161, 12163, 12164, 12167, 12168, 12169, 12170, 12178, 12181,…

  • Page 324
    This is a solution for the warning message “RF Tag Problem” after 10 printed films of a new film pack. For details see DRYSTAR AXYS SB 15 / DRYSTAR 5302 SB 20, Software 2.1.0_C3 available to solve Warning Message “RF Tag Problem“ after 10 printed Films of a new Film Pack, DD+DIS037.11E…
  • Page 325
    DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 08/2008 printed in Germany Document Node ID: 26032589 eq_03-9_faq_e_template_v05 Agfa Company Confidential Copyright © 2008 Agfa HealthCare N.V.
  • Page 326
    FAQ — Frequently Asked Questions intentionally left blank DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.9 / 2 08/2008 Type 5366/100 Agfa Company Confidential…
  • Page 327
    RAM) and new Type of Hard Disk (SATA) introduced DOCUMENT CONTROL NOTE: The controlled version of this document resides on the Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 03-2011 printed in Germany…
  • Page 328
    To verify the latest version of single documents and of Service Manuals refer to the Document Type ‘Order List’ in the Agfa HealthCare library. DOCUMENT CONTROL NOTE: The controlled version of this document resides on the Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302…
  • Page 329
    List of Components ……………………7 WIRING DIAGRAMS ……………………9 DOCUMENT CONTROL NOTE: The controlled version of this document resides on the Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 4 / 3…
  • Page 330
    536604aa_1.cdr RF2 in Upper Tray Figure 1 DOCUMENT CONTROL NOTE: The controlled version of this document resides on the Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 4 / 4…
  • Page 331
    SN 3177, SN 3180, SN 3494 to SN 3537, SN 3539, SN 3574, SN 3672 Figure 2 DOCUMENT CONTROL NOTE: The controlled version of this document resides on the Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 4 / 5…
  • Page 332
    ≥ 12610 536604aa_2.cdr Figure 3 DOCUMENT CONTROL NOTE: The controlled version of this document resides on the Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 4 / 6 03-2011 Type 5366/100…
  • Page 333
    RF tag reader upper tray Figure 1 DOCUMENT CONTROL NOTE: The controlled version of this document resides on the Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 4 / 7…
  • Page 334
    Figure 2 Vacuum valve upper magazine Figure 2 DOCUMENT CONTROL NOTE: The controlled version of this document resides on the Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302 Chapter 4 / 8…

  • Page 335: Wiring Diagrams

    Wiring Diagram Upper Pickup Assembly (Diagram 8/9) Wiring Diagram Upper Tray Assembly (Diagram 9/9) DOCUMENT CONTROL NOTE: The controlled version of this document resides on the Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 1 DRYSTAR 5302…

  • Page 336
    03-2011 Edition 1, Revision 1 Document Node ID: 19886546…
  • Page 337
    & 7+(50$/ +($’ $66< $ 1$,6 $*; $ 1$,6 $*; 26+ $ 0DWVXVKLWD 0DWVXVKLWD 6HQVRU6 ((6;3 2YHUKHDW ;6D;6 6HQVRU6 &$%/(‘ +($7(5 )2,/ (/( VHQVRU ;6D;6 ‘(93 ;6D;6 ‘(93 %8(, ‘(93 %8(, 6 6 ;6D ;6E ,QSXW VHQVRU 73+ ,QSXW VHQVRU 73+ PP LVRODWLRQ FOHDU PP LVRODWLRQ FOHDU 7KHUPDO 3ULQW +HDG…
  • Page 338
    & /DVW 00 &LUFXLW ;6;6;6 ;6;6;6 %802’8B,, 6702’8B,, )LUVW &LUFXLW ;6 ;6D ;6;6 66 000 ‘(93 66 6666 000 ‘(93 ;6;6;6 ‘(93 666666 ;6;6;6 ‘(93 666666 ;6;6;6 ‘(93 666666 ;6;6;6 $ 3,&.83 &$%/( ‘(93 666666 %802’8B,, 6702’8B,, /RZHUB38,)( ‘(93 ,)( ,)( :,5,1*B’,$*5$03 /RZHUB38,)( ‘(93 ,)( ,)( …
  • Page 339
    & ((6;3 6HQVRU6 66 ;6;6;6 ;6;6;6 ;6;6;6 %8(, /RZHU PDJD]LQH HPSW GHWHFWLRQ ;6 ;6D ;6;6 5) 5) 5)67 666 ‘(93 ;6;6;6 666 ‘(93 :,5,1*B’,$*5$02 ;6;6;6 666 ‘(93 ;6;6;6 5)5)67 ‘(93 <( 5) ;6;6;6 5)5)67 ‘(93 ;6;6;6 5)5)67 ‘(93 670260’ <( <( $ %8…
  • Page 340
    & RXWSXW 26+ ;6E;6 ;6E;6 ;6E;6 %8(, RXWSXW 2XWSXW VHQVRU 73+ ((6;3 ;6E;6 ;6E;6 ;6E;6 %8(, 2XWSXW UROOHUV KRPH SRVLWLRQ RXWSXW &DEOHG PRWRU 9’& RXWSXW &DEOHG PRWRU 9’& ;6E ;6D ;6E;6 6 ‘(93 ;6E;6 ;6E;6 6 ‘(93 ;6E;6 67(, 6 ‘(93 67(, 6…
  • Page 341
    & RXWSXW 26+ ;6E;6 ;6E;6 ;6E;6 %8(, RXWSXW 2XWSXW VHQVRU 73+ ((6;3 ;6E;6 ;6E;6 ;6E;6 %8(, 2XWSXW UROOHUV KRPH SRVLWLRQ RXWSXW &DEOHG PRWRU 9’& RXWSXW &DEOHG PRWRU 9’& ;6E ;6D ;6E;6 6 ‘(93 ;6E;6 ;6E;6 6 ‘(93 ;6E;6 67(, 6 ‘(93 67(, 6…
  • Page 342
    & ;6E ;6 ‘(93 :,5,1*B’,$*5$03 ‘(93 %80,1,),7-5 9DFXXP SXPS 9DFXXP SXPS ;6D ;6E ;6 ;6 0UG ‘(93 0EN ‘(93 9 ‘(93 :,5,1*B’,$*5$03 9 ‘(93 *< 9 ‘(93 9 ‘(93 670,1,),7-5 %80,1,),7-5 $ 3803 9$/9(6 $66< &$%/( /RZHU PDJD]LQH YDFXXP YDOYH /RZHU PDJD]LQH YDFXXP YDOYH 8SSHU PDJD]LQH YDFXXP YDOYH 8SSHU PDJD]LQH YDFXXP YDOYH…
  • Page 343
    & /DVW &LUFXLW %80 00 ;6;6;6 ;6;6;6 %802’8B,, )LUVW &LUFXLW 6702’8B,, ;6 ;6D ;6;6 000 ‘(93 66 %866 6666 000 ‘(93 ;6;6;6 ‘(93 666666 ;6;6;6 ‘(93 666666 ;6;6;6 ‘(93 666666 $ 3,&.83 &$%/( ;6;6;6 666666 ‘(93 %802’8B,, 6702’8B,, 8SSHUB38,)( ‘(93 :,5,1*B’,$*5$03 8SSHUB38,)( ‘(93…
  • Page 344
    & ((6;3 6HQVRU6 66 ;6;6;6 ;6;6;6 ;6;6;6 %8(, 8SSHU PDJD]LQH HPSW GHWHFWLRQ ;6 ;6D ;6;6 $ $ 666 ‘(93 :,5,1*B’,$*5$02 666 ‘(93 5) 5) 5)67 666 ‘(93 ;6;6;6 5)5)67 ‘(93 :,5,1*B’,$*5$02 ;6;6;6 5)5)67 ‘(93 ;6;6;6 5)5)67 ‘(93 <( <( <( 5) ;6;6;6 5)5)67…
  • Page 345
    Use, dissemination, distribution or reproduction of this document by unauthorized personnel is not permitted and may be unlawful. DOCUMENT CONTROL NOTE: The controlled version of this document resides on Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Document Node ID: 16880214…
  • Page 346
    To verify the latest version of single documents and of Service Manuals refer to the Document Type ‘Order List’ in the Agfa HealthCare Library. DOCUMENT CONTROL NOTE: The controlled version of this document resides on Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Drystar 5302…
  • Page 347
    If your equipment contains removable batteries or accumulators please dispose of these separately according to local regulations. DOCUMENT CONTROL NOTE: The controlled version of this document resides on Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Drystar 5302…
  • Page 348
    ENTRAÎNEMENT / MODULE DE PUISSANCE PAGES 12 — 15 5366_chap05_index_m.CDR DOCUMENT CONTROL NOTE: The controlled version of this document resides on Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Drystar 5302 Chapter 5 / 4…
  • Page 349
    DOCUMENT CONTROL NOTE: The controlled version of this document resides on Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Drystar 5302 Chapter 5 / 5…
  • Page 350
    (MOD 10) (MOD 02) 5366_chap05_01_m.CDR COVERS DOCUMENT CONTROL NOTE: The controlled version of this document resides on Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Drystar 5302 Chapter 5 / 6 09-2011 Type 5366/100…

  • Page 351: Dd+Dis050.05M

    99 = Spare Part is not shown in Exploded Views. RF+: Refurbished Spare Parts COVERS DOCUMENT CONTROL NOTE: The controlled version of this document resides on Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Drystar 5302 Chapter 5 / 7…

  • Page 352: Drive

    (MOD 13) (MOD 14) 5366_chap05_02_m.CDR DRIVE DOCUMENT CONTROL NOTE: The controlled version of this document resides on Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Drystar 5302 Chapter 5 / 8 09-2011 Type 5366/100…

  • Page 353: Document Control Note

    99 = Spare Part is not shown in Exploded Views. RF+: Refurbished Spare Parts DRIVE DOCUMENT CONTROL NOTE: The controlled version of this document resides on Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Drystar 5302 Chapter 5 / 9…

  • Page 354
    (MOD 17) (MOD 07) 5366_chap05_03_m.CDR DRIVE LEFT DOCUMENT CONTROL NOTE: The controlled version of this document resides on Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Drystar 5302 Chapter 5 / 10 09-2011…
  • Page 355
    99 = Spare Part is not shown in Exploded Views. RF+: Refurbished Spare Parts DRIVE LEFT DOCUMENT CONTROL NOTE: The controlled version of this document resides on Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Drystar 5302 Chapter 5 / 11…
  • Page 356
    5366_chap05_04_m.CDR DRIVE / POWER UNIT — UP TO SN12609 DOCUMENT CONTROL NOTE: The controlled version of this document resides on Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Drystar 5302 Chapter 5 / 12…
  • Page 357
    RF+: Refurbished Spare Parts DRIVE / POWER UNIT — UP TO SN12609 DOCUMENT CONTROL NOTE: The controlled version of this document resides on Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Drystar 5302…
  • Page 358
    5366_chap05_05_m.CDR DRIVE / POWER UNIT — FROM SN12610 DOCUMENT CONTROL NOTE: The controlled version of this document resides on Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Drystar 5302 Chapter 5 / 14…
  • Page 359
    RF+: Refurbished Spare Parts DRIVE / POWER UNIT — FROM SN12610 DOCUMENT CONTROL NOTE: The controlled version of this document resides on Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Drystar 5302 Chapter 5 / 15…

  • Page 360: Power Unit

    Gear Box Belt 5366_chap05_05_m.CDR POWER UNIT DOCUMENT CONTROL NOTE: The controlled version of this document resides on Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Drystar 5302 Chapter 5 / 16 09-2011…

  • Page 361
    99 = Spare Part is not shown in Exploded Views. RF+: Refurbished Spare Parts POWER UNIT DOCUMENT CONTROL NOTE: The controlled version of this document resides on Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Drystar 5302 Chapter 5 / 17…
  • Page 362
    Spare Part Kit CM+053660100733 Drystar 5302 Sortiment M DOCUMENT CONTROL NOTE: The controlled version of this document resides on Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Drystar 5302 Chapter 5 / 18…
  • Page 363
    Order Number Accessory MOBILE KIT EX2DV DOCUMENT CONTROL NOTE: The controlled version of this document resides on Agfa HealthCare Library. Any printed copy of this document is uncontrolled. Edition 1, Revision 3 Drystar 5302 Chapter 5 / 19 09-2011 Type 5366/100…
  • Page 364
    This page is intentionally left blank to enable print out of even and odd pages on duplex printers.
  • Page 365
    DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 0 05-2008 printed in Germany Document Node ID: 13939365 eq_08_modifications_e_template_v07 Agfa Company Confidential Copyright © 2008 Agfa HealthCare N.V.
  • Page 366
    Improper operation or service activities may cause damage or injuries. INSTRUCTION: Read the «Generic Safety Directions» document (see MEDNET GSO => General Info => Agfa HealthCare => Publications => Service Manual) prior to attempting any operation, repair or maintenance task on the equipment.
  • Page 367
    Upper Tray Module CM+349267.0 and Lower Tray Module 349266.0 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 0 DRYSTAR 5302 Chapter 8 / 3 Agfa Company Confidential 05-2008 Type 5366/100…
  • Page 368
    SB No. 03, DD+DIS403.05E DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 0 DRYSTAR 5302 Chapter 8 / 4 Agfa Company Confidential 05-2008 Type 5366/100…
  • Page 369
    Troubleshooting Guide DD+DIS211.07E Document(s) DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 0 DRYSTAR 5302 Chapter 8 / 5 Agfa Company Confidential 05-2008 Type 5366/100…
  • Page 370
    Number(s) Referenced None Document(s) DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 0 DRYSTAR 5302 Chapter 8 / 6 Agfa Company Confidential 05-2008 Type 5366/100…
  • Page 371
    Number(s) None Referenced Document(s) DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 0 DRYSTAR 5302 Chapter 8 / 7 Agfa Company Confidential 05-2008 Type 5366/100…
  • Page 372
    • Troubleshooting Guide DD+DIS211.07E DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 0 DRYSTAR 5302 Chapter 8 / 8 Agfa Company Confidential 05-2008 Type 5366/100…
  • Page 373
    Part Power Supply Module (RoHS) CM+349278.1 Number(s) Referenced None Document(s) Changed Gear Box Module (MOD14) CM+349269.2 in combination with DRYSTAR 5302 software patch 1.8.1_C1 Reason Improvement of film run SN ≥ 2175 / October 2006 Product(s) & Serial Number(s) Part Gear box module CM+349269.3…
  • Page 374
    Number(s) Referenced None Document(s) DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 0 DRYSTAR 5302 Chapter 8 / 10 Agfa Company Confidential 05-2008 Type 5366/100…
  • Page 375
    Number(s) Referenced None Document(s) DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 0 DRYSTAR 5302 Chapter 8 / 11 Agfa Company Confidential 05-2008 Type 5366/100…
  • Page 376
    SB No. 06, DD+DIS064.07E Document(s) DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 0 DRYSTAR 5302 Chapter 8 / 12 Agfa Company Confidential 05-2008 Type 5366/100…
  • Page 377
    Number(s) Referenced None Document(s) DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 0 DRYSTAR 5302 Chapter 8 / 13 Agfa Company Confidential 05-2008 Type 5366/100…

  • Page 378: Spare Parts

    Number(s) Referenced None Document(s) DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 0 DRYSTAR 5302 Chapter 8 / 14 Agfa Company Confidential 05-2008 Type 5366/100…

  • Page 379
    Number(s) Referenced None Document(s) DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 0 DRYSTAR 5302 Chapter 8 / 15 Agfa Company Confidential 05-2008 Type 5366/100…
  • Page 380
    Upper Pickup Modification Kit” Enclosure DD+DIS399.07E DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 0 DRYSTAR 5302 Chapter 8 / 16 Agfa Company Confidential 05-2008…
  • Page 381
    Maintenance EALTH Global Services Organisation Order-No.: DD+DIS149.05E *1YZO5L1* DRYSTAR 5302 Type 5366/100 1 Piece YZO5L MA1 Edition 1, Revision 0 The Maintenance document is separately available. Order No: DD+DIS149.05E Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
  • Page 382
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 9 DRYSTAR 5302 Edition 1, Revision 0 Agfa Company Confidential (Type 5366/100)
  • Page 383
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 DRYSTAR 5302 Chapter 9 / I 2005-09-09 (Type 5366/100)
  • Page 384
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 9 / II DRYSTAR 5302 Edition 1, Revision 0 Agfa Company Confidential…

  • Page 385: Safety

    ⇒ The DRYSTAR 5302 is suitable for continuous operation. ⇒ The DRYSTAR 5302 enables or helps in the diagnosis of a patient. When operating or maintaining the DRYSTAR 5302 always observe the following safety guidelines: • Have electrical or mechanical defects repaired by skilled personnel only! •…

  • Page 386
    Agfa recommends to have DRYSTAR film waste hauled away by a licensed company. After its life span, do not dispose of the DRYSTAR 5302 without consideration of local waste disposal regulations. Please consult your local service organization.

  • Page 387: Introduction

    • Gretag D200-2 Flash light commercially available Loop 8x CM+9.9579.9904.0 Service PC with Drystar 5302 Density For Service PC specifications refer to Reproduction Check files chapter 3.2, Tools. Density reproduction check files are available via MEDNET, GSO Library Waterproof pen…

  • Page 388: Required Cleaning Material

    Case of Exchange/ Usage Air Filter CM+343350.X Exchange each maintenance Always have the latest Drystar 5302 software patches available on the Service PC. Depending of the urgency and classification of a software patch it might be necessary to update the printer software.

  • Page 389: Diagnostics

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 DRYSTAR 5302 Chapter 9 / 5 2005-09-09 (Type 5366/100)

  • Page 390: Infocounter Analysis

    Maintenance DD+DIS149.05E Welcome to this DryStar 5302 printer SERVICE TOOLS HOME General information List of errors Printer Infocounters report DICOM, LPD and HIPAA report QA Report Page Software versions Remote sessions Show printer status Enter key-operator command session Enter service command session…

  • Page 391: Infocounter Analysis Via Service Command Session

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 DRYSTAR 5302 Chapter 9 / 7 2005-09-09 (Type 5366/100)

  • Page 392
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 9 / 8 DRYSTAR 5302 Edition 1, Revision 0 Agfa Company Confidential…

  • Page 393: Image Quality Check

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 DRYSTAR 5302 Chapter 9 / 9 2005-09-09 (Type 5366/100)

  • Page 394: Maintenance Points — Power Off

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 9 / 10 DRYSTAR 5302 Edition 1, Revision 0 Agfa Company Confidential…

  • Page 395: Cleaning Of Electronics Compartment

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 DRYSTAR 5302 Chapter 9 / 11 2005-09-09 (Type 5366/100)

  • Page 396: Cleaning Of Power Supply Air Inlet

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 9 / 12 DRYSTAR 5302 Edition 1, Revision 0 Agfa Company Confidential…

  • Page 397: Cleaning Of Thermal Print Head

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 DRYSTAR 5302 Chapter 9 / 13 2005-09-09 (Type 5366/100)

  • Page 398: Basic Protective Earth Test

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 9 / 14 DRYSTAR 5302 Edition 1, Revision 0 Agfa Company Confidential…

  • Page 399: Electrical Check According To National Regulations

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 DRYSTAR 5302 Chapter 9 / 15 2005-09-09 (Type 5366/100)

  • Page 400: Maintenance Points — Power On

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 9 / 16 DRYSTAR 5302 Edition 1, Revision 0 Agfa Company Confidential…

  • Page 401: Film Calibration

    Ds5302 density reproduction check DT2C.xls These Excel files can be downloaded from MedNet, download area ‘GSO library — Hardcopy — Dry Imagers — Drystar 5302 — Freeware’. Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.

  • Page 402
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 9 / 18 DRYSTAR 5302 Edition 1, Revision 0 Agfa Company Confidential…

  • Page 403: Test Image Evaluation

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 DRYSTAR 5302 Chapter 9 / 19 2005-09-09 (Type 5366/100)

  • Page 404: Host System Image Quality Check

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 9 / 20 DRYSTAR 5302 Edition 1, Revision 0 Agfa Company Confidential…

  • Page 405: Customer Conversation

    (3) Select ‘y’ for yes at each desired ‘Reset Item’ (4) Select «Accept Changes». Refer to Figure 21 (5) When leaving the Service menu select «Preventive maintenance» as service action. Welcome to this DryStar 5302 printer Service — Service actions Reset Item Factory Active…

  • Page 406
    AGFA and the Agfa-Rhombus are trademarks of Agfa-Gevaert AG, Germany Herausgegeben von / Published by / Edité par / Agfa-Gevaert AG Fototechnik Tegernseer Landstraße 161 D — 81539 München Printed in Germany / Imprimé en Allemagne Agfa Company Confidential…
  • Page 407
    Maintenance EALTH Global Services Organisation Checklist Order-No.: DD+DIS149.05E DRYSTAR 5302 Type 5366/100 Work Instruction for order no. Film cycles The maintenance has to be carried out: Every 12 months or 25 000 printed films Maintenance must be carried out according to the maintenance instructions DD+DIS149.05E.
  • Page 408
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Maintenence Checklist Page 2 / 4 DRYSTAR 5302 Edition 1, Revision 0 Agfa Company Confidential…

  • Page 409: Check Of Safety Switches

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 DRYSTAR 5302 Maintenence Checklist Page 3 / 4 2005-09-09…

  • Page 410
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Maintenence Checklist Page 4 / 4 DRYSTAR 5302 Edition 1, Revision 0 Agfa Company Confidential…
  • Page 411
    DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 0 Document Node ID: 23532484 03-2008 printed in Germany service_bulletin_cover_e_template_v01 Agfa Company Confidential Copyright © 2008 Agfa HealthCare N.V.
  • Page 412
    Service Bulletins intentionally left blank DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 0 Drystar 5302 Chapter 10 / 2 Agfa Company Confidential 03-2008 Type 5366/0100…
  • Page 413
    Use, dissemination, distribution or reproduction of this document by unauthorized personnel is not permitted and may be unlawful. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. 12-2007 printed in Germany Document Node ID: 15602908 eq_11_install-planning_e_template_v04 Agfa Company Confidential Copyright © 2007 Agfa HealthCare N.V.
  • Page 414
    Improper operation or service activities may cause damage or injuries. INSTRUCTION: Read the «Generic Safety Directions» document (see MEDNET GSO => General Info => Agfa HealthCare => Publications => Service Manual) prior to attempting any operation, repair or maintenance task on the equipment.
  • Page 415
    Referenced Documents Document Title n.a. n.a. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 11 / 3 12-2007 5366/100 Agfa Company Confidential…
  • Page 416
    Sound emission data ………………….24 Interface data ……………………..24 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 11 / 4 12-2007 5366/100 Agfa Company Confidential…
  • Page 417
    SAFETY STANDARDS AND REGULATIONS ……………26 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 11 / 5 12-2007 5366/100 Agfa Company Confidential…

  • Page 418: Installation Planning Checklist

    Page installation conditions are fulfilled. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 11 / 6 12-2007 5366/100 Agfa Company Confidential…

  • Page 419: System Overview

    Figure 1 Device Comment Modality The modality has to support the DICOM print protocol DRYSTAR 5302 Dry printer for 14×17″, 14×14″, 14×11″, 10×12″, 8×10″ DT2 blue base or clear base films NOTE: Remark to an installation in a ‘HIPAA conform environment’:…

  • Page 420: Scope Of Delivery And Accessories

    ABC Code EQOZV Scope of delivery • 1 Basic DRYSTAR 5302 including: — 2 input trays adjustable for all film sizes — 1 output tray • 1 Compact Flash card (stored in backup CF card slot in input tray) • 2 power cables, 3 m long (Europe / US) •…

  • Page 421: Options

    In general it is possible to diagnose and repair the printer to a certain extent remotely. To enable remote service of the printer remote access has first to be organized. Remote Access is established via the Agfa own Secure Remote Service System (SRSS).

  • Page 422: Machine Dimensions

    536611jp.cdr Figure 4 Figure 5 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 11 / 10 12-2007 5366/100 Agfa Company Confidential…

  • Page 423: Minimum Free Space For Operation And Maintenance

    90 kg (198 lb) DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 11 / 11 12-2007 5366/100 Agfa Company Confidential…

  • Page 424: System Integration

    DICOM Version 3.0; FTP, Telnet, HTTP, SNMP, SMTP Image formats DICOM DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 11 / 12 12-2007 5366/100 Agfa Company Confidential…

  • Page 425
    CT images shall be printed with linear taste LUT. Problem: The workstation at the PACS system has one AE title only. The DRYSTAR 5302 does not recognize, for which type of modality (CR or CT) the user wants to print.

  • Page 426: Modality Setup Parameters

    Modality type …………….Modality AE_title …………….DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 11 / 14 12-2007 5366/100 Agfa Company Confidential…

  • Page 427
    Not all modalities that are tested for Drystar 4500 (M)/5500/5300 are also tested for Drystar 5302. As the controller part for all printers is identical, except behaviour regarding film sizes and output tray, modalities that are tested for Drystar 4500 (M)/5500/5300 can also be connected to Drystar 5302.

  • Page 428: Setup Of Security And Privacy (Optional)

    Network password: min. 4 characters, max 10 characters User name Password DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 11 / 16 12-2007 5366/100 Agfa Company Confidential…

  • Page 429
    Network password: min. 4 characters, max 10 characters Specialist name Password DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 11 / 17 12-2007 5366/100 Agfa Company Confidential…

  • Page 430: Service Host Parameters

    NOTE: • Agfa devices which are according to the HIPAA specifications have Agfa certificates already loaded. • All certificates issued by Agfa have a validity period of 10 years Service Host Parameters NOTE: The AGFATEK LINK Service Host is optional in the network.

  • Page 431: Example For System Integration

    Printer AE Title: Domain name: Figure 8 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 11 / 19 12-2007 5366/100 Agfa Company Confidential…

  • Page 432: Ambient Conditions

    Relative humidity during transport: max.: DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 11 / 20 12-2007 5366/100 Agfa Company Confidential…

  • Page 433: Electrical Connections

    DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 11 / 21 12-2007 5366/100 Agfa Company Confidential…

  • Page 434: Electrical Connections At The Printer

    536611JM.cdr Figure 10 Specifications Type overview Printer Type DRYSTAR 5302 5366/100 DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 11 / 22…

  • Page 435: Functional Data

    9.2.1 Pixel Matrices The DRYSTAR 5302 has two film supply trays that can be configured to 14×17″, 14×14″, 14×11″, 10×14″ or 8×10″ film size. If trim is used around the images (trim is a small, white frame around each image on the film), the diagnostic area is 6 pixels smaller at each edge of the film.

  • Page 436: Electrical Data

    Module exchange concept Remote/preventive service capable DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 11 / 24 12-2007 5366/100 Agfa Company Confidential…

  • Page 437
    Printer with packing incl. palette (kg / lb) DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 DRYSTAR 5302 Chapter 11 / 25 12-2007 5366/100…
  • Page 438
    GB9254-1998 (Class A) • GB17625.1-2003 The DRYSTAR 5302 carries the FCC ID: HPL5366, CE, TUV, cULus and CCC label. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2…
  • Page 439
    INSTALLATION SITE EALTH READINESS CHECKLIST Imaging Services Name of Field Service Engineer: _________________ Checking date:____________ Client name: ___________________________________________________________ Client address: __________________________________________________________ __________________________________________________________ Contact person, name and title: ___________________________________________________________ Client phone number: ________________________ Extension:_________________ Type of systems: ___________________ Order /OGT number: _____________________ Item Refer to okay…
  • Page 440
    Tegernseer Landstraße 161 D — 81539 München Germany AGFA and the Agfa-Rhombus are trademarks of Agfa HealthCare N.V. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Agfa Company Confidential…

  • Page 441: Glossary And Key Word Index

    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 DRYSTAR 5302 Chapter 12 / I 2005-09-09 (Typ 5366/100)

  • Page 443
    Glossary 2-Propanol (Isopropyl Alcohol used for cleaning purposes. alcohol) Agfa Diagnostic Center. A device developed by AGFA to scan X-ray exposed phosphor plates. AE-Title Application Entity Title. A DICOM capable device in the network is unambiguously identified by its IP address, hostname and AE-Title .
  • Page 444
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 12 / 2 DRYSTAR 5302 Edition 1, Revision 0 Agfa Company Confidential…
  • Page 445
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 DRYSTAR 5302 Chapter 12 / 3 2005-09-09 (Type 5366/100)
  • Page 446
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 12 / 4 DRYSTAR 5302 Edition 1, Revision 0 Agfa Company Confidential…
  • Page 447
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Edition 1, Revision 0 DRYSTAR 5302 Chapter 12 / 5 2005-09-09 (Type 5366/100)
  • Page 448
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 12 / 6 DRYSTAR 5302 Edition 1, Revision 0 Agfa Company Confidential…
  • Page 449
    (= provider), makes printing of DICOM images possible. A device using DICOM PMS (= user) can control a DICOM printer. Drystar 5300 is a DICOM PMS provider. AGFA own operating system for medical Portex devices. Imperative programming language for the…
  • Page 450
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 12 / 8 DRYSTAR 5302 Edition 1, Revision 0 Agfa Company Confidential…
  • Page 451
    Verband Deutscher Elektrotechniker. Association of German Electro-Technicians X-Terminal. An Agfa program for serial data communication between two computers. Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
  • Page 452
    Printed copies of this document are not controlled. The reader should always refer to MedNet to ensure that they are working with the latest copy of the document. Chapter 12 / 10 DRYSTAR 5302 Edition 1, Revision 0 Agfa Company Confidential…
  • Page 454
    This page is intentionally left blank to enable print out of even and odd pages on duplex printers.
  • Page 455
    Version 1.1 06-2008 Added how to integrate the order list for documentation in a printed manual. See section 1. Edition 1, Revision 2 06-2008 printed in Germany Document Node ID: 16099429 Agfa Company Confidential Copyright © 2008 Agfa HealthCare N.V.
  • Page 456
    It is recommended to print these pages separately on a DIN A3 or ANSI B (Ledger) printer. DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 Page 2 of 5 06-2008 Agfa Company Confidential…
  • Page 457
    Figure 2: Print dialogue for printing single pages or chapters DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 Page 3 of 5 06-2008 Agfa Company Confidential…

  • Page 458: Adding Comments

    This allows adding comments, to highlight or underline text and many more text manipulations. Figure 4: Adobe Reader comments toolbar DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 Page 4 of 5 06-2008 Agfa Company Confidential…

  • Page 459
    DOCUMENT CONTROL NOTE: The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled. Edition 1, Revision 2 Page 5 of 5 06-2008 Agfa Company Confidential…
Источник

Понравилась статья? Поделить с друзьями:

Интересное по теме:

  • Принтер dcp 7057r пишет ошибка картриджа
  • Принтер epson l110 ошибка замятие бумаги
  • Принтер dcp 7010r ошибка барабана
  • Принтер epson l110 выдает ошибку замятие бумаги
  • Принтер dcp 1602r ошибка замените тонер

    • Добавить комментарий

    ;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: